v22n4

1. 원심펌프의 진동설계 및 평가 ( Vibration Design and Assessment for Centrifugal Pumps )

2. 평면제트를 이용한 충돌면에서의 난류유동 특성 ( Turbulent Flow Characteristics using Plane Jet on Impingement Surface )

3. RNG k-ε 모델을 이용한 포트 / 밸브계 및 실린더내의 유동해석 ( Flow Analysis within a Port / Valve Assembly and Cylinder Using a RNG k-ε Model )

4. 열과 물질 전달을 수반하는 연속휜의 휜효율에 관한 연구 ( A Study on the Fin Efficiency of Continuous Fin with Combined Heat and Mass Transfer )

5. 음향섭동에 의한 후류유동의 제어 ( Wake Flow Control by Acoustic Perturbation )

6. 유한요소법을 활용한 압력용기의 설계 및 성형해석에 관한 연구 ( A Study on the Process Design and Deformation Analysis for Pressure Vessels by Finite Element Method )

7. PIV를 이용한 3차원 속도계측에 의한 유동장의 공간 및 벽면압력 분포 추정에 관한 연구 ( A Study on Estimation of Inner and Wall Pressure Distribution by 3-Dimensional Velocity Measurement using PIV )

8. 스크러버형 EGR시스템 디젤기관의 배기 추출물 특성에 관한 연구 ( A Study on the Characteristics of Exhaust Emissions in Diesel Engines with Scrubber EGR System )

9. 크리프 균열 진전 거동의 유한 요소 해석 ( Finite Element Analysis of Creep Crack Growth Behavior )

10. 유전알고리즘을 이용한 크레인 시스템의 최적제어 ( An Optimal Control of the Crane System Using a Genetic Algorithm )

11. 원관내 수직상향 2상유동에서 고분자물질이 유동양식에 미치는 영향 ( The Effect of Flow Patterns with Polymer Additives From Two Phase Flow at Vertical up Ward in Circular Tube )

12. 속도차가 존재하는 두 분류의 2상유동에 관한 연구 ( Study on Two Phase Flow of Two Jets Existing Velocity Difference )

13. 성장균열 형상에 대한 기초적 프랙탈 특성연구 ( A Fundamental Study of Fractal Characteristics for a Crack Growth Profile )

14. 구형용기의 상부면 냉각에 의한 해수 동결거동의 실험적 연구 ( An Experimental Study on Sea Water Freezing Behavior in a Rectangular Vessel Cooled From Above )

15. 저역통과 LC필터를 가진 전브리지형 인버터로 구동되는 3상 유도전동기의 속도제어 시스템에 관한 연구 ( A Study on the Speed Control System of a 3 Phase Induction Motor Dirven by the Full Bridge Inverter with a Low Pass LC Filter )

16. 단일액적의 증발 및 착화특성에 관한 연구 ( A Study of Evaporation and Ignition Characteristics of Singl Fuel Droplet )

17. 최적구조변경법에 의한 자동차 엔진 블록의 중량최소화에 관한 연구 ( A Study on the Weight Minimization of an Automobile Engine Block by Optimum Structural Modification )

18. 레이저 용접현상의 시간 · 공간고분해능 계측과 결함형성기구 및 방지법에 관한 연구 ( High Temporal and Spatial Resolution Measurements of Laser Welding Phenomena , and Formation Mechanisms of Defects and Their Suppression Methods )

19. 회사소개 : 한독크랭크공업사

    • 편집부