Embedded Files
SPEED-1500 Press Compression procedure
Equipment
in the hatch
・SPEED-1500 press
・Main ram oil system
outside the hatch
・Main ram control system
Compression Procedure
Step 1. Set the cell on the lower guide block
Step 2. Insert the lower guide block into the press
Step 