How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-30 · 6 min read · Independent comparison
• EKSA 2.4GHz biggest strength: true wireless freedom — 2.4GHz lossless connection up to 49 feet, Bluetooth, ≤20ms latency, 52 hours of battery and a rotatable noise-canceling boom mic.
• EKSA 2.4GHz biggest trade-off: it's a full-size over-ear headset that can't be used while charging, and its wireless mode doesn't work with an Xbox controller (3.5mm wired only there).
• AIAUXAI Over Ear Earbuds biggest strength: zero setup, zero charging — a 3.5mm plug that works with almost any laptop, tablet, phone or handheld, plus a lightweight ear-hook fit.
• AIAUXAI Over Ear Earbuds biggest trade-off: it's wired only, so you're tethered to a 1.2m cable, and it relies on passive sound isolation rather than active noise cancellation.
• Who each pick is for: EKSA for anyone who wants wireless laptop audio, gaming and calls in one device; AIAUXAI for anyone who wants the simplest possible wired backup for a laptop or a pair to sweat in.
The EKSA E5BT is, at heart, a wireless laptop and gaming headset. The headline feature is the 2.4GHz lossless connection that reaches up to 49 feet in an unobstructed space, with latency of ≤20ms. For laptop use that matters a lot: a 2.4GHz dongle sidesteps the lag and pairing quirks you sometimes get over Bluetooth, and the low latency keeps audio locked to video during calls, streams and games. It also does Bluetooth, so you can pair it with a phone or tablet when you're away from the dongle. Note that the USB-A dongle needs the USB-C dongle attached to work, though the USB-C dongle works on its own — which is handy if your laptop only has USB-C.
Audio comes from 50mm dynamic drivers with a claimed 33% extra sound effect, covering 20Hz–20,000Hz at 16 ohm and 113dB sensitivity. In my opinion that points to a big, easy-to-drive sound that's tuned more for immersion than studio accuracy — good for hearing footsteps and directional cues. The microphone is the other reason to pick it: a 120° rotatable omni-directional boom with noise cancellation, which is exactly what you want for meetings and voice chat. Controls sit on the ear cup — power, 2.4G, Bluetooth, mic on/off, volume — so you're not hunting through menus.
Battery is the standout: 52 hours of use, 120+ hours standby, and a 3-hour charge. You get faux-leather over-ear pads, an adjustable headband and passive noise cancellation, plus a 2-year warranty. Buy it if you want one wireless headset for laptop work, calls and gaming. Skip it if you need to use it while charging (you can't, for safety), if you game on Xbox controllers wirelessly, or if you want something pocketable.
The AIAUXAI set is the opposite philosophy: wired, simple, and compatible with basically everything that has a 3.5mm jack. That list is genuinely broad — Samsung Galaxy phones, older iPhones, iPads, iPods, OnePlus, Motorola, Chromebooks, tablets, MP3 players, PS4, PS5, Macs and laptops. If your laptop still has a headphone jack, this is a plug-and-play solution with no pairing, no dongle and no battery to think about.
The design is an over-ear ear-hook with a 10mm dynamic driver, rated 20Hz–20,000Hz. Ten millimeters is small compared with the 50mm drivers in the EKSA, so I'd expect a lighter, more portable sound rather than deep, room-filling bass. The ear-hook shape is the real selling point: it's built to stay put during running and workouts, and the description emphasizes comfort over long wear. It uses sound isolation rather than active noise cancellation, which is normal at this design level — it will soften background noise, not erase it.
You also get a 1.2m TPE cable, a carrying case and two pairs of eartips, plus an in-line volume control on the remote. Buy it if you want a cheap, no-fuss wired set for a laptop, a tablet, a handheld console or exercise, or a backup pair that never needs charging. Skip it if you want wireless freedom, a boom mic for calls, or big-driver bass.
Side-by-Side: Which Should You Choose?
• Best for low-latency gaming → EKSA 2.4GHz. ≤20ms latency and 50mm drivers are built for directional audio in games.
• Best for calls and meetings → EKSA 2.4GHz. The 120° rotatable noise-canceling boom mic is the clear pick over a basic in-line mic.
• Best battery life → EKSA 2.4GHz. 52 hours of use and 120+ hours standby versus no battery at all.
• Best for plug-and-play simplicity → AIAUXAI Over Ear Earbuds. No pairing, no charging, no dongle — just a 3.5mm plug.
• Best for workouts and running → AIAUXAI Over Ear Earbuds. The ear-hook fit and lightweight build are made to stay in place during exercise.
• Best for the widest device compatibility → AIAUXAI Over Ear Earbuds. It works with anything that has a 3.5mm jack, from old iPhones to Chromebooks.
• Best value for a spare pair → AIAUXAI Over Ear Earbuds. A wired set with a case and spare tips is the lower-commitment buy, though you should check the current price on Amazon for both.
In my opinion, the EKSA 2.4GHz is the better buy for most people shopping for wireless headphones for a laptop. The 2.4GHz connection, ≤20ms latency, 52-hour battery and rotatable noise-canceling mic cover work, calls and gaming in one device, and the 2-year warranty adds peace of mind. I'd only steer you to the AIAUXAI Over Ear Earbuds if you specifically want a wired, charge-free set for workouts or a cheap backup. If you're on the fence, decide whether you want wireless freedom or a cable you never have to think about — that's the whole choice.
FAQ
how to connect wireless headphones laptop
On the EKSA, plug the USB-C dongle (or the USB-A dongle attached to it) into your laptop and switch to 2.4G mode — it connects automatically. You can also pair over Bluetooth 5 by putting the headset in pairing mode. Note the first pairing can take more than 10 seconds.
Turn the EKSA on, press the Bluetooth button to enter pairing mode, then select it in your laptop's Bluetooth settings. The 2.4GHz dongle route skips pairing entirely, which I'd recommend for lower latency. The AIAUXAI set isn't wireless — it just plugs into a 3.5mm jack.
how to connect wireless headphones to laptop windows 10
Go to Settings > Devices > Bluetooth & other devices, add a Bluetooth device, and pick the EKSA. If you'd rather avoid Bluetooth, use the USB dongle instead. Either way, no drivers are needed.
how to add wireless headphones to laptop
Add the EKSA through your laptop's Bluetooth menu, or simply insert the dongle for a plug-and-play 2.4GHz link. Remember the USB-A dongle only works with the USB-C dongle attached. The AIAUXAI needs no adding at all — it's a straight 3.5mm connection.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: HomeSpot JY508 vs EPOMAKER X Aula G7: Surround Sound, KTGEE Earbuds vs ZREVSB Earbuds Gen, Astro Gaming Logitech G vs Skullcandy SLYR Pro, JVC Black vs SOAR NBA: Sports Earbuds