MIDDLE STATIC PRESSURE CEILING MOUNTED DUCT

Unit ceiling duct dengan desain yang ramping untuk memudahkan instalasi

Tekanan statis eksternak yang dapat diatur
Laju aliran udara yang dapat diatur
Aliran udara otomatis
Desain yang ramping
Instalasi dan perawatan yang mudah

Middle Static Pressure Ceiling Mounted Duct Type FXSQ-PA

Middle external static pressure and slim design allow

flexible installations

Installation flexibility

Slim design

With a height of only 245 mm, installation is possible even in buildings with narrow ceiling spaces.

Design flexibility

Adjustable external static pressure

Using a DC fan motor, the external static pressure can be controlled within a range of 30 Pa* to 150 Pa.

*30 Pa–150 Pa for FXSQ20-40PAV4 50 Pa–150 Pa for FXSQ50-125PAV4 50 Pa–140 Pa for FXSQ140PAV4

Standard DC drain pump

DC drain pump is equipped as standard accessory with 850 mm lift.

Bottom suction possible

Bottom suction is possible which facilitate installation and maintenance. Wiring connections and maintenance of control box can be done from under the unit with an optional shield plate for side plate*, extending the degree of freedom for installation in the ceiling.

Air suction direction can be altered from rear to bottom suction.

*An optional shield plate for side plate is required if wiring connections and maintenance of control box are needed from under the unit. This option is only available for FXSQ20-125PA models.

Comfort

Switchable airflow rate

Control of the airflow rate can be selected from 3-step control.

Auto airflow rate

5-step airflow rate is automatically controlled in accordance with the difference between room temperature and set temperature. Auto airflow rate control can be selected with wired remote controller BRC1E63

Low operation sound level

Easy maintenance

Inspection and cleaning is facilitated by separating the drain pipe and inspection opening and by thedrain pan maintenance check hole.

An antibacterial treatment that uses silver ions has been applied to the drain pan, preventing thegrowth of slime,mould and bacteria that cause blockages and odours.

(The lifespan of a silver ion cartridge depends on the usage environment, but should be changed once every two to three years.)

Easy installation

Airflow rate auto adjustment function

During installation, even if the external static pressure changes due to a change in the duct route, the airflow can be automatically adjusted to within the unit’s external static pressure range.
Airflow rate can be controlled using a remote controller during test operation. It is automatically adjusted to the range between approximately ±10% of the rated H tap airflow.

Page updated

Google Sites

Report abuse