C.Y.Tsai*, C.W.Huang, "Novel algebraic formula based on Lambert W-function for contact load calculation in Hertzian cylinder-cylinder interactions," Journal of Mechanics, 41, 150-156, 2025. (SCIE, IF=1.5, Rank=115/170, Q3, Category: Mechanics)
C.Y.Tsai*, C.J.Liang, "Mathematical Modeling and Implementation of Power-Skiving for ZI-type Worm Machining," Journal of Manufacturing Processes, 136, 43-55, 2025. (SCIE, IF=6.1, Rank=12/68, Q1, Category: Engineering, Manufacturing)
C.Y.Tsai*, "Optimum error design and 5-axis CNC machining of preloaded roller-gear-cam in roller-drive system," Measurement, 241, 115715, 2025. (SCIE, IF=5.2, Rank=17/179, Q1, Category: Engineering, Multidisciplinary)
C.Y.Tsai*, Y.C.Chang, "Anovel design approach based on sequential-conjugate method for high-mesh-ratio harmonic drives with dual-conjugate profiles and polynomial wave generators," Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 239, 565–577, 2025. (SCIE, IF=1.8, Rank=99/180, Q3, Category: Engineering, Mechanical)
C.Y.Tsai*, C.H.Chang, "Quadratic Bézier curve method for continuous freeform optical surface design," Journal Of The Optical Society Of America A-Optics Image Science And Vision, 41, 1750-1760, 2024. (SCIE, IF=1.4, Rank=86/119, Q3, Category: Optics)
T.F.Chiang, W.N.Cheng, M.Bi.Lin, C.C.Cheng, C.Y.Tsai, "3D grinding mark simulation and its applications for silicon wafer grinding," International Journal of Advanced Manufacturing Technology, 130, 4415-4430, 2024. (SCIE, IF=2.9, Rank=29/68, Q2, Category: Engineering, Manufacturing)
C.Y.Tsai*, "Algebraic modeling of cylindrical interference-free power-skiving tool for involute internal gear cutting with tilt angle," Journal of manufacturing science and engineering-transactions of the ASME, 145, 091002, 2023. (SCI, IF=3.952, Rank=38/137, Q2, Category: Engineering, Mechanical)
C.Y.Tsai*, "Trajectory planning of semi-trailer truck vehicle based on algebraic general trajectory formula," IEEE Transactions on Intelligent Transportation Systems, 24, 1495-1501, 2023. (SCI, IF=9.551, Rank=4/138, Q1, Category: Civil)
C.Y.Tsai*, "Integrated mathematical approach for design and manufacturing of power-skiving tool for interference-free involute internal gear cutting," Mechanism and Machine Theory, 180, 105172, 2023. (SCI, IF=4.93, Rank=18/137, Q1, Category: Engineering, Mechanical)
