Suman Chatterjee, Ph.D.

List of SCI/Scopus Publications:

(*DOP: Date of Publication)

2024

1. Cholkar, A.S., Chatterjee, S., Jose, F., O'Connor, R., McCarthy, E., Weston, N., Kinahan, D. and Brabazon, D. 2024. Parametric Investigation of Ultrashort Pulsed Laser Surface Texturing on Aluminum Alloy 7075 for Hydrophobicity Enhancement. The International Journal of Advanced Manufacturing Technology, DOI: (accepted). DOP: (accepted). Impact Factor: 3.4. (accepted).

2023

2. Cholkar, A.S., Chatterjee, S., Richards, C., McCarthy, E., Perumal, G., Kinahan, D. and Brabazon, D. 2023. Biofouling and Corrosion Protection of Aluminum Alloys Through Ultrafast Laser Surface Texturing for Marine Applications. Advanced Materials Interfaces. 2300835 (1 of 14), DOI: doi.org/10.1002/admi.202300835. DOP: 26-December-2023. Impact Factor: 5.4. https://onlinelibrary.wiley.com/doi/10.1002/admi.202300835.

3. Cholkar, A.S., McCann, R., Perumal, G., Chatterjee, S., Swayne, M., Kinahan, D. and Brabazon, D. 2023. Advances in Laser-based Surface Texturing for Developing Antifouling Surfaces: A Comprehensive Review. Applied Surface Science Advances. 18, pp.100513, DOI: doi.org/10.1016/j.apsadv.2023.100513. DOP: 22-November-2023. Impact Factor: 6.2. https://www.sciencedirect.com/science/article/pii/S2666523923001472?via%3Dihub.

4. Chatterjee, S., Mahapatra, S.S., Xu, J. and Brabazon, D., 2023. Influence of Parameters on Performance Characteristics and Defects during Laser Micro Drilling of Titanium Alloys using RSM. The International Journal of Advanced Manufacturing Technology. 129, pp.4569–4587, DOI: doi.org/10.1007/s00170-023-12525-4. DOP: 08-November-2023. Impact Factor: 3.4. https://link.springer.com/article/10.1007/s00170-023-12525-4.

5. Chekotu, J.C., Degli-Alessandrini, G., Mughal, M.Z., Chatterjee, S., Goodall, R., Kinahan, D. and Brabazon, D. 2023. Control of Mechanical and Shape Memory Characteristics in Martensitic NiTi by setting L-PBF Parameters and Build Orientation. Journal of Materials Research and Technology 25, pp.6407-6431, DOI: https://doi.org/10.1016/j.jmrt.2023.07.092. DOP: 16-July-2023. Impact Factor: 6.4. https://www.sciencedirect.com/science/article/pii/S2238785423016204.

2022

6. Chatterjee, S., Trinh, L.N. and Lee, D. 2022. Mechanical and microstructural investigation of dissimilar joints of Al-Cu and Cu-Al metals using nanosecond laser. Journal of Mechanical Science and Technology. 36, pp.4205-4211, DOI: doi.org/10.1007/s12206-022-0738-x. DOP: 29-July-2022. Impact Factor: 1.810. https://link.springer.com/article/10.1007/s12206-022-0738-x.

7. Swain, B., Chatterjee, S., Mohapatra, S.S. and Behera, A. 2022. Mechanical Properties Evaluation and Parametric Optimization of Atmospheric Plasma Spray NiTi Coating. Journal of Materials Engineering and Performance. 31, pp.8270–8284, DOI: 10.1007/s11665-022-06834-0. DOP: 07-April-2022. Impact Factor: 1.819. https://link.springer.com/article/10.1007/s11665-022-06834-0 

8. Chatterjee, S., Mahapatra, S.S., Lamberti, L. and Pruncu, P. 2022. Prediction of Welding Responses using AI Approach: Adaptive Neuro Fuzzy Inference System and Genetic Programming. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 44(2), pp.1-15, DOI: 10.1007/s40430-021-03294-w. DOP: 13-January-2022. Impact Factor: 2.220. link.springer.com/article/10.1007%2Fs40430-021-03294-w 

