Gp340 programming software 28
The Motorola GP340 is a professional two-way radio that offers a range of features and functions for reliable communication. The GP340 can be programmed with up to 16 channels and various settings such as frequency, power, squelch, scan, and encryption. To program the GP340, you need the following items:
Gp340 Programming Software 28
A compatible computer with a USB or RS232 port.
The Motorola GP340/GM340 programming software, which can be downloaded from Radiotronics or other sources .
A programming cable kit that connects the radio to the computer. The kit consists of a RIB (radio interface) box and a cable that matches the radio model. You can buy the cable kit from Radiotronics or other suppliers.
Once you have the required items, you can follow these steps to program your GP340:
Install the programming software on your computer by running the setup file and following the instructions.
Connect the RIB box to the computer's USB or RS232 port using an adapter if needed.
Connect the cable to the RIB box and the radio. Make sure the radio is turned off before connecting it.
Launch the programming software and select the appropriate COM port for the RIB box.
Click on Read Device to read the current settings from the radio. You may need to enter a password if the radio is protected.
Edit the settings as desired using the software interface. You can change the channel frequency, power, squelch, scan, encryption, and other parameters. You can also add or delete channels as needed.
Click on Write Device to save the new settings to the radio. You may need to enter a password again if the radio is protected.
Disconnect the cable and the RIB box from the radio and the computer. Turn on the radio and test its functionality.
Congratulations! You have successfully programmed your GP340 using the programming software 28. For more information and support, you can join the Facebook group for Motorola GP340/HT750 series radios or watch this video tutorial.
524038ac18