C.Y.Tsai*, "Simple mathematical approach for analyzing gear tooth profile errors of different gears cut using same power-skiving tool," Mechanism and Machine Theory, 177, 105042, 2022. (SCI, IF=4.930, Rank=18/137, Q1, Category: Engineering, Mechanical)
C.Y.Tsai*, "Design of free-form trough reflector for solar thermal concentrator system based on quadratic Bézier curves," Optics Communications, 511, 128024, 2022. (SCI, IF=2.335, Rank=59/101, Q3, Category: Optics)
C.Y.Tsai*, "Error-free measurement method for 6-DOF systems via matrix decomposition approach," Applied Mathematical Modelling, 104, 188–204, 2022. (SCI, IF=5.336, Rank=7/108, Q1, Category: Mathematics, Interdisciplinary Applications)
C.Y.Tsai*, "Power-skiving tool design method for interference-free involute internal gear cutting," Mechanism and Machine Theory, 164, 104396, 2021. (SCI, IF=4.930, Rank=18/137, Q1, Category: Engineering, Mechanical)
J.C.Huang, C.S.Liu*, and C.Y.Tsai, "Calibration procedure of camera with multifocus zoom lens for three-dimensional scanning system," IEEE Access, 7, 106387-106398, 2021. (SCI, IF=3.476, Rank=105/276, Q2, Category: Engineering, Electrical & electronic)
C.Y.Tsai* and C.K.Sung, "A general algebraic trajectory formula of the semi-trailer truck vehicles," IEEE Transactions on Automation Science and Engineering, 18, 2156-2165, 2021. (SCI, IF=6.636, Rank=10/65, Q1, Category: Automation & control systems)
C.Y.Tsai*, "Gear module adjustment method for shrinkage compensation of injection molded plastic gears using single dedicated hob," Mechanism and Machine Theory, 140, 233-244, 2019. (SCI, IF=3.312, Rank=30/130, Q1, Category: Engineering, Mechanical)
C.Y.Tsai* and P.D.Lin, "Gear manufacturing using power-skiving method on six-axis CNC turn-mill machining center," International Journal of Advanced Manufacturing Technology, 95, 609-623, 2018. (SCI, IF=2.496, Rank=23/49, Q2, Category: Engineering, Manufacturing)
C.Y.Tsai*, "A novel design of an electric power-assisted bike based on helical gears," Transactions of the Canadian Society for Mechanical Engineering, 41, 845-854, 2017. (SCI, IF=0.248, Rank=123/128, Q4, Category: Engineering, Mechanical)
C.Y.Tsai*, "Refractive collimation beam shaper design and sensitivity analysis using free-form profile construction method," Journal Of The Optical Society Of America A-Optics Image Science And Vision, 34, 1236-1245, 2017. (SCI, IF=1.566, Rank=53/94, Q3, Category: Optics)
P.D.Lin* and C.Y.Tsai, "Paraxial ray-tracing equations for optical systems containing triangular prisms," Journal Of The Optical Society Of America A-Optics Image Science And Vision, 34, 361-369, 2017. (SCI, IF=1.566, Rank=53/94, Q3, Category: Optics)
