Compiling main.c...
rcst7 main.c OBJECT(Debug\main.o) PIN("C:\Program Files (x86)\COSMIC\FSE_Compilers\CXSTM8\INC\STM8") PIN("C:\Program Files (x86)\COSMIC\FSE_Compilers\CXSTM8\INC\ST7") PIN("C:\Program Files (x86)\COSMIC\FSE_Compilers\CXSTM8\INC") WRV(0) STM8(SMALL) DEBUG DGC(page0) AUTO OT(0) PR(Debug\main.lst) CD CO SB LAOB PIN(..\..\downloads\downloaded\st8\stm8s103f3_spl-master\inc)
E Stm8 Registration Key
The command: "cxstm8 -istm8s_stdperiph_driver\inc -i..\..\stm8s_stdperiph_lib\libraries\stm8s_stdperiph_driver\inc +debug -pxp -no -l +mods0 -pp -iD:\Hstm8 -clDebug\ -coDebug\ stm8s_stdperiph_driver\src\stm8s_adc1.c " has failed, the returned value is: 1
Bro as you showed in end of video in which code is not actually uploaded ob the stm8s ....
I am getting that issue , i have seen your next tutorial also but still when i upload the normal blink code it compiles, shows sucessful uploading of code into programing ,data, option memory via STVP. But on board leds does not link.
Stlink programmer turns out red at first then i reset it and then it led turns out blue , but what i suppose no led blinks on onboard stm8.
Will be waiting for your reply if u want can send u video also via drive link
for those of you having compile errors you have to add the stm8s_config.h in you project directory else you'll keep getting compile errors you can find it in the standard peripheral library zip you downloaded open project folder you'll see STM8S_StdPheriph_Template you'll find the stm8s_config.h file there just copy that file to you project directory you don't have to include it in you code you only need stm8s.h included and it compiles successfully
Compiling d:\stm8ssaucefiles\delay.c...
cxstm8 -id:\stm8ssaucefiles +debug -pxp -no -l +mods0 -pp -i"C:\Program Files (x86)\COSMIC\FSE_Compilers\CXSTM8\Hstm8" -clDebug\ -coDebug\ d:\stm8ssaucefiles\delay.c
d:\stm8ssaucefiles\delay.c:
Compiling stm8_interrupt_vector.c...
cxstm8 -id:\stm8ssaucefiles +debug -pxp -no -l +mods0 -pp -i"C:\Program Files (x86)\COSMIC\FSE_Compilers\CXSTM8\Hstm8" -clDebug\ -coDebug\ stm8_interrupt_vector.c
stm8_interrupt_vector.c:
I am trying to implement simple spi communication between 2 stm8s. Sending 0x04( address of pin2) and passing the received data as argument to GPIO high function so that LED connected at PORT D PIN 2 will glow. Master code is working properly, degugging properly, but in slave the TXE is not becoming 1 and program is stuck there only. Does any one can help locating the problem if its in code?
stm8s_it.c
INTERRUPT_HANDLER(TIM3_UPD_OVF_BRK_IRQHandler, 15)
{
/* In order to detect unexpected events during development,
it is recommended to set a breakpoint on the following instruction.
*/
GPIO_WriteReverse(GPIOD,GPIO_PIN_3);
TimingDelay_Decrement();
I have a issue with ADC1 in stm8s105k4 device:for my project i have used ADC1 in scan mode (i have to measure two analog voltage),I used the code that you described in your course (Multi Channel ADC with Scan Mode).
I have enable AIN0(on PB0) and AIN1(on PB1) but the result is that only the reading on PB0 is continuos updated,the value on PB1 is updated only one time (after reset).
Do you have any suggestions?
Thanks!
Hi
I am using stm8s003f3 pin out board and with this code I am just testing output at micro controller pin 2 i.e. TX
I am testing this using an oscilloscope.
but not able to get any output
Can you please help?
Hi there, thanks for sharing. I learn alot thru your example, but I have encounter a problem with adc. Im currently using stm8l151k4t6. I wanna use the pin D7 as to read the voltage from my battery and monitor it (display on LCD). Can u please check where it goes wrong on my code?
yes the comic compiler was installed properly i even received a license file from my mail with the instructions to copy the license file to the license folder in the install directory if you fail to do this it will keep popping up for you to put in the license file. iincluded all the source files and header files as instructed i am working with the cheap stm8s103f i uncommented the stm8s103f in the stm8.h header file as you instructed and just to compile the main file it just throws me errors
d0d94e66b7