How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a plug-and-play wired headset that never needs charging and works with virtually any PC or laptop, choose Easilent Work Headset; if you need a wireless, single-ear headset with all-day battery and dual-device Bluetooth, choose NANSLS Headset.
• Easilent Work Headset — biggest strength: Wired 3.5mm + USB-A connectivity means zero charging, zero pairing, and instant compatibility with desktops, laptops, and phones that still have a headphone jack.
• Easilent Work Headset — biggest trade-off: It's on-ear with sound isolation only, not active noise cancellation, and the cable ties you to your desk.
• NANSLS Headset — biggest strength: Up to 60 hours of playback and 45 hours of talk time on a 2-hour charge, plus Bluetooth dual-device connection so you can juggle a phone and a laptop at once.
• NANSLS Headset — biggest trade-off: Wireless-only design means no 3.5mm fallback, so a dead battery or a device without Bluetooth leaves you stuck.
• Pick Easilent if your day is meetings, WFH, or a shared office and you want a dependable corded setup.
• Pick NANSLS if you're on the road, in a truck, or constantly switching between phone and computer.
The Easilent Work Headset is a minimalist, wired on-ear headset built around one idea: plug it in and get to work. It connects through both a 3.5mm jack and USB-A, which is a genuinely useful combination. You can run it off a laptop's USB port, or use the 3.5mm plug with a phone, tablet, or any device that still has a headphone jack. No pairing menu, no Bluetooth dropouts, no "is it charged?" moment five minutes before a call. The in-line button control keeps mute and call handling within reach on the cable itself, and the noise-canceling mic is aimed at the everyday reality of meetings, Zoom calls, and open offices.
The frequency range runs a full 20Hz to 20,000Hz with a dynamic driver, so it's tuned to cover the whole audible spectrum rather than just voice. In practice that means it handles speech clearly while still being fine for background music or a video. The package includes a cable tie, protective case, wire clips, and a user manual — small things, but they tell you this is meant to be carried in a bag and used daily. It weighs 3.84 ounces, so it's light enough to forget you're wearing it during a long meeting block. The plastic on-ear build is black and deliberately plain, which fits its stated themes of work, calls, learning, and meetings. There's a 1-year warranty.
Who should buy it? Anyone whose work lives on a computer: remote workers, students in online classes, people in call centers or open-plan offices, and anyone who is tired of wireless headsets dying mid-meeting. It's also a strong fit if your machine is older or locked down and you don't want to fight with Bluetooth drivers.
Who should skip it? If you need to walk around while talking, or you take calls from a truck cab or a warehouse floor, the cable is a real limitation. And if you want true active noise cancellation rather than passive sound isolation, this isn't that product.
The NANSLS Headset takes the opposite approach: cut the cord and last as long as possible. It's a single-ear Bluetooth headset with an adjustable headband and a 270° rotatable mic, so you can wear it on either ear and swing the boom where your voice actually is. The ear cushion is soft and the whole thing is built for long wear — the kind of headset you put on at 8am and forget about. It uses Environmental Noise Cancellation (ENC) that the specs say reduces up to 98% of background noise, which is the feature that matters most if you take calls somewhere loud.
Battery is the headline here. A 2-hour charge gives you up to 60 hours of music playback, up to 45 hours of talk time, and up to 90 hours of standby. That's the difference between charging every night and charging once a week. Bluetooth range is 33 feet, which is enough to leave your phone on a desk and walk to the kitchen mid-call.
The dual-device connection is the sleeper feature. You can pair it to your phone and your laptop simultaneously and take calls from either without re-pairing. Controls are a mix of touch and push-button, and the controller list includes voice assistant support, so you can answer, reject, mute, adjust volume, redial, or skip tracks from the headset. The package includes the headset, a Type-C charging cable, a user manual, and a plastic carrying case with a silver finish. It's black, modern-styled, made from ABS, foam, and silicone, and carries a 1-year warranty. Note the audio specs list a 32-ohm impedance, a dynamic driver, and a frequency response listed at 2.48 KHz — that's a voice-first tuning, not a music-first one.
Who should buy it? Truck drivers, delivery and field workers, call center agents, and anyone who needs hands-free calls while moving around. It's also a good pick if you hate charging routines and want one headset that follows you between phone and PC.
Who should skip it? If your primary device has no Bluetooth, or if you want a stereo pair for music and video editing, a single-ear wireless headset isn't the tool. And if you'd rather never think about battery at all, it isn't either.
• Best for battery life → NANSLS Headset — up to 60 hours playback and 45 hours talk time versus a wired connection that needs no battery.
• Best for guaranteed compatibility → Easilent Work Headset — 3.5mm and USB-A covers almost any computer or phone with a jack.
• Best for noisy environments → NANSLS Headset — ENC noise reduction rated to cut up to 98% of background noise.
• Best for remote meetings and WFH on a laptop → Easilent Work Headset — plug in, mute on the cable, done.
• Best for people who move around while talking → NANSLS Headset — 33-foot Bluetooth range and no cable.
• Best for switching between phone and computer → NANSLS Headset — dual-device Bluetooth connection.
• Best for stereo listening and full-range audio → Easilent Work Headset — 20Hz–20,000Hz dynamic driver in an on-ear design.
• Best for travel and portability → NANSLS Headset — comes with a fitted carrying case and charges over Type-C.
In my opinion, the NANSLS Headset is the more versatile buy for most people, because the battery life, ENC noise reduction, and dual-device Bluetooth solve the three problems that actually ruin calls: dying batteries, background noise, and juggling devices. That said, I'd steer you to the Easilent Work Headset if your job is desk-bound. It never needs charging, it plugs into anything, and it's the quieter, simpler choice for a full day of Zoom and Teams. Match the headset to how you work, not to which one sounds fancier on paper.
how to use headphones with mic on pc
Plug the Easilent Work Headset in via USB-A or the 3.5mm jack, then open your sound settings and select it as both the input (microphone) and output device. For the NANSLS Headset, pair it over Bluetooth from your PC's Bluetooth menu and set it as the default communications device.
how to connect headphones with mic on pc
For wired headsets, connection is physical — USB-A or 3.5mm, and Windows or macOS usually recognizes it immediately. For the NANSLS Headset, enable Bluetooth on the PC, put the headset in pairing mode, and select it from the device list; it can hold two connections at once.
how to use headphones with mic on phone
The Easilent works through its 3.5mm jack on phones that still have a headphone port. The NANSLS Headset pairs over Bluetooth instead, which works on virtually any modern phone, and its dual-device support means you can stay connected to your phone and laptop together.
how to test headphones with mic
Join a test call or use your operating system's sound settings to record a short clip and play it back — that tells you whether the mic is picking up your voice. The Easilent has an in-line mute button and the NANSLS has one-touch mute, so test that the mute state matches what the call software shows.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Koss KPH40 vs Earbay Headphones: Lightweight Headphones, Generic Chendalize Noise Reducing vs BLXSounds A9, FILFEEL Earbuds vs Generic Ear Buds, SIMJAR Dinosaur Kids Headphones vs Boodlab Kids Headphones