C.Y.Tsai*, "Design of free-form reflector for vehicle LED low-beam headlamp," Optics Communications, 372, 1-13, 2016. (SCI, IF=1.588, Rank=52/92, Q3, Category: Optics)
C.Y.Tsai*, "Free-form surface design method for non-axial symmetrical reflectors producing arbitrary image patterns," Optical Engineering, 55, 075104-1-075104-8, 2016. (SCI, IF=1.082, Rank=68/92, Q3, Category: Optics)
C.Y.Tsai*, "Mathematical model for design and analysis of power skiving tool for involute gear cutting," Mechanism and Machine Theory, 101, 195-208, 2016. (SCI, IF=2.577, Rank=26/130, Q1, Category: Engineering, Mechanical)
C.Y.Tsai*, "Free-form surface design method for collimator TIR lens," Journal of the Optical Society of America A-Optics Image Science and Vision, 33, 785-792, 2016. (SCI, IF=1.621, Rank=51/92, Q3, Category: Optics)
C.Y.Tsai*, "Optimized solar thermal concentrator system based on free-form trough reflector," Solar Energy, 125, 146-160, 2016. (SCI, IF=4.018, Rank=21/90, Q1, Category: Energy & Fuels)
C.Y.Tsai*, "Improved irradiance distribution on high concentration solar cell using free-form concentrator," Solar Energy, 115, 694-707, 2015. (SCI, IF=3.685, Rank=22/88, Q1, Category: Energy & Fuels)
C.Y.Tsai*, "Enhanced irradiance distribution on solar cell using optimized variable-focus-parabolic concentrator," Optics Communications, 305, 221-227, 2013. (SCI, IF=1.542, Rank=34/82, Q2, Category: Optics)
C.Y.Tsai*, "Design of optically stable image reflector system," Applied Optics, 52, 5385-5392, 2013. (SCI, IF=1.649, Rank=29/82, Q2, Category: Optics)
C.Y.Tsai*, "Design and analysis of reflector for uniform light-emitting diode illuminance," Journal of the Optical Society of America A-Optics Image Science and Vision, 30, 993-1001, 2013. (SCI, IF=1.448, Rank=38/82, Q2, Category: Optics)
P.D.Lin* and C.Y.Tsai, "Determination of unit normal vectors of aspherical surfaces given unit directional vectors of incoming and outgoing rays: reply," Journal of the Optical Society of America A-Optics Image Science and Vision, 29, 1358-1358, 2012. (SCI, IF=1.562, Rank=30/77, Q2, Category: Optics)
P.D.Lin* and C.Y.Tsai, "Determination of first-order derivatives of skew-ray at aspherical surface," Journal of the Optical Society of America A-Optics Image Science and Vision, 29, 1141-1153, 2012. (SCI, IF=1.562, Rank=30/77, Q2, Category: Optics)