2021

9. Zadafiya, K., Dinbandhu, Kumari, S., Chatterjee, S. and Abhishek, K. 2021. Recent Trends in Drilling of Carbon Fiber Reinforced Polymers (CFRPs): A State-of-the-art Review. Journal of Manufacturing Processes. 69, pp.47-68, DOI: doi.org/10.1016/j.jmapro.2021.07.029. DOP: 26-July-2021. Impact Factor: 5.01. www.sciencedirect.com/science/article/pii/S152661252100520X?dgcid=coauthor 

10. Chatterjee, S., Mahapatra, S.S., Bharadwaj, V., Upadhyay, B.N. and Bindra, K.S. 2021. Prediction of Quality Characteristics of Laser Drilled Holes using Artificial Intelligence Techniques. Engineering with Computers. 37(2), pp.1181-1204. DOI: doi.org/10.1007/s00366-019-00878-y. DOP: 07-April-2021. Impact Factor: 8.7. link.springer.com/article/10.1007/s00366-019-00878-y 

11. Zadafiya, K., Dinbandhu, Kumari, S., Chatterjee, S. and Abhishek, K. 2021. Recent Trends in Non-Traditional Machining of Shape Memory Alloys (SMAs): A Review. CIRP Journal of Manufacturing Science and Technology. 32, pp.217-227, DOI: doi.org/10.1016/j.cirpj.2021.01.003. DOP: 19-January-2021. Impact Factor: 3.602. www.sciencedirect.com/science/article/abs/pii/S1755581721000031 

2020

12. Chatterjee, S., Mahapatra, S.S., Bharadwaj, V.K., Upadhyaya, B.N. and Bindra, K.S. 2020. Comparative Study of Quality Characteristics of Weldments in Laser Fabrication of AISI 316 and Ti6Al4V using Fiber Nd:YAG Laser. Lasers in Engineering, 47(1-3), pp.133-159. DOP: 17-August-2020. Impact Factor: 0.34.

13. Chatterjee, S., Mahapatra, S.S., Bharadwaj, V.K., Upadhyaya, B.N. and Bindra, K.S. 2020. Estimation of Quality Characteristics of Laser Welded Thin Sheets of Titanium Alloy using Pulsed Nd:YAG Fiber Laser. Lasers in Engineering, 46(1-4), pp.111-134. DOP: 01 May 2020. Impact Factor: 0.34. 

14. Chatterjee, S., Mahapatra, S.S. and Abhishek, K., Experimental Evaluation for Improving Multiple Quality Characteristics of Drilled Holes: A Case Study on Drilling of Ti6Al4V. Journal of Advanced Manufacturing Systems. 19(1), pp. 189-214. doi.org/10.1142/S0219686720500109. DOP: 12-March-2020. Impact Factor: 1.26. www.worldscientific.com/doi/abs/10.1142/S0219686720500109 

15. Chatterjee, S., Sahoo, S.K., Swain, B., Mahapatra, S.S. and Roy, T. 2020. Quality Characterization of Dissimilar Laser Welded Joints of Ti6Al4V with AISI 304 by using Copper Deposition Technique. The International Journal of Advanced Manufacturing Technology. 106 (9), pp. 4577–4591.  DOI: https://doi.org/10.1007/s00170-020-04935-5. DOP: 23-January 2020. Impact Factor: 2.925. link.springer.com/article/10.1007/s00170-020-04935-5 

2019

16.  Pandey, A., Chatterjee, S. and Mahapatra, S.S. 2019. Analysis and Characterization of Weld Quality during Butt Welding through Friction Stir Welding. Indian Journal of Engineering & Materials Sciences, 26 (5-6), pp.298-310. DOP: 27-December-2019. Impact Factor: 0.881. nopr.niscair.res.in/handle/123456789/53512 

