Download Usb Write Protection Removal Software

When you try to open a USB flash drive on your computer but receive the error message - the disk is write-protected, it means that your USB is physically locked, the operating system limits you from visiting the device, the registry entry, or the device itself is damaged. Consequently, you cannot visit or do any changes to your USB flash drive. The only way to resolve this issue is to remove its write protection.

Note that this operation may remove both the write-protection and data on your saved data from your USB flash drive. If it is so, reliable file recovery software can scan and bring your lost valuable USB data back with ease.

Download Zip 🔥 https://geags.com/2y2Qsq 🔥

Don't panic when you see the disk is write-protected on your USB drive. You can fix this by either removing write protection or using another disk. This works for USB, SD cards, and internal and external hard drives.

In this section, we'll walk you through the process of disabling write protection on a hard drive or a USB drive in Windows 11/10/8/7. We'll remove write protection from a USB drive in the following example.

Note: The fixes are listed from easy to complex. Follow them one by one to remove write protection from your USB flash drive, memory card, or computer HDD/SSD by yourself. If you know little about computers, don't worry. You can resort to the manual disk repair and data recovery services from EaseUS. Our professional technical team can help you solve system-related problems, including system failure, BSOD, unbootable devices, etc.

Sometimes, people add write protection to files on a storage device from being modified or erased. However, storage devices like USB flash drives, SD cards, and internal or external hard disks may become write-protected due to the following reasons:

Sometimes, when the USB drive or the SD card physical switch is locked, the device becomes write-protected on all PCs and devices you connect. Let's see how to use the physical control to remove the protection from SD card/USB:

After this, restart your PC and check if you can access and use the saved data on your USB or hard drive again. If you prefer a video tutorial, you can watch this video to fix the disk is write protected error.

If you don't consider yourself a pro-computer user and you're not familiar with command-lines, don't worry. There are graphical-based solutions to help you remove write-protection from your hard drives, USB drives, and even SD cards.

Registry Editor also works to fix USB, SD, or internal/external HDD/SSD write-protected errors. It is an advanced-level procedure, and if you aren't sure what you're doing, you should probably not use this method. A wrong tweak to your computer's registry can cause many issues.

When BitLocker is enabled on your hard drive partition, it protects your files with its encryption feature. To make changes to a BitLocker partition, you must remove the protection first. Here are the detailed steps to disable Bitlocker encryption and unlock your disk:

Download EaseUS Data Recovery Wizard to recover any lost data during the write protection removal. This software is also suitable for hard drive recovery, SD card recovery, USB drive recovery, and more.

If your camera is giving you a "write-protect" error message, it likely can't delete or save a photo file because it was designated "read-only" or "write-protected." Or, your memory card may have a locking tab activated, so it can't write new files to the card or delete old ones until you disable the locking tab.

Hello to all. First, let me mention that my forensic computer skills are average at best. Having said that, I think I should pass along something that happened to me, earlier today. It may help just a few of those that are experiencing this write-protected problem. First, a tad bit of background.

1.) At the time, I had 2 SanDisk Micro SDXC memory card adapters, that would have been originally included with my purchase of SanDisk Micro SDXC memory cards.

2.) On a particular day, I used one of the adapters, along with a SanDisk Micro memory card, and inserted it in the available slot in my desktop computer, in order to add some MP3 music/songs. Everything went find; songs downloaded correctly.

3.) A few days later, I repeated this process, but for some reason, my desktop would not allow the download, with a popup window informing me that the memory card was write protected. I removed and reinserted the micro memory card/adapter into the desktop slot several times, and I also removed and reinserted the micro memory card in the adapter several times. Each time afterwards, I got the same popup window, stating that the card was write protected.

4.) After researching this problem online, with no solutions that appeared to work for me, and on a whim, I removed the micro memory card from one of my adapters, and inserted it in the other adapter.

5.) Presto, the popup window did not appear, and I was able to download my music, just as I had been able to do a few days earlier. Obviously, I discarded the adapter that APPEARED to have caused the problem.

Regarding frustrating tech error messages, "This drive is write protected" is right up there with the infamous "PC LOAD LETTER." You're just trying to save some files, and suddenly, your USB drive is giving you an attitude?