C.Y.Tsai* and P.D.Lin, "Optimized variable-focus-parabolic-trough reflector for solar thermal concentrator system," Solar Energy, 86, 1164-1172, 2012. (SCI, IF=2.475, Rank=26/81, Q2, Category: Energy & Fuels)
C.Y.Tsai*, "Exact analytical approach for six-degree-of-freedom measurement using image-orientation-change method," Journal of the Optical Society of America A-Optics Image Science and Vision, 29, 385-393, 2012. (SCI, IF=1.562, Rank=30/77, Q2, Category: Optics)
P.D.Lin* and C.Y.Tsai, "Determination of unit normal vectors of aspherical surfaces given unit directional vectors of incoming and outgoing rays," Journal of the Optical Society of America A-Optics Image Science and Vision, 29, 174-178, 2012. (SCI, IF=1.562, Rank=30/77, Q2, Category: Optics)
C.Y.Tsai*, "An eigenvalue-based approach for the design of reflector systems and prisms with a specified image orientation change," Applied Physics B-Lasers and Optics, 102, 235-242, 2011. (SCI, IF=2.189, Rank=15/77, Q1, Category: Optics)
C.Y.Tsai*, "Design of partially optically stable reflector systems and prisms," Applied Physics B-Lasers and Optics, 100, 883-890, 2010. (SCI, IF=2.239, Rank=15/78, Q1, Category: Optics)
C.Y.Tsai*, "A general calculation and sensitivity analysis of reflector scanning systems using skew ray tracing," Applied Physics B-Lasers and Optics, 98, 481-487, 2010. (SCI, IF=2.239, Rank=15/78, Q1, Category: Optics)
C.Y.Tsai*, "A general calculation of the 3-D disk of least confusion using skew ray tracing," Applied Physics B-Lasers and Optics, 96, 517-525, 2009. (SCI, IF=1.992, Rank=13/70, Q1, Category: Optics)
C.Y.Tsai* and P.D.Lin, "The mathematical models of the basic entities of multi-axis serial orthogonal machine tools using a modified Denavit-Hartenberg notation," International Journal of Advanced Manufacturing Technology, 42, 1016-1024, 2009. (SCI, IF=1.128, Rank=13/38, Q2, Category: Engineering, Manufacturing)
P.D.Lin* and C.Y.Tsai, "Skew ray tracing and sensitivity analysis of ellipsoidal optical boundary surfaces," Applied Mathematical Modelling, 32, 2526-2537, 2008. (SCI, IF=0.931, Rank=25/68, Q2, Category: Engineering, Multidisciplinary)
C.Y.Tsai* and P.D.Lin, "Design of optically stable reflector systems and prisms," Applied Optics, 47, 4158-4163, 2008. (SCI, IF=1.763, Rank=18/64, Q2, Category: Optics)
