We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-04 · 8 min read · Independent comparison
If you want the simplest way to add low-latency wireless audio to the PS5 you already own, choose eppfun 5.3; if you need a complete, self-contained gaming headset with its own mic, drivers and battery — something you can also lean on for construction work — choose Gvyugke Gaming Headset. That is the whole decision in one line, and everything below explains why I land there.
• eppfun 5.3 — biggest strength: a plug-and-play Bluetooth 5.3 transmitter built on the Qualcomm QCC3056 chip, with APTX Adaptive and APTX Low Latency support that pulls audio lag down to under 60ms, roughly four times shorter than standard Bluetooth.
• eppfun 5.3 — biggest trade-off: it is not a headset. There are no drivers, no ear cups and no battery here — you must already own Bluetooth headphones or speakers to hear anything.
• Gvyugke Gaming Headset — biggest strength: a finished wireless PS5 headset with 50mm dynamic drivers, 3D surround sound, an ENC noise-reducing rotatable mic and up to 70 hours of battery.
• Gvyugke Gaming Headset — biggest trade-off: Bluetooth mode does not work on PS5 or PS4, and the mic does not work on Switch — console audio has to go through the included 2.4GHz dongle.
• Who each pick is for: eppfun 5.3 is for the person who already loves their headphones and just wants them working wirelessly on PS5, Switch or PC. Gvyugke is for the person who wants one box that solves everything — headset, mic and battery included.
Think of eppfun 5.3 as an adapter, not a product you wear. It is a small USB Type A dongle — roughly 1.81" long, 0.86" wide and 0.35" tall — that plugs into your PS5, PS4, Switch or PC and gives that device Bluetooth audio output it otherwise would not have. No drivers, no software, no menu digging. You plug it in, put your Bluetooth headphones or speaker into pairing mode, and the connection happens automatically. That is the entire setup, and for a lot of people that is exactly the appeal.
The real story is the codec support. Inside is the Qualcomm QCC3056 running Bluetooth 5.3, and it handles APTX Adaptive, APTX Low Latency, APTX and SBC, matching automatically to whatever your receiving device supports in that priority order. APTX LL is what matters most for gaming: lag drops below 60ms, versus roughly 220ms on standard Bluetooth. In practice that is the difference between gunfire that lands with the on-screen muzzle flash and gunfire that trails behind it. There is also a visible LED that shows which codec is currently active, so you can actually confirm what you are getting instead of guessing.
Two features stand out for everyday use. First, dual connection: it can pair two sets of headphones or speakers at once, which is genuinely useful for late-night TV with a partner or sharing audio at a small gathering. Second, physical push-button volume control on the dongle itself, so you are not hunting for a TV remote or pausing a game to dig through menus. A 3.5mm microphone is included and plugs into your controller for wireless voice chat, and the transmitter remembers your last call-mode setting between uses. One honest limitation: it does not support manual codec switching, and it is audio-only — no data. It also only makes sense if you already own a decent pair of Bluetooth headphones.
Buy it if: you have headphones you love, you want sub-60ms wireless audio on PS5 or Switch, and you want a five-second setup.
Skip it if: you need a microphone on your head, want a self-contained headset, or expect it to work with wired-only headphones.
Gvyugke Gaming Headset is the opposite philosophy: everything in one box. You get the headset, a 2.4GHz USB dongle, a 3.5mm cable, a Type-C charging cable and a manual. The 2.4GHz connection is the star for consoles — latency is rated at just 20ms, which is about as close to instant as wireless audio gets, and it works across PS5, PS4, Nintendo Switch, Steam Deck and PC. For competitive shooters, that near-instant sync is the whole point: footsteps, gunfire and directional cues arrive when they happen, not a beat later.
The audio hardware is a real step up from a bare adapter. Inside are 50mm dynamic drivers with 32 ohm impedance, tuned for a wide soundstage with detailed highs, rich mids and strong bass. It is over-ear with oval ear cups, built from ABS, PP and PU, and the comfort package is thoughtful: breathable protein leather, memory foam cushions and an adjustable headband, which matters if you wear glasses or sit through long sessions. The rotatable ENC noise-reducing microphone handles team chat, with a one-touch mute button on the left ear cup — note that this model uses button mute, not flip-to-mute.
