Design/Preparation process
Embedded Files
During our design on fusion we decided to change the base shape instead of half - arrowed circle we changed it to a complete circle
Base box face with T-slots
Base sides, i multiple it by 4 but each one extruded with different holes for the motors, the arduino and the power supply
Hoop Stand
Circular box cover
Top
Top
Hoop
Hoop
Media12.mp4Complete steps of projects` installing
Development/Implementation Process
Development/Implementation Process
our project is fully 2D design, we didn`t print any 3D shapes so we used the laser machine to cut our design.
Parameters used during cutting
After Cutting
Copy of Video from نوران 💡💡Cutting Process
Laser cutted parts
Mounting Components
Mounting Components
LCD & IR sensor in the front face
ARDUINO & H-bridge into the base
Base with 2 sides integrated
Motors on the sides
2 LCD and IR between the 2 faces
Hoop with the front face and hoop
If you succeed in this level (first one, easy) another one (level 2, difficult) will be waiting.
Bush button mounting
2 main parts of the project
MP4_20240211_162826VLOG (1).mp4Our First SUCCESSFUL Trial
TADAAAAAAAAAAAAA
MP4_20240216_000522VLOG.mp4Behind The Scenes
VID_20240211_175029.mp4Forgetting The Castor wheel
{Turning it into truck instead of basketball game😂}
VID_20240211_152614.mp4The sensor is not reading well
VID_20240211_152614.mp4A generous sensor that calculates one point by 2
Page updated
Google Sites
Report abuse