17. Yadav, R.K., Chatterjee, S., Abhishek, K. and Mahapatra, S.S. 2019. Assessment of Machinability of Inconel 718: A Comparative study of CVD & PVD Coated Tools. Indian Journal of Engineering & Materials Sciences, 26 (5-6), pp.281-297. DOP: 25-December-2019. Impact Factor: 0.881. nopr.niscair.res.in/handle/123456789/53513 

18. Chatterjee, S., Mahapatra, S.S., Bharadwaj, V.K., Upadhyaya, B.N., Bindra, K.S. and Thomas, J. 2019. Parametric Appraisal of Mechanical and Metallurgical Behavior of Butt Welded Joints using Pulsed Nd:YAG Laser on Thin Sheets of AISI 316. Optics and Laser Technology, 117, pp.186-199. DOI: doi.org/10.1016/j.optlastec.2019.04.004. DOP: 20-April-2019. Impact Factor: 3.867. www.sciencedirect.com/science/article/abs/pii/S0030399218319558 

2018

19. Chatterjee, S., Mahapatra, S.S., Bharadwaj, V.K., Choubey, A., Upadhyaya, B.N. and Bindra, K.S. 2018. Drilling of Micro-holes on Titanium Alloy using Pulsed Nd: YAG Laser: Parametric Appraisal and Prediction of Performance Characteristics. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233(8), pp.1872-1889. DOI: doi.org/10.1177/0954405418805604. DOP: 8-October 2018. Impact Factor: 2.610. journals.sagepub.com/doi/abs/10.1177/0954405418805604 

20. Chatterjee, S., Mahapatra, S.S., Bharadwaj, V.K., Choubey, A., Upadhyaya, B.N. and Bindra, K.S. 2018. Quality Evaluation of Micro Drilled Hole using Pulsed Nd:YAG Laser: A Case Study on AISI 316. Lasers in Manufacturing and Materials Processing, 5(3), pp.248-269. DOI: doi.org/10.1007/s40516-018-0067-1. DOP: 26 July 2018. Impact Factor: 1.24. link.springer.com/article/10.1007/s40516-018-0067-1 

21. Chatterjee, S., Mahapatra, S.S., Mondal, A. and Abhishek, K. 2018. An Experimental study on Drilling of Titanium Alloy using CO2 Laser. Sādhanā, 43(8), pp.131. DOP: 03-July-2018. Impact Factor: 0.769. link.springer.com/article/10.1007/s12046-018-0903-1 

2016

22. Chatterjee, S., Mahapatra, S.S. and Abhishek, K. 2016. Simulation and Optimization of Machining Parameters in Drilling of Titanium Alloys. Simulation Modelling Practice and Theory, 62, pp.31-48. DOI: doi.org/10.1016/j.simpat.2015.12.004. DOP: 19-February 2016. Impact Factor: 3.270. www.sciencedirect.com/science/article/abs/pii/S1569190X15001756 

List of Book:

1. Chatterjee, S., Mahapatra, S.S., A Study on Parametric Appraisal of Drilling on Biocompatible Materials: Drilling of Titanium Alloy and Stainless Steel. LAP LAMBERT Academic Publishing 2018. (Edited by: Suman Chatterjee, Siba Sankar Mahapatra). ISBN-13: 978-3659968914. https://www.amazon.com/Parametric-Appraisal-Drilling-Biocompatible-Materials/dp/3659968919.

Book Chapters Contributed:

1. Chatterjee, S., Behera, A., Xu, J., Evaluation of Dimensional Inaccuracy in 3D Printed Products: Brief Overview. Chapter No. 11; Book Chapter in: Smart 3D Nanoprinting Fundamentals, Materials, and Applications; CRC Press, Taylor & Francis, DOP: 18-August-2022. (Edited by: Ajit Behera, Tuan Anh Nguyen, Ram K. Gupta), 14 Pages. ISBN: 9781003189404. DOI: https://doi.org/10.1201/9781003189404. Book Link: https://www.taylorfrancis.com/books/edit/10.1201/9781003189404/smart-3d-nanoprinting-ajit-behera-tuan-anh-nguyen-ram-gupta.

