Why do you need to flash your device?
There are many reasons why you may need to flash your device with a new flash file or firmware. Some of the common reasons are:
Your device is stuck on the boot logo or boot loop.
Your device is infected with malware or virus.
Your device is running slow or lagging.
Your device is having software issues or errors.
You want to upgrade or downgrade your device's software version.
You want to unroot or remove custom ROM from your device.
You want to reset your device to factory settings.
How to download and install Feltron F1099-D101 flash file or firmware?
To download and install Feltron F1099-D101 flash file or firmware, you will need the following tools and files:
A computer running Windows XP, 7, 8, 10, or Vista.
A USB cable to connect your device to the computer.
A backup of your personal data and files on your device.
A Feltron F1099-D101 flash file or firmware file.
A MediaTek USB VCOM driver.
A SP Flash Tool.
Once you have all the tools and files ready, follow these steps to flash your device:
Extract the Feltron F1099-D101 flash file or firmware file on your computer. You will get a folder with several files inside.
Install the MediaTek USB VCOM driver on your computer. This will allow your computer to recognize your device when connected.
Run the SP Flash Tool as administrator on your computer. This is a software that will help you flash your device with the firmware file.
Click on the "Download" tab on the SP Flash Tool interface.
Click on the "Scatter-loading" button and browse to the folder where you extracted the firmware file. Select the "MT6572_Android_scatter.txt" file and click "Open".
The SP Flash Tool will load all the files from the firmware folder. Make sure all the boxes are checked and the files are matched correctly.
Click on the "Download" button at the top of the SP Flash Tool interface.
Turn off your device and remove the battery if possible. Then connect your device to the computer using the USB cable.
The SP Flash Tool will detect your device and start flashing it with the firmware file. You will see a progress bar and a green circle when it is done.
Disconnect your device from the computer and insert the battery if removed. Then turn on your device and wait for it to boot up.
Congratulations! You have successfully flashed your Feltron F1099-D101 with the stock ROM. You can now enjoy a smooth and stable performance on your device.
Sources
: [Feltron F1099-D101 Flash File MT6572 4.4.2 Firmware](https://androidfilehost.com/?fid=745425885120766862) : [MediaTek USB VCOM Driver](https://androidfilehost.com/?fid=745425885120766862) : [SP Flash Tool](https://androidfilehost.com/?fid=745425885120766862)
a104e7fe7e