v19n3

1. 박용로 연구개발의 현황과 금후의 과제 ( Present Status and Problems of Marine Nuclear Reactor )

2. 가시용 직분식 디젤기관의 분무와 화염에 관한 연구 ( A Study on the Spray and Flame by Optically Accessible D. I. Diesel Engine - Analysis by Schlieren Method and Diffused Background Illumination Method - )

3. 저속 2행정 디젤 기관의 소기 특성에 관한 연구 ( A Study on the Scavenging Characteristics in Slow-Speed Two Stroke Diesel Engines )

4. 터보과급기 부착 디젤기관의 급가속 운전시 응답특성에 관한 연구 ( A Study on the Response Characteristics of a Turbocharged Diesel Engine under Operation Conditions of Rapid Acceleration )

5. 형상변경에 의한 최적구조변경법 ( The Optimum Structural Modification by Shape Changes )

6. 알루미나 ( Al_2_O_3_ ) 세라믹과 알루미늄 ( A1050 ) 과의 대기중 브레이징 접합에 관한 연구 ( A Study on the Brazed Bonding of Alumina Ceramic to Aluminum in the Air Atmosphere )

7. TiN 피복강재의 부식피로강도특성 ( Characteristics of Corrosion Fatigue Strength of TiN Coating Steel )

8. SUMT를 이용한 구속절삭조건의 문제에 관한 최적화 ( Optimization of the Constrained Machining Parameters Problem by the SUMT )

9. 규범모델 추종방식에 의한 회전계통의 적응속도제어에 관한 연구 ( A Study on the Adaptive Control of the Rotational Systems by Means of the Nominal Model Tracking Method )

10. 자기부상 시스템의 강인한 제어기 설계에 관한 연구 ( I ) - 시뮬레이션을 중심으로 - ( A Study on the Design of Robust Simulation Controller of Magnetic Levitation System ( I ) )

11. 벡터제어와 스칼라제어에 의한 유도전동기의 속도제어성능 비교 ( A Comparative Analysis of the Indirect Field-Oriented Control with a Scalar Method for IM Speed Control )

12. 하이브리드 인버터 설계 및 특성해석에 관한 연구 ( A Study on the Design and the Analysis of Hybrid Inverter )

13. 디지털 브리지형 인버터로 구동되는 저역통과 LC 필터를 가진 교류전동기의 전류 및 전력의 파형 개선 ( I ) ( The Current and Power Waveform Improvement of an AC Motor with Low Pass LC Filter Driven by a Digital Bridge Inverter ( I ) )