2. Chatterjee, S., Xu, J., Huynh, T.V., Abhishek, K., Kumari, S., Behera, A., Performance of Smart Alloys in Manufacturing Processes during Subtractive and Additive Manufacturing: A Short Review on SMA and Metal Alloys. Chapter No. 14; Book Chapter in: Smart 3D Nanoprinting Fundamentals, Materials, and Applications; CRC Press, Taylor & Francis, DOP: 18-August-2022. (Edited by: Ajit Behera, Tuan Anh Nguyen, Ram K. Gupta), 8 Pages. ISBN: 9781003189404. DOI: https://doi.org/10.1201/9781003189404. Book Link: https://www.taylorfrancis.com/books/edit/10.1201/9781003189404/smart-3d-nanoprinting-ajit-behera-tuan-anh-nguyen-ram-gupta.

3. Mondal, A., Chatterjee, S., Mahapatra, S.S., Sahu, A.K., Prakash, C., Analysis of Machining Parameters in Drilling of Biocompatible Composite: HAp-HDPE and HAp-UHMWPE. Chapter No. 05; Book Chapter in: Additive, Subtractive, and Hybrid Technologies, Springer 2022. (Edited by: Chander Prakash, Sunpreet Singh, Seeram Ramakrishna), pp.59-76. ISBN: 978-3-030-99569-0. DOI: https://doi.org/10.1007/978-3-030-99569-0_5. Book Link: https://link.springer.com/book/10.1007/978-3-030-99569-0.

4. Chatterjee, S., Mahapatra, S.S., Behera, A., NiTi joining with other metallic materials. Chapter No. 18; Book Chapter in: Nickel-Titanium Smart Hybrid Materials: From Micro- to Nano-structured Alloys for Emerging Applications, Elsevier 2022. (Edited by: Sabu Thomas, Ajit Behera, Tuan Anh Nguyen), pp.379-398. ISBN: 9780323911733. DOI: https://doi.org/10.1016/B978-0-323-91173-3.00002-X. Book Link: https://www.elsevier.com/books/nickel-titanium-smart-hybrid-materials-from-micro-to-nano-structured-alloys-for-emerging-applications/thomas/978-0-323-91173-3. 

5. Behera, A., Chatterjee, S., Industrial Scale up Applications of Nanomaterials Recycling. Chapter No. 16; Book Chapter in: Nanomaterials Recycling, Elsevier 2021. (Edited by: Mahendra Rai, Tuan Anh Nguyen), pp.341-361. Paperback ISBN: 9780323909822. DOI: https://doi.org/10.1016/B978-0-323-90982-2.00015-9. Book Link: https://www.elsevier.com/books/nanomaterials-recycling/rai/978-0-323-90982-2.

6. Mansaram, M.V., Chatterjee, S., Dinbandhu, Sahu, A.K., Abhishek, K., Mahapatra, S.S., Analysis of Dimensional Accuracy of ABS M30 Built Parts Using FDM Process. Chapter No. 14; Book Chapter in: Recent Advances in Mechanical Infrastructure. Lecture Notes in Intelligent Transportation and Infrastructure, Springer Nature Singapore Ltd. 2021. (Edited by: Ajit Kumar Parwani, PL. Ramkumar, Kumar Abhishek, Saurabh Kumar Yadav), pp.173-181. ISBN: 9789813341760. DOI: https://doi.org/10.1007/978-981-33-4176-0_14. Book Link: link.springer.com/chapter/10.1007%2F978-981-33-4176-0_14 

7. Jadam, T., Panda, D., Chatterjee, S., Datta, S., Sahoo, S.K., Mishra, S.C., Performance of Microwave Irradiated WC-Co Insert during Dry Machining of Inconel 718 Superalloys. Chapter No. 6; Book Chapter in: Sustainable Manufacturing and Design, Publisher: Elsevier Inc. USA. (Edited by: Kaushik Kumar, Divya Zindani, and Paulo J. Davim). doi.org/10.1016/B978-0-12-822124-2.00006-8 DOP: 12th - January- 2021, ISBN: 9780128221617. DOI: https://doi.org/10.1016/B978-0-12-822124-2.00006-8. Book Link: https://www.elsevier.com/books/sustainable-manufacturing-and-design/kumar/978-0-12-822124-2. 