P.D.Lin* and C.Y.Tsai, "General method for determining the first order gradients of skew rays of optical systems with non-coplanar optical axes," Applied Physics B-Lasers and Optics, 91, 621-628, 2008. (SCI, IF=2.167, Rank=13/64, Q1, Category: Optics)
C.Y.Tsai*, P.D.Lin, and Y.L.Lo, "Prism design for image orientation changes by screw triangle method," Optics Letters, 33, 1081-1083, 2008. (SCI, IF=3.772, Rank=4/64, Q1, Category: Optics)
C.Y.Tsai* and P.D.Lin, "The determination of positions and orientations of a prism's surfaces based on image orientation change," Applied Physics B-Lasers and Optics, 91, 105-114, 2008. (SCI, IF=2.167, Rank=13/64, Q1, Category: Optics)
C.Y.Tsai* and P.D.Lin, "Analytical solutions for image orientation changes in prisms," Applied Optics, 46, 3087-3094, 2007. (SCI, IF=1.701, Rank=17/64, Q2, Category: Optics)
P.D.Lin* and C.Y.Tsai, "First-order gradients of skew rays of axis- symmetrical optical systems," Journal of the Optical Society of America A-Optics Image Science and Vision, 24, 776-784, 2007. (SCI, IF=1.776, Rank=15/64, Q1, Category: Optics)
C.Y.Tsai* and P.D.Lin, "Prism design based on changes in image orientation," Applied Optics, 45, 3951-3959, 2006. (SCI, IF=1.717, Rank=13/55, Q1, Category: Optics)
電動車時代強力刮齒加工技術之智慧化刀具設計製造與性能優化整合研究 (國科會一般型, 主持人, 2025/08/01 ~ 2027/07/31, )
特色領域研究中心計畫(3/5)(前瞻製造系統頂尖研究中心) (教育部專案型, 共同主持人, 2025/01/01 ~ 2025/12/31 )
AI驅動半導體晶圓研磨技術之開發與關鍵元件之智慧製造 (國科會一般型, 主持人, 2025/06/01 ~ 2027/05/31, )
電動輔助自行車之擺線減速系統開發及其輪廓修形之最佳化設計研究 (國科會產學合作, 主持人, 2025/06/01 ~ 2026/05/31, NSTC 114-2622-E-194-003)
強力刮齒後處理程式及誤差補償程式 (企業委託案, 主持人, 2025/02/01 ~ 2025/12/31, )
特色領域研究中心計畫(2/5)(前瞻製造系統頂尖研究中心) (教育部專案型, 共同主持人, 2024/01/01 ~ 2024/12/31 )
Dual-power Transmission System Development (企業委託案, 主持人, 2024/10/01 ~ 2024/12/31, )
電動雙馬達行星齒輪無段變速系統之開發 (國科會產學合作, 主持人, 2024/06/01 ~ 2025/05/31, NSTC 113-2622-E-194-003)
先進加減整合製造之虛實整合及技術深化(4/4) (國科會一般型, 共同主持人, 2024/06/01 ~ 2025/05/31, NSTC 113-2218-E-194-005)
Roller Drive設計軟體優化 (企業委託案, 主持人, 2024/04/01 ~ 2025/03/31, 113-01613-01)
特色領域研究中心計畫(1/5)(前瞻製造系統頂尖研究中心) (教育部專案型, 共同主持人, 2023/01/01 ~ 2023/12/31,)
先進加減整合製造之虛實整合及技術深化(3/4) (國科會一般型, 共同主持人, 2023/06/01 ~ 2024/05/31, NSTC 112-2218-E-194-007)
無切削干涉之齒輪強力刮齒刀具設計、刀具製作、刀具重磨、線上量測、及CNC加工技術之整合研究與開發 (國科會一般型, 主持人, 2023/08/01 ~ 2024/07/31, NSTC 112-2221-E-194-037)
五軸車銑複合機加工螺旋傘齒輪之刀具製作與NC後處理程式開發 (國科會產學合作, 主持人, 2023/06/01 ~ 2024/05/31, NSTC 112-2622-E-194-002)
助動自行車高減速比變速行星齒輪系之設計與開發 (科技部產學合作, 主持人, 2022/06/01 ~ 2023/05/31, MOST 111-2622-E-194-007)
前瞻製造系統頂尖研究中心(5/5) (科技部一般型, 共同主持人, 2022/03/01~2023/02/28, MOST 111-2634-F-194-002)