You could grab another flash drive, especially if you have plenty of bulk USB drives. However, if you know how write protection works, you might be able to remove it! Let's learn a little about this flash drive feature and why it exists. Then, we'll show you six easy options for removing write protection on a USB.

Write protection mode is a hardware or software feature that prevents the files on a USB drive from being removed, copied or altered. It's also known as read-only mode. While the drive is in this mode, a user can access files, but can't modify them. That means no adding files, deleting files, copying files, editing files - you get the idea.

The answer depends on how the write protection on your USB drive is set up. On some drives, the write protection is configured using the mass storage controller chip firmware. At USB Memory Direct, we often add this feature at our clients' request. This write protection can't be removed, and we recommend you use another drive.

First, look for a tiny switch on the body of your drive. This is a write protection switch that puts your drive into write protect mode, and it can be easy to accidentally activate it in a pocket or backpack. All you'll need to do is flick the switch into the "off" position. Write protection switches are no longer common on new USB drives, but it's always worth checking.

Lastly, you can also try reformatting the USB drive to remove the write protection. This will delete all of the data on the drive, so make sure anything you want to save is backed up! Use our guides to learn how to format a USB on macOS or Windows 10.

I installed the drive, let it do the initial backup etc without problems. The next day I went to copy a file directly to it and got the write protected message. Drive properties, security properties etc. all showed that I should be able to write to it.

I simply unplugged the external drive. when plugging it back in, the WD SmartWare will show (not the actual drive). Open this and select unlock. I set up this password when first plugging in the drive the first time. I am now able to write and delete from the files on the HD.

I recently found my old Chromebook 15 CB3-531 and wanted to install Gallium on it. I enabled developer mode, but just read that write protection (which can only be turned by off by a screw) has to be turned off to use chrx. If I were to use a flash drive instead, would I still have to disable write protection? And if so, what are the steps to remove it

I have a problem with the write protection of Windows 7. All my files in my users folder are protected and it is impossible to remove. When I uncheck the checkbox, a progressbar runs threw but everything stays unchanged.I've also tried to change it in the command line with

Maybe it is a virus?

I saw joke-viruses like that. They lock files simply opening them in "lock read write" mode.Try Sysinternals' Handle.exe . If the files are locked with that method, Handle will give you the name of locker.

When you get write protection errors from a micro sd card here is a good chance the card has gone into protection mode and is hence forth unusable, there is no physical write protection on Micro SD cards. You can probably copy off the data but that's about it. If you can't format it in Windows then try doing it in a camera or other device, if that also fails then you know the card is tickets/bust.

This article was co-authored by wikiHow staff writer, Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher.

The wikiHow Tech Team also followed the article's instructions and verified that they work.

This article has been viewed 2,965,618 times.

Learn more...

This wikiHow article teaches you how to remove write protection from a file or removable storage item, which will allow you to edit the file's or item's contents. You must be using an administrator account to do this. Some types of removable storage, such as CD-Rs, have built-in write protection that cannot be disabled.

where we asume that /dev/sdb is the Physical disk device we're working on. If the device has partitions that are mounted as read-only, you should re-mount 'em as read-write in order to write data to them.

Guys I am absolutely getting my butt kicked by this write protection. I can see my share from windows and I can access my data from windows but I cannot create a new folder or change security permissions at all. Furthermore I cannot create any new shares. When I attempt to create a share I name it and leave a comment then hit accept then the name goes blank and nothing happens after that. I don't get warnings or errors. I'm using a fresh install of Unraid on a new USB with a fresh key as of last night (all of this was an attempt to fix these issues from my previous install). I have run the "New Permissions" tool which did nothing. I also ran a complete parity check just to make sure. The only share I care about (Media) is set as follows: Export = yes, Case Sensitive = Auto, Security = Public. I have been fighting this thing for 6 months and I'm ready to burn it down. Can anyone please point me in a direction? I've been using Unraid for nearly a decade and its been so reliable that I haven't had much cause to learn more than was absolutely necessary so I just don't know what to do at this point. ff782bc1db