v25n3

1. 박용 디젤엔진과 대기오염 ( Marine Diesel Engine and Air Pollution )

2. 박용 디젤기관의 배기규제 및 배기 배출물 저감 대책 ( Emissions Limits and Measures for Reducing Exhaust Emissions in Marine Diesel Engines )

3. 선박의 대기오염물질 배출 규제 및 대책 - 박용 디젤엔진의 질소산화물을 중심으로 - ( Regulations for the Prevention of air Pollution froms Ships - For Nox Emission from Marine Diesel Engines - )

4. 청정 에너지인 풍력과 태양광 발전현황 ( Present Status of Wind Energy and Photovoltaic Research as th Clean Energy )

5. 선박용 회전기계의 진동평가 규격 ( Vibration Evaluation Criteria of Rotating Machinery in Ships )

6. 선박에서 유체기계 및 환기성능평가를 위한 PIV의 적용 ( Application of PIV to Fluid Machinery and Assessment of Ventilation Performance in Ships )

7. 공기유동에 대한 고온상태의 비원형 도관내에서의 열전달 및 압력강하의 측정 ( Measurement of Heat Transfer and Friction Coefficients for Flow of Air in Noncircular Ducts At High Surface Temperature )

8. 디젤기관 추진축계의 연성진동에 관한 연구 - 제2보 강제 감쇠 연성진동 해석 ( Studies on Coupled Vibration of Diesel Engine Propulsion Shafting ( 2nd Report : Analyzing of Forced Vibration with Damping )

9. 소형 공조용 증발기의 특성 해석 ( Analysis of Characteristics on Small Air-Conditioning Type Evaporator )

10. 판형 열교환기의 열전달 및 압력강하 특성에 관한 연구 ( A Study on Heat Transfer and Pressure drop Characteristics in Plate Heat Exchangers )

11. 가열수 온도에 의한 저온진공건조 열적 특성에 관한 연구 ( A Study on the Thermal Characteristics of Low Temperature Vacuum Drying by Hot Water Temperature )

12. 핀-튜브 열교환기에서의 습증기 발생 메커니즘의 파악을 위한 실험적 연구 ( An Experimental Study on Understanding of Production Mechanism of a Mist from Fin-Tube Heat Exchanger )

13. 특성곡선법과 다중길이 척도법을 이용한 가솔린 기관의 기관성능시뮬레이션의 개선에 관한 연구 ( A Study on the Improvement of Engine Performance Simulation Using Multi-Length-Scale Model and MOC )

14. 필라멘트 와인딩 공법에 의한 소형 선박용 복합재로 축 설계를 위한 응력해석에 관한 연구 ( A Study on Stress Analysis for Design for Composties Shaft on Small Ship by Filament Winding Process )

15. 퍼지-LQ 제어기법을 이용한 강인한 제어시스템의 설계 ( Design of a Robust Control System Using the Fuzzy-LQ Control Technique )

16. 미소가속도계 센서의 재조공정에서 잔류응력 해석 ( Analysis of Residual Stresses at Manufacturing Processes for Microaccelerometer Sensors )

17. 연소실내의 2상유동 제어에 관한 연구 ( A Study of Two Phase Fowl Control in a Combustion Chamber )

18. 최적의 연료분사와 점화시기 제어를 위한 자동차 엔진용 전자제어장치 설계 및 개발 ( Design and Development of a Electronic Control Unit of the Automobile Engine for Optimal Fuel Injection and Spark Timing Control )