8. Yadav, M.K., Sahu, S.K., Chatterjee, S., Mahapatra, S.S., Experimental Studies on Friction Stir Welding of AA6061 Aluminum Alloy. Book Chapter in: Sustainable Manufacturing and Design, Publisher: Elsevier Inc. USA. (Edited by: Kaushik Kumar, Divya Zindani, and Paulo J. Davim). DOP: 12th - January- 2021, ISBN: 9780128221617. DOI: https://doi.org/10.1016/B978-0-12-822124-2.00007-X. Book Link: https://www.elsevier.com/books/sustainable-manufacturing-and-design/kumar/978-0-12-822124-2.

9. Chatterjee, S., Abhishek, K. and Mahapatra, S.S. Optimization of Quality Characteristics in Laser Drilling of Ti6Al4V using VIKOR. Lecture Notes in Intelligent Transportation and Infrastructure, Springer Nature Singapore Ltd. 2020. ISSN 2523-3459, pp.59-67. International Conference on Recent Advances in Mechanical Infrastructure (ICRAM-2019), IITRAM, Ahmedabad, April 20-21, 2019. DOI: https://doi.org/10.1007/978-981-32-9971-9. Book Link: link.springer.com/chapter/10.1007/978-981-32-9971-9_7 

10. Mohanty C.P., Singh M.R., Mahapatra S.S., Chatterjee S. (2015) A Particle Swarm Approach Embedded with Numerical Analysis for Multi-response Optimization in Electrical Discharge Machining. In: Panigrahi B., Suganthan P., Das S. (eds) Swarm, Evolutionary, and Memetic Computing. SEMCCO 2014. Lecture Notes in Computer Science, vol 8947. Springer, Cham. December 18, 2014. DOI: https://doi.org/10.1007/978-3-319-20294-5_7 2014. Book Link: link.springer.com/chapter/10.1007/978-3-319-20294-5_7 

List of Conferences and Proceedings:

International Conferences

1. 1. 1. Chatterjee, S., Cholkar, A.S., Kinahan, D. and Brabazon, D., 2024, February. Fabrication of Periodic Textures at Micron Level on Silicone Membrane Using Femtosecond Laser. In TMS Annual Meeting & Exhibition. Cham: Springer Nature Switzerland, 153rd Annual Meeting and Exhibition, Orlando, Florida, USA, March 3–7, 2024.

      2. Chatterjee, S., Cholkar, A.S., Kinahan, D. and Brabazon, D., 2023, February. Quality Assessment and Features of Microdrilled Holes in Aluminum Alloy Using Ultrafast Laser. In TMS Annual Meeting & Exhibition (pp. 380-386). Cham: Springer Nature Switzerland, 152nd Annual Meeting and Exhibition, San Diego, California, USA, March 19–23, 2023.

      3. Chatterjee, S., Lee, D., Seo, Y., Park, D., Brehe, M.R. and Jeon, S., Laser Ablation of SM490A using Pulsed Nanosecond Laser. Korean Society of Laser Processing (KSLP) Autumn Conference (2021), Gangneung, South Korea, November 18-19, 2021.

      4. Chatterjee, S., Lee, D. and Mahapatra, S.S., Experimental Investigation on Micro Drilling of Thin Sheets using Nd:YAG Laser. Korean Society of Mechanical Engineers (KSME) Fall Conference (2021), Gwangju, South Korea, November 03-05, 2021.

      5. Mahajan, M.V., Chatterjee, S., Dinbandhu, Sahu, A.K., Abhishek, K. and Mahapatra, S.S. Analysis of Dimensional Accuracy of ABS M30 Built Parts using FDM Process. International Conference on Recent Advances in Mechanical Infrastructure (ICRAM-2020), IITRAM, Ahmedabad, August 21-23, 2020.