Battery is where Gvyugke simply runs away with it. Up to 70 hours of play time, or 40–45 hours with the RGB accent lighting on, with a full charge in about 3 hours and pass-through charging so you can keep playing while it tops up. The foldable lay-flat design stores flat in a backpack, which makes it an easy travel and dorm companion, and Bluetooth 5.4 covers phones, tablets and the latest Switch at a range up to 32.8 feet.
But read the notes carefully, because they define who this is not for. Bluetooth does not work on PS5 or PS4 — console audio must go through the 2.4GHz dongle. The microphone does not work on Switch. The 2.4GHz dongle is built for official PS5 consoles, and third-party controllers may not be supported. Xbox is out entirely for wireless; you would need the 3.5mm cable. And if you were hoping to use Bluetooth mode on a PlayStation, that door is closed.
Skip it if: you mainly game on Xbox wirelessly, need mic support on Switch, or already own headphones you would rather keep using.
Side-by-Side: Which Should You Choose?
• Best for using your own headphones on PS5 → eppfun 5.3. It adds Bluetooth audio to the console; Gvyugke replaces your headphones entirely.
• Best for battery life → Gvyugke Gaming Headset. Up to 70 hours (40–45 with lighting), versus eppfun having no battery of its own at all.
• Best for the lowest latency on console → Gvyugke Gaming Headset. 20ms over 2.4GHz beats eppfun's sub-60ms APTX LL figure.
• Best as the best headset for construction work → Gvyugke Gaming Headset. A self-contained over-ear headset with its own mic, memory foam cushions and a foldable body travels to a site far more easily than a dongle that needs separate headphones.
• Best for dual-audio sharing → eppfun 5.3. It pairs two headphones or speakers simultaneously; Gvyugke connects one headset.
• Best for voice chat flexibility → eppfun 5.3. The included 3.5mm mic plugs into your controller and the call mode can be toggled on or off and remembered between sessions.
• Best for comfort across marathon sessions → Gvyugke Gaming Headset. Adjustable headband, breathable protein leather and memory foam are built for long wear.
• Best for travel and storage → Gvyugke Gaming Headset. The foldable lay-flat design is made for backpacks and dorms.
If you are buying for PS5 specifically and you want one product that just works, I would buy the Gvyugke Gaming Headset. In my opinion, 20ms latency over 2.4GHz, 50mm drivers, an ENC mic that rotates out of the way, and up to 70 hours of battery is a far more complete answer than an adapter — and for something like construction work, where you need a rugged, packable, self-contained headset with its own microphone and no loose parts to lose, Gvyugke is the pick. I would only steer you to eppfun 5.3 if you already own headphones you refuse to give up, or you specifically want two people listening at once. Check the current price on Amazon before you commit, since both sit in very different budget brackets.
how to use headphones for ps5
You have two realistic paths. With eppfun 5.3, plug the USB dongle into the PS5, put your Bluetooth headphones in pairing mode, and it connects automatically — the LED confirms the active codec. With Gvyugke, plug the 2.4GHz dongle into the console and power the headset on; Bluetooth is not supported for PS5 audio.
how to connect headphones for ps5
For eppfun 5.3: insert the USB Type A transmitter, then pair your headphones — no drivers or software needed. For Gvyugke: use the included 2.4GHz dongle, which is designed for official PS5 consoles. Third-party controllers may not be supported, and Xbox wireless is not supported on either path without the 3.5mm cable.
how to headphones ps5
The key constraint is that PS5 does not stream game audio over Bluetooth directly — that is why both products exist. eppfun 5.3 creates a Bluetooth link for headphones you already own, while Gvyugke bypasses Bluetooth on console entirely and runs lossless 2.4GHz audio at 20ms latency instead.
how to use bluetooth headphones for ps5
Use eppfun 5.3. It is built exactly for this: Bluetooth 5.3 with APTX Adaptive, APTX Low Latency, APTX and SBC, auto-matching the best codec your headphones support, with lag under 60ms. Gvyugke's Bluetooth 5.4 mode is for phones, tablets and the latest Switch — not PS5 or PS4.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: EKSA Fenrir S Gaming vs ONITOON Gaming Headset, SIMOLIO Kids-Headphones vs epekops AI, co2CREA Hard Case vs Bywulanda Upgrade USB Type, CN-Outlet Kids Headphones vs CHENRUIDA Ear Buds: Small on