This project aims to create a temperature controller at your house. It will first monitor the temperature of the current room you are in, then depending on if it is too hot or too cold, it will adjust the temperature accordingly in order to make sure it is at room temperature. The user chooses which mode the controller can be in, as it can be connected to a heater (too cold mode) or it can be connected to a fan (too hot mode). This is done by having a temperature sensor monitor and log the temperature of the room frequently in 10 second intervals. Then if a specific temperature is reached whether it is too hot or too cold, the microcontroller would command the servo to be activated which should be connected to either a fan or a heater where the button will be pressed.