      6. Chatterjee, S., Mahapatra, S.S., Sahu, A.K., Bhardwaj, V.K., Choubey, A., Upadhyay, B.N. and Bindra, K.S. Experimental Investigation of Quality Characteristics in Nd:YAG Laser Drilling of Stainless Steel (AISI 316). Materials Today: Proceedings 5 (2018) 4269–4276. International Conference on Materials Manufacturing and Modelling (ICMMM-2017), VIT, Vellore, March 9-11, 2017.

      7. Chatterjee, S., Mahapatra, S.S., Sahu, A.K., Bhardwaj, V.K., Choubey, A., Upadhyay, B.N. and Bindra, K.S. Experimental and Parametric Evaluation of Quality Characteristics in Nd:YAG Laser Micro-Drilling of Ti6Al4V and AISI 316. Proceedings of the ASME Gas Turbine India 2017, pp. V002T10A006-V002T10A006. ASME International Conference on Gas Turbine India 2017 (GTIndia-2017), Bangalore, December 7 - 8, 2017. 

      8. Srivastava, A., Mishra, D.K., Chatterjee, S., Datta, S., Biswal, B.B. and Mahapatra, S.S. Multi-Response Optimization during Electro-Discharge Machining of Super Alloy Inconel 718: Application of PCA-TOPSIS. Materials Today: Proceedings 5 (2018) 4269–4276. 6th International Conference on Materials Processing and Characterization (ICPMC-2017), Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad. March 17-19, 2018. 

      9. Sahu, A.K., Mahapatra, S.S. and Chatterjee, S. Optimization of Electrical discharge coating process using MOORA based Firefly algorithm. Proceedings of the ASME Gas Turbine India 2017, pp. V002T10A005-V002T10A005. ASME International Conference on Gas Turbine India 2017 (GTIndia-2017), Bangalore, December 7 - 8, 2017.

      10. Sahu, A.K., Mahapatra, S.S. and Chatterjee, S. Optimization of Electro-Discharge Coating Process using Harmony Search. Materials Today: Proceedings 5 (2018) 12673–12680. International Conference on Materials Manufacturing and Modelling (ICMMM-2017), VIT, Vellore, March 9-11, 2017. 

      11. Chatterjee, S., Abhishek, K. and Mahapatra, S.S. A Study on Surface Quality of Laser Drilled Holes: Parametric Optimization Using Harmony Search Algorithm. International Journal of Materials, Mechanics and Manufacturing (2017) 5(4), pp.251-254. 4th Asia Conference on Mechanical and Materials Engineering (ACMME-2016), Kuala Lumpur, July 14-15, 2016.

      12. Nayak, B.B., Mahapatra, S.S., Chatterjee, S. and Abhishek, K., 2015. Parametric Appraisal of WEDM using Harmony Search Algorithm. Materials Today: Proceedings, 2(4-5), pp.2562-2568. 4th International Conference on Materials Processing and Characterization (ICPMC-2015), Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad March 14-15, 2015.

      13. Abhishek, K., Chatterjee, S., Datta, S. and Mahapatra, S.S., 2015. Application of NSGA II for Optimization of Multi-performance Characteristics During Machining of GFRP (epoxy) Composites. Materials Today: Proceedings, 2(4-5), pp.2353-2358. 4th International Conference on Materials Processing and Characterization (ICPMC-2015), Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad, March 14-15, 2015.

      14. Chatterjee, S., Mondal, A.K., Mahapatra, S.S., Combined Approach for Studying the Parametric Effects on Quality of Holes Using RSM and PCA in Drilling of AISI-304 Stainless Steel, 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), Indian Institute of Technology, Guwahati, India. December 12-14, 2014.

      15. Chatterjee, S., Abhishek, K., Mahapatra, S.S., Datta, S. and Yadav, R.K. NSGA-II approach of optimization to study the effects of drilling parameters in AISI-304 stainless steel. Procedia Engineering, 97, pp.78-84. The 12th Edition of GCMM (GCMM 2014), VIT University, Vellore. December 8-10, 2014.

