How to Download and Install Free Yoshimura PIM 2 Software
If you have a Yoshimura PIM 2 fuel injection controller for your off-road vehicle, you might want to download and install the free Yoshimura PIM 2 software to customize your fuel mapping and optimize your performance. The PIM 2 software allows you to adjust over 400 points of fuel injection in +/- 1% increments with full range mapping every 500 rpm at 10% throttle intervals[^3^]. You can also use the optional DATA self-mapping kit to automatically tune your fuel map based on your riding conditions[^3^]. Here are the steps to download and install the free Yoshimura PIM 2 software:
free yoshimura pim 2 software 34
Download File: https://guidifpauka.blogspot.com/?file=2vSWsU
Go to https://www.yoshimura-rd.com/pages/pim-2 and click on the "Download Software" button. You will be redirected to a page where you can choose your operating system (Windows or Mac) and download the software file[^4^].
Once the file is downloaded, run the installer and follow the instructions on the screen. You will need to accept the terms and conditions and choose a destination folder for the software. The installer will also create a shortcut on your desktop for easy access.
Connect your PIM 2 unit to your computer using the USB communication cable that came with your kit[^1^] [^2^]. Make sure your vehicle's battery is disconnected before connecting the PIM 2 unit.
Launch the PIM 2 software from your desktop or start menu. The software will automatically detect your PIM 2 unit and display its serial number and firmware version. You can also check for updates by clicking on the "Update" button.
To load a pre-made fuel map from Yoshimura, click on the "Load Map" button and choose a map file from your computer or from the online database. You can also create your own custom map by clicking on the "Edit Map" button and adjusting the values on the grid. You can save your map by clicking on the "Save Map" button.
To transfer your map to your PIM 2 unit, click on the "Send Map" button. The software will prompt you to confirm the transfer and show you a progress bar. Once the transfer is complete, you can disconnect your PIM 2 unit from your computer and reconnect your vehicle's battery.
To use the DATA self-mapping kit, you will need to install it on your vehicle according to the instructions that came with it. Then, you will need to enable the self-mapping mode on your PIM 2 unit by pressing and holding the "Mode" button until the LED flashes green. You can then ride your vehicle normally and let the DATA kit collect data and adjust your fuel map accordingly. To disable the self-mapping mode, press and hold the "Mode" button again until the LED stops flashing.
Congratulations! You have successfully downloaded and installed the free Yoshimura PIM 2 software and learned how to use it to customize your fuel mapping. For more information, please refer to the installation CD that came with your kit or visit https://www.yoshimura-rd.com/pages/pim-2.
e033bf56a8