If you want maximum battery life and an over-ear fit that can sit around your glasses instead of pressing on them, choose Anker Soundcore; if you need true wireless earbuds with strong ANC, a low-latency mode and clear call mics — a setup that suits glasses wearers who want nothing resting on their frames — choose EarFun Air Pro 3. That is the short version for anyone weighing earfun vs anker earbuds. The longer version comes down to one question: do you want headphones that cover your ears, or buds that sit inside them?
• Anker Soundcore Q20i — biggest strength: 40 hours of playtime with ANC on (60 hours in normal mode) and a 5-minute fast charge that adds roughly 4 hours, plus dual-device connection and an over-ear design.
• Anker Soundcore Q20i — biggest trade-off: It's a bulky over-ear headphone, ANC only works over Bluetooth (it pauses in AUX-in mode), and the earcups have to be adjusted carefully to seal properly around glasses.
• EarFun Air Pro 3 — biggest strength: Hybrid ANC rated to reduce noise up to 43dB, 6 mics with cVc 8.0 for calls, Bluetooth 5.3 multipoint and a 55ms low-latency mode, all in a pocketable in-ear design.
• EarFun Air Pro 3 — biggest trade-off: Battery is 9 hours per charge (45 total with the case), and aptX Adaptive audio doesn't work on iOS devices.
• Who each is for: Anker Soundcore suits commuters, remote workers and long-session listeners who want an over-ear fit; EarFun Air Pro 3 suits glasses wearers, call-heavy users and anyone who wants buds that leave their frames alone.
The Q20i is an over-ear Bluetooth headphone built around endurance. Four built-in mics handle hybrid active noise cancellation, and Anker states the system can reduce up to 90% of ambient noise. You get three modes — ANC, Normal and Transparency — switchable by a button or through the soundcore app. Battery life is the headline: 40 hours with ANC on, 60 hours in normal mode, and a 5-minute top-up gives you about 4 more hours. For someone who hates charging things, that's a genuinely relaxing spec.
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-21 · 6 min read · Independent comparison
Sound is handled by 40mm dynamic drivers with a 20Hz–40,000Hz frequency range. In wireless mode you get BassUp for punchy low end; plug in the included 3.5mm AUX cable and you unlock Hi-Res certified audio. Note the catch: ANC only works in Bluetooth mode and pauses automatically when wired. The memory foam protein-leather cushions are designed for long wear, and dual-device connection lets audio hop between your laptop and phone automatically — a real quality-of-life feature for remote workers.
Buy it if: you commute, work long stretches at a desk, or want one headphone that lasts days between charges. Skip it if: you want something pocketable, or you need noise cancelling while wired. And a practical note for glasses wearers — over-ear cups can press frames against your head, so plan to adjust the headband and ensure the pads fully cover your ears for a proper seal.
The Air Pro 3 is a true wireless earbud aimed at people who want a lot of technology in a small package. It runs on the Qualcomm QCC3071 chipset with aptX Adaptive audio and 11mm wool composite dynamic drivers, delivering deep bass, clear mids and crisp highs — though EarFun is upfront that iOS devices don't support aptX Adaptive. Hybrid ANC (QuietSmart 2.0) is rated to cut environmental noise by up to 43dB, and you can pick noise-cancelling modes to match your surroundings through the EarFun app.
Calls are a strong point on paper: 6 ENC microphones with Qualcomm cVc 8.0 work to isolate your voice and suppress wind and background noise. Bluetooth 5.3 handles multipoint between two devices, and a 55ms latency mode keeps games and video in sync. Battery is 9 hours per charge, 45 hours total with the USB-C case, which also supports wireless charging; 10 minutes of charging yields about 2 hours of listening. The app lets you tune a 10-band EQ, remap touch controls and update firmware.
Buy it if: you wear glasses and want nothing sitting on your frames, you take a lot of calls, or you game and watch video on the go. Skip it if: you're an iPhone user counting on aptX, or you want the multi-day battery of an over-ear.
• Best for battery life → Anker Soundcore. 40 hours with ANC on beats 9 hours per charge, even counting EarFun's 45-hour total with the case.
• Best for glasses wearers → EarFun Air Pro 3. In-ear buds avoid the earcup-on-frame pressure that over-ear headphones can cause; it's also the more natural fit if you're hunting for a gaming headset for glasses wearers.
• Best for calls → EarFun Air Pro 3. Six mics with cVc 8.0 ENC are purpose-built for voice pickup.
• Best for commuting ANC → a close call. EarFun quotes up to 43dB of reduction; Anker cites up to 90% ambient noise reduction. Different metrics, so judge by fit and preference — over-ear seals block more passively, buds are easier to carry.
• Best for gaming and video → EarFun Air Pro 3. The 55ms low-latency mode is designed for exactly that; the Q20i's strength is music and calls.
• Best for long desk sessions → Anker Soundcore. Memory foam cushions, dual-device switching and Transparency mode suit all-day office use.
• Best for wired listening → Anker Soundcore. The 3.5mm jack and Hi-Res mode are handy on flights — just remember ANC won't work wired.
• Best for families with kids → neither, strictly speaking. These are adult-oriented products; if you're after with mic kids headphones for glasses wearers, look for a dedicated kids' model with a boom mic rather than either of these.
One more scenario worth naming: if you're the type who wants a tiny bud that clips on and stays put under a helmet or hat — the "rotatable ear cups clip on earbuds for glasses wearers" kind of search — the Air Pro 3's in-ear design is the closer match here, though it uses standard silicone tips rather than any clip-on mechanism.
In my opinion, most people torn between these two should buy the EarFun Air Pro 3 — especially glasses wearers. The in-ear design keeps pressure off your frames, the ANC, six-mic call setup, multipoint and 55ms low-latency mode cover commuting, calls and gaming in one small package, and the 45-hour total playtime is plenty for daily use. I'd pick the Anker Soundcore Q20i instead if battery life and an over-ear fit matter more than portability — it's the better long-session, dual-device workhorse. Before deciding, check the current price on Amazon for both, since value is the one thing specs can't tell you.
FAQ
Yes, but without aptX Adaptive — EarFun states iOS devices aren't compatible with it, so you'd fall back to standard Bluetooth codecs. The ANC, multipoint, app EQ and call features still work.
It has a 3.5mm AUX jack for wired listening with Hi-Res audio, but ANC only works in Bluetooth mode and pauses when wired. A 5-minute charge adds roughly 4 hours, so topping up is quick.
In my opinion, in-ear like the EarFun Air Pro 3 is the safer bet — nothing presses on your frames. Over-ear cups like the Q20i can work if you adjust the headband and make sure the pads fully cover your ears, but the seal is fussier with glasses.
• PLT Poly Blackwire 3320 vs hadbleng Earbuds: Wireless Stereo
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.