ATC平板凸輪應力分析程式開發 (企業委託案, 主持人, 2021/11/01 ~ 2022/10/31, 110-02352-01)
ATC滾齒凸輪應力分析程式開發 (企業委託案, 主持人, 2021/08/01 ~ 2022/07/31, 110-02124-01)
前瞻製造系統頂尖研究中心(4/5) (科技部一般型, 共同主持人, 2021/03/01 ~ 2022/02/28, MOST 110-2634-F-194-005)
複合式車削中心機之強力刮齒與滾齒的閉迴路製造之研究 (科技部一般型, 主持人, 2020/08/01 ~ 2023/07/31, MOST 109-2221-E-194-013-MY3)
導入最佳化設計於蝸桿蝸輪設計軟體之開發 (科技部產學合作, 主持人, 2020/06/01 ~ 2021/05/31, MOST 109-2622-E-194-001-CC3)
前瞻製造系統頂尖研究中心(3/5) (科技部一般型, 共同主持人, 2020/03/01 ~ 2021/02/28, MOST 109-2634-F-194-004)
前瞻製造系統頂尖研究中心(2/5) (科技部一般型, 共同主持人, 2019/03/01 ~ 2020/04/30, MOST 108-3017-F-194-001)
利用標準滾齒刀修正塑膠射出成型齒輪模具的收縮率補償計算與最佳化之研究 (科技部一般型, 主持人, 2019/08/01 ~ 2020/07/31, MOST 108-2221-E-150-025)
導入最佳化設計演算法於齒輪組負載與應力分析之專家系統開發 (科技部產學合作, 主持人, 2019/06/01 ~ 2020/05/31, MOST 108-2622-E-194-005-CC3)
Roller Drive應力分析與設計軟體開發 (企業委託案, 主持人, 2019/02/01 ~ 2020/07/31, 108-01426-01)
Roller Drive五軸加工程式開發 (企業委託案, 主持人, 2019/02/01 ~ 2019/08/31, 108-01425-01)
強力刮齒法之刀具設計、切削分析與實作 (科技部一般型, 主持人, 2018/08/01 ~ 2019/07/31, MOST 107-2221-E-194-049)
導入最佳化設計演算法於齒輪組設計之專家系統開發 (科技部產學合作, 主持人, 2018/06/01 ~ 2019/05/31, MOST 107-2622-E-194-009-CC3)
滾齒凸輪五軸加工程式開發 (企業委託案, 主持人, 2018/02/01 ~ 2019/01/31, 107-AF-042)
開發新的自由曲面設計方法於TIR透鏡之光學設計 (科技部一般型, 主持人, 2017/08/01 ~ 2018/07/31, MOST 106-2221-E-150-014)
整合強力刮齒刀具設計分析與NC程式後處理於六軸CNC車銑複合機 (科技部產學合作, 主持人, 2017/06/01 ~ 2018/05/31, MOST 106-2622-E-150-010-CC3)
一種新的自由曲面設計方法應用於汽車LED近光燈的光學設計之研究 (科技部一般型, 主持人, 2016/08/01 ~ 2017/07/31, MOST 105-2221-E-150-008)
應用強力刮齒法於車銑複合機之NC程式開發 (科技部產學合作, 主持人, 2016/06/01 ~ 2017/05/31, MOST 105-2622-E-150-010-CC3)
結合變焦拋物面及變焦雙曲面於複合式太陽能集光模組之設計 (科技部一般型, 主持人, 2015/08/01 ~ 2016/07/31, MOST 104-2221-E-150-057)
光學掃描系統之光斑畸變消除與掃描速度分析之研究 (科技部一般型, 主持人, 2014/08/01 ~ 2015/07/31, MOST 103-2221-E-150-010)
應用變焦抛物面於太陽能電池集光模組之研究 (國科會一般型, 主持人, 2013/08/01 ~ 2014/07/31, NSC 102-2221-E-150-013)
聚光型太陽能電池之集光模組之設計 (國科會一般型, 主持人, 2012/08/01 ~ 2013/07/31, NSC 101-2221-E-150-011)
電力助動自行車LED 車頭燈之光學設計 (國科會產學合作, 主持人, 2011/06/01 ~ 2012/05/31, NSC 100-2622-E-150-005-CC3)
利用成像位姿變化理論設計與分析六自由度光學量測系統 (國科會一般型, 主持人, 2011/08/01 ~ 2012/07/31, NSC 100-2221-E-150-022)
太陽能加熱系統之集光模組之設計 (國科會產學合作, 主持人, 2010/06/01 ~ 2011/05/31, NSC 99-2622-E-150-016-CC3)
具多功能之一般型反射式光學3-D掃描系統之研究 (國科會一般型, 主持人, 2010/08/01 ~ 20110/7/31, NSC 99-2221-E-150-005)
助動自行車扭力感應模組之分析與設計 (企業委託案, 主持人, 2009/12/01 ~ 2010/5/31, 98-AD-21)
應用歪斜光線追蹤法於光學系統的焦散面與模糊圓之分析建模及最佳化設計 (國科會一般型, 主持人, 2009/08/01 ~ 2010/07/31, NSC 98-2221-E-150-021)
應用歪斜光線追踪於反射式光學穩定系統之分析與設計 (國科會一般型, 主持人, 2008/08/01 ~ 2009/07/31, NSC 97-2218-E-150-004)
