How to Download and Install the Focus First Flash MS1690 Driver
The Focus First Flash MS1690 is a barcode scanner that can read both 1D and 2D codes. It has a high-resolution imaging system that can capture images of barcodes, signatures, and documents. To use the scanner with your computer, you need to download and install the driver that matches your operating system and USB interface.
focusfirstflashms1690driverdownload
Download File: https://www.google.com/url?q=https%3A%2F%2Furlin.us%2F2vQXAF&sa=D&sntz=1&usg=AOvVaw30s7cGOTg_bn2RmINeiFts
In this article, we will show you how to download and install the Focus First Flash MS1690 driver for Windows 10. We will also provide some troubleshooting tips in case you encounter any problems.
Step 1: Download the Driver
The first step is to download the driver from the official website of Honeywell, the manufacturer of the scanner. You can use this link[^1^] to access the download page. You will need to enter your product model number (MS1690) and select your operating system (Windows 10) from the drop-down menus. Then, click on the "Search" button.
You will see a list of available drivers for your scanner. Depending on your USB interface, you may need to choose between USB LS (low speed) or USB FS (full speed). You can check your USB interface by looking at the label on the bottom of your scanner. It should have a code like USB-38 or USB-106.
For example, if you have a USB LS interface, you should download the driver named "HSM USB Serial Driver r1.12.zip". If you have a USB FS interface, you should download the driver named "HSM USB COM Port Driver r1.12.zip". Click on the "Download" button next to the driver name and save the file to your computer.
Step 2: Install the Driver
The next step is to install the driver on your computer. To do this, you need to unzip the file that you downloaded in the previous step. You can use any software that can extract ZIP files, such as WinZip or 7-Zip. After extracting the file, you will see a folder with several files inside.
Open the folder and double-click on the file named "setup.exe". This will launch the installation wizard that will guide you through the process. Follow the instructions on the screen and accept the license agreement. When prompted, choose a destination folder for the driver files and click on "Install". The installation may take a few minutes to complete.
When the installation is finished, click on "Finish" and restart your computer. This will ensure that the driver is properly loaded and ready to use.
Step 3: Connect and Test Your Scanner
The final step is to connect and test your scanner with your computer. To do this, you need to plug your scanner into an available USB port on your computer. You should hear a sound indicating that your device is recognized by your computer.
To test your scanner, you can use any software that can read barcodes, such as Notepad or WordPad. Open the software and place your cursor where you want to enter the barcode data. Then, point your scanner at a barcode and press the trigger button. You should see the barcode data appear on your screen.
If your scanner works properly, congratulations! You have successfully downloaded and installed the Focus First Flash MS1690 driver for Windows 10. If you encounter any problems, please refer to the troubleshooting tips below.
Troubleshooting Tips
If your scanner does not work properly after following the steps above, here are some possible solutions:
Make sure that you have downloaded and installed the correct driver for your USB interface. If you have a USB LS interface, you need to use the HSM USB Serial Driver. If you have a USB FS interface, you need to use the HSM USB COM Port Driver.
Make sure that your scanner is connected to a working USB port on your computer. Try using a different port or a different cable if possible.
Make sure that your scanner is configured correctly for your barcode type and symbology. You can use the configuration guide[^1^]
e033bf56a8