Provide control of individual left and right mixer channels and how they are inter-mixed.
Affect panning/balance (with or without left/right channel inter-mixing).
Phase invert one or both channels.
Enhance or reduce stereo information present in the input signal.
Apply mid-side processing to separate the center and side components of a stereo signal.
Apply delay, phase offset, and feedback effects to create spatial and modulation effects.
The Fruity Stereo Shaper can be used for a variety of purposes, such as:
Widening or narrowing the stereo image of a track or a mix.
Correcting phase issues or enhancing phase coherence.
Creating stereo effects from mono sources.
Adding depth and movement to sounds.
Isolating or enhancing specific elements of a stereo signal.
Creative sound design and experimentation.
How to Use the Fruity Stereo Shaper?
The Fruity Stereo Shaper can be loaded as an effect plugin in FL Studio. To load it, you can either:
Select it from the plugin database in the file browser ([1]).
Right-click on an empty mixer slot and choose "Select" -> "Fruity Stereo Shaper" from the menu ([2]).
Drag and drop it from the plugin picker onto a mixer slot ([3]).
Once loaded, you will see the Fruity Stereo Shaper interface, which consists of four sections:
The top section shows the input and output levels of the left and right channels, as well as the phase correlation meter. You can also mute or solo each channel by clicking on the L or R buttons.
The middle section contains four knobs that control the main parameters of the plugin: Pan, Mix, Phase, and Delay. You can also click on the arrow buttons to switch between different modes: Normal, Invert L, Invert R, Swap LR, Mid-Side, Side-Mid, Mid Only, Side Only, Mono L+R, Mono L-R.
The bottom section contains two sliders that control the feedback amount and polarity for each channel. You can also enable or disable feedback by clicking on the FB buttons.
The right section contains a preset selector and a menu button that opens additional options such as bypassing the plugin, saving or loading presets, accessing online help, etc.
To use the Fruity Stereo Shaper, you can either adjust the knobs and sliders manually or choose from one of the 16 presets that are included with the plugin. The presets are divided into four categories: Basic, Delay Effects, Phase Effects, and Special Effects. You can also create your own presets by saving your settings with a custom name.
The Fruity Stereo Shaper can be used on any type of audio signal, such as drums, synths, vocals, guitars, etc. However, some signals may benefit more from certain modes or settings than others. For example, if you want to widen a mono synth sound, you can use the Mid-Side mode and increase the Mix knob. If you want to create a stereo delay effect on a guitar, you can use the Normal mode and increase the Delay and Feedback knobs. If you want to correct the phase of a drum track, you can use the Invert L or Invert R modes and adjust the Phase knob. The possibilities are endless, and you can experiment with different combinations to achieve the desired result.
Tips and Tricks for Using the Fruity Stereo Shaper
Here are some tips and tricks for using the Fruity Stereo Shaper effectively and creatively:
Use the phase correlation meter to monitor the phase relationship between the left and right channels. A positive value means that the channels are in phase, while a negative value means that they are out of phase. A value close to zero means that the signal is mono or has very little stereo information. You can use the Phase knob to adjust the phase alignment of the channels.
Use the Mid-Side mode to process the center and side components of a stereo signal separately. You can use the Mix knob to balance between them, or use the Mid Only or Side Only modes to isolate them. This can be useful for enhancing or reducing the stereo width of a track or a mix, or for applying different effects to each component.
Use the Delay and Feedback knobs to create spatial and modulation effects such as ping-pong delay, chorus, flanger, etc. You can also use the feedback polarity sliders to create positive or negative feedback loops for each channel. Be careful not to set the feedback amount too high, as it can cause distortion or feedback squeals.
Use the Swap LR mode to reverse the left and right channels of a stereo signal. This can create interesting variations or contrasts in your sound. You can also automate this mode to create dynamic stereo effects.
Use the Mono L+R or Mono L-R modes to convert a stereo signal into a mono signal. The Mono L+R mode sums both channels together, while the Mono L-R mode subtracts one channel from another. The latter mode can be useful for removing vocals or other center-panned elements from a stereo mix.
Use the Fruity Stereo Shaper in combination with other FL Studio plugins or external plugins to create more complex and creative effects chains. For example, you can use an EQ plugin before or after the Fruity Stereo Shaper to shape the frequency spectrum of each channel differently. You can also use a compressor plugin after the Fruity Stereo Shaper to glue together the processed signal.
Conclusion
The Fruity Stereo Shaper is a powerful and versatile tool that can enhance your stereo processing skills and creativity. It can be used for both corrective and artistic purposes, and it offers a lot of control and flexibility over your sound. Whether you want to widen, narrow, invert, swap, delay, modulate, or isolate your stereo signal, you can do it with the Fruity Stereo Shaper. Try it out and see what you can come up with!
a104e7fe7e