      16. Abhishek, K., Chatterjee, S., Datta, S. and Mahapatra, S.S., 2015. Parametric Optimization in Turning of CFRP (epoxy) Composites: A Case Experimental Research with Exploration of HS Algorithm, 6th International Conference on Mechanical and Electrical Technology (ICMET 2014), held in Bangkok, Thailand, 17-18 July 2014.

      17. Chatterjee, S., Abhishek, K., Yadav, R.K. and Mahapatra, S.S. Optimization of drilling process parameters by harmony search algorithm. In Recent Advances and Innovations in Engineering (ICRAIE-2014), Poornima University, Jaipur (pp. 1-5). IEEE. May 9-11, 2014.

National Conferences 

1. 1. 18. Chatterjee, S., Mahapatra, S.S., Bharadwaj, V.K., Choubey, A., Upadhyaya, B.N. and Bindra, K.S. Parametric evaluation of weldments of Ti6Al4V using Nd:YAG pulsed Laser, National Laser Symposium - 26, BARC, Mumbai, December 20 - 23, 2017.

      19. Sahu, A.K., Chatterjee, S., Nayak, P.K., Mahapatra, S.S. Study on effect of tool electrodes on surface finish during electrical discharge machining of Nitinol. IOP Conference Series: Materials Science and Engineering 338 012033. 7TH National Conference on Processing and Characterization of Materials, (NCPCM – 2017) National Institute of Technology Rourkela, India, December 08 - 09, 2017.

Reviewer in Peer-reviewed Journals (selective):

• • Optics and Laser Technology

  • Journal of Manufacturing Processes

  • Tribology International

  • Machines

  • Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

  • CIRP Journal of Manufacturing Science and Technology

  • Lasers in Manufacturing and Materials Processing

  • The International Journal of Advanced Manufacturing Technology

  • International Journal of Nanoparticles

  • Progress in Additive Manufacturing

  • Journal of Biomaterials Applications

  • Journal of Mechanical Science and Technology 

  • International Journal of Aerospace Engineering 

  • Materials Today: Proceedings

  • Defence Science Journal

  • SN Applied Sciences

Achievements & Other Activities:

• Postdoctoral Research Fellow in Dublin City University, Dublin, Ireland, in April 2022. 

• Postdoctoral Fellowship in Kongju National University, Cheonan, South Korea, in August 2021. 

• Best Presentation Award in DAE-BRNS National Laser Symposium (NLS-29) on 15th February 2021, organized by the Indian Laser Association at SVVV, Indore, India. 

• Awarded top cited paper for the year 2015 - 2019 by the publisher of the journal “Simulation Modelling Practice and Theory”. www.sciencedirect.com/science/article/abs/pii/S1569190X15001756 

• Awarded Indo-Chinese Government Scholarship 2019-20 for the research program.

• Scholarship for doctorate study by MHRD Government of India (2015-2019).

Memberships & Academic Participation:

• National Researcher Information System (NRIS), South Korea: National Researcher Number: 12808360 (Issue date: 06th September 2021)

• Indian Laser Association (ILA): Life Time Member; Membership No.: LM-1302 (8th March 2019 – No Expiry).

• American Society of Mechanical Engineers (ASME): Student Member; Membership No.: 102086625 (11th February 2017 – 30th September 2021).

• Indian Laser Association (ILA): Student Member; Membership No.: SM-238 (June 2015 – March 2020)

• Successfully completed ROOTS 3.0 (2019) and ROOTS 2.0 (2018) as an Event Manager organized by Cultural and Flim Society, Student Activity Centre, National Institute of Technology Rourkela. www.instagram.com/rootsnitrkl/?hl=en 

• Co-organized workshops DOEOT-2013, 2014, and 2015.

Useful Links:

Google Scholar: https://scholar.google.com/citations?hl=en&user=C7Z1ITIAAAAJ

 LinkedIn: https://www.linkedin.com/in/drsumanchatterjeeme/

Publons: https://publons.com/researcher/1513398/dr-suman-chatterjee/

Contact:

mrsumanmech@gmail.com