C.W.Huang, and C.Y.Tsai, "Exact analytical algebraic expressions for mathematical modeling of face milling spiral bevel gears on a five-axis CNC machine", Proceedings of the 10th World Congress on Mechanical, Chemical, and Material Engineering, Barcelona, Spain,2024。
柯昭頡、沈永雄、蔡忠佑,“二自由度3K型行星齒輪系之無段變速器設計",中國機械學會第40屆全國學術研討會,論文編號: B5-003,2023。
邱翌淳、黃慶瑋、蔡忠佑,“Roller Drive 三次元量床量測與誤差分析",2023中華民國力學學會第四十七屆全國力學會議,論文編號:S029001,2023。
李羽婷、張証皓、蔡忠佑,“非接觸式線雷射3D輪廓量測平台之建構與應用",2023中華民國力學學會第四十七屆全國力學會議,論文編號:S029002,2023。
史家榮、蔡志杰、蔡忠佑,“無干涉強力刮齒刀具設計與刀具製造",中華民國機構與機器原理學會第26屆全國機構與機器設計學術研討會,論文編號:14,2023。
李羽婷、黃慶偉、蔡忠佑,“半掛式聯結車輛運動軌跡之純解析數學建模與驗證",中華民國機構與機器原理學會第26屆全國機構與機器設計學術研討會,論文編號:13,2023。
許弘育、史家榮、邱翌淳、蔡忠佑,“滾齒與強力刮齒應用於五軸車銑複合機之雙層齒輪閉迴路製造技術開發",中華民國機構與機器原理學會第25屆全國機構與機器設計學術研討會,論文編號:007,2022。
梁長菁、李羽婷、李羽軒、蔡忠佑,“ZI 型蝸桿強力刮齒法 於車銑複合機之技術開發",中華民國機構與機器原理學會第25屆全國機構與機器設計學術研討會,論文編號:003,2022。
柯昭頡、蔡忠佑,“兩個自由度的 3K 行星齒輪系理論推導",中國機械工程學會第三十九屆全國學術研討會,論文編號:B5-002,2022。
劉晴榕、蔡忠佑,“以現有滾齒刀研磨並切削出具有模數微調之齒輪",台灣機電工程國際學會第七屆全國學術研討會,論文編號:100,2022。
施冠宇、許弘育、劉晴榕、蔡忠佑,“強力刮齒法應用於五軸車銑複合機之閉迴路製造技術開發",中國機械工程學會第三十八屆全國學術研討會,論文編號:D1-011,2021。
池冠霖、張雲濤、蔡忠佑,“利用矩陣分解法設計純解析的六自由度量測系統",中華民國機構與機器原理學會第24屆全國機構與機器設計學術研討會,論文編號:8,2021。
常峻閔、梁長菁、蔡忠佑,“Roller Drive機構設計、切削及應力分析",中華民國機構與機器原理學會第24屆全國機構與機器設計學術研討會,論文編號:7,2021。
池冠霖、蔡忠佑,“Prism Design for Imagle Orientation Changes by the Screw Triangle Method",中國機械工程學會第三十七屆全國學術研討會,論文編號:373,2020。
周志宇、常峻閔、蔡忠佑,“Roller Drive凸輪設計與三次元量床量測",中華民國機構與機器原理學會第23屆全國機構與機器設計學術研討會,論文編號:050,2020。
施冠宇、蔡忠佑,“滾齒凸輪之設計原理與切削路徑推導",中華民國機構與機器原理學會第23屆全國機構與機器設計學術研討會,論文編號:049,2020。
陳姿羽、蔡忠佑,“自行車動態測試之雙凸輪五連桿機構設計",第二十二屆全國機構與機器設計學術研討會,論文編號:28,2019。
呂庭豪、周志宇、蔡忠佑,“一種新的自由曲面設計方法應用於汽車LED近光燈的光學設計之研究",第二十二屆全國機構與機器設計學術研討會,論文編號:30,2019。
呂庭豪、周志宇、蔡忠佑,“整合強力刮齒刀具設計分析與NC程式後處理於六軸CNC車銑複合機",第二十二屆全國機構與機器設計學術研討會,論文編號:29,2019。
呂庭豪、周志宇、蔡忠佑,“滾齒凸輪之設計原理與切削路徑推導",第二十二屆全國機構與機器設計學術研討會,論文編號:27,2019。
周志宇、呂庭豪、蔡忠佑,“滾齒凸輪之設計原理與三次元量床量測路徑",第二十二屆全國機構與機器設計學術研討會,論文編號:25,2019。
廖德潭、蔡忠佑、江智煜、林昌進,“應用強力刮齒法於六軸工具機刮削內齒輪之研究",2017全國製造工程研討會,論文編號:SME29,2017。
王弘毅、蔡忠佑,“強力刮齒切削分析",2017全國製造工程研討會,論文編號:SME28,2017。
H.Y.Wang and C.Y.Tsai,“Design of free-from reflector for vehicle LED low-beam headlamp",International Symposium on Optomechatronic Technology 2017,,2017。
T.Y.Chen and C.Y.Tsai ,“Optimized solar thermal concentrator system based on free-form trough reflector",International Symposium on Optomechatronic Technology 2017,,2017。
潘葳妮、蔡忠佑,“新的自由曲面設計方法於準直TIR透鏡之應用",中國機械工程學會第三十三屆全國學術研討會,台灣新竹,工業技術研究院,論文編號:1130,2016。
王弘毅、蔡忠佑,“漸開線齒輪之強力刮齒刀具的設計與分析",台灣第三屆塑性加工研討會,台灣高雄,國立中山大學 ,論文編號:C1-3(35),2016。
曾文麗、蔡忠佑,“新式槽型自由曲面於加熱式太陽能集光器之設計",台灣第三屆塑性加工研討會,台灣高雄,國立中山大學 ,論文編號:A1-6(21),2016。
孫嘉佑、蔡忠佑,“自行車動態測試之機構設計",中國機械工程學會第三十二屆全國學術研討會,台灣高雄,高雄應用科技大學,論文編號:2126,2015。
廖世全、蔡忠佑,“二階擺線齒輪減速機構之設計與分析",中國機械工程學會第三十二屆全國學術研討會,台灣高雄,高雄應用科技大學,論文編號:0407,2015。
金家平、蔡忠佑,“非軸對稱反射面之自由曲面設計",中國機械工程學會第三十二屆全國學術研討會,台灣高雄,高雄應用科技大學,論文編號:0390,2015。
吳彥亞、蔡忠佑,“應用變焦拋物面於太陽能電池集光模組之光學設計",中國機械工程學會第三十一屆全國學術研討會,台灣台中,逢甲大學,論文編號:1333,2014。
金家平、蔡忠佑,“歪斜軸傳動機構之幾何設計",台灣第二屆塑性加工研討會,台灣雲林,虎尾科技大學 ,論文編號:TSTP07,2014。
張伯毅、吳彥亞、蔡忠佑,“非對稱汽車頭燈之參數化光學設計",台灣第二屆塑性加工研討會,台灣雲林,虎尾科技大學 ,論文編號:TSTP06,2014。
張伯毅、蔡忠佑,“汽車非對稱近光頭燈之光學設計",中國機械工程學會第三十屆全國學術研討會,台灣宜蘭,宜蘭大學,論文編號:1731,2013。
林鈺芸、蔡忠佑,“反射式成像穩定系統之光學設計",中國機械工程學會第三十屆全國學術研討會,台灣宜蘭,宜蘭大學,論文編號:1180,2013。
蔡忠佑、梁莉捐、蔡忠佑,“利用成像位姿變化理論設計與分析旋轉自由度之光學量測系統",中國機械工程學會第三十屆全國學術研討會,台灣宜蘭,宜蘭大學,論文編號:1179,2013。
蔡忠佑、林信宇、蔡忠佑,“聚光型太陽能電池之集光模組之設計",中國機械工程學會第廿九屆全國學術研討會,台灣高雄,中山大學,論文編號:1624,2012。
張家銘、蔡忠佑,“電力助動自行車LED 車頭燈之光學設計",中國機械工程學會第廿九屆全國學術研討會,台灣高雄,中山大學,論文編號:1548,2012。
黃竣鴻、蔡忠佑,“反射式半穩定系統與稜鏡之設計",中國機械工程學會第廿八屆全國學術研討會,台灣台中,中興大學,論文編號:E11-016,2011。
陳兆佑、蔡忠佑,“太陽能加熱系統之集光模組之設計",中國機械工程學會第廿八屆全國學術研討會,台灣台中,中興大學,論文編號:E09-033,2011。
陳兆佑、黃政傑、陳俊豪、蔡忠佑,“三次元量床空間精度之校正及補償",第十四屆全國機構與機器設計學術研討會, 台灣中壢,中央大學 ,論文編號:N-005,2011。
馮偉建、蔡忠佑,“應用歪斜光線追蹤法於最小模糊圓之研究",中國機械工程學會第廿七屆全國學術研討會,台灣台北,台北科技大學,論文編號:EE10-008,2010。
林曜淳、蔡忠佑,“反射式掃描系統之靈敏度分析",中國機械工程學會第廿七屆全國學術研討會,台灣台北,台北科技大學,論文編號:EE10-009,2010。
馮偉建、蔡忠佑,“利用歪斜光線追蹤法於散焦面之研究",第十八屆全國自動化科技研討會,臺灣中壢,中原大學,論文編號:A02-0010,2010。
林曜淳、蔡忠佑,“利用歪斜光線追蹤計算反射式掃描系統",第十八屆全國自動化科技研討會,臺灣中壢,中原大學,論文編號:A02-0009,2010。
薛鈞哲、蔡忠佑、林昌進,“稜鏡之光程梯度計算與分析",中國機械工程學會第廿六屆全國學術研討會,台灣台南,成功大學,論文編號:E10-006,2009。
蔡忠佑、薛鈞哲、林昌進,“以螺旋三角法於成像位姿之變化之稜鏡設計",中國機械工程學會第廿六屆全國學術研討會,台灣台南,成功大學,論文編號:E10-012,2009。
卓祐新、蔡忠佑,“反射式光學穩定系統與稜鏡之設計",中國機械工程學會第廿六屆全國學術研討會,台灣台南,成功大學,論文編號:E10-008,2009。
薛鈞哲、蔡忠佑、林昌進,“幾何光學的光程梯度計算與應用",中國機械工程學會第廿五屆全國學術研討會,台灣彰化,大葉大學,論文編號:CSME25-95,2008。
蔡忠佑、薛鈞哲、林昌進,“應用Right-angle及Roof稜鏡取代單一稜鏡成像之設計",中國機械工程學會第廿五屆全國學術研討會,台灣彰化,大葉大學,論文編號:CSME25-74,2008。
薛鈞哲、蔡忠佑、鍾明志、林昌進,“近軸光線矩陣追蹤法於三維光學系統之分析與設計",中國機械工程學會第廿四屆全國學術研討會,台灣中壢,中原大學,論文編號:E09-0013,2007。
蔡忠佑、薛鈞哲、鍾明志、林昌進,“稜鏡成像位姿設計之解析解",中國機械工程學會第廿四屆全國學術研討會,台灣中壢,中原大學,論文編號:E09-0010,2007。
宋旗桂、蔡忠佑、林昌進、林穀欽,“近軸光線之照像機校正",中國機械工程學會第廿三屆全國學術研討會,台灣台南,崑山科技大學,論文編號:E4-016,pp. 120-125,2006。
蔡忠佑、宋旗桂、薛鈞哲、林昌進,“稜鏡成像位姿變化之分析建模與設計",中國機械工程學會第廿三屆全國學術研討會,台灣台南,崑山科技大學,論文編號:E4-011,pp. 90-95,2006。
C.Y.Tsai, C.K.Sung, P.D.Lin, and K.F.Ehmann,“A new camera calibration method and its applications",Proceedings of ICAM2005: 2005 International Conference on Advanced Manufacture ,,2005。
蔡忠佑、林昌進,“矩陣分解法於稜鏡設計之應用",中國機械工程學會第廿二屆全國學術研討會,台灣中壢,中央大學,論文編號:E4-005,pp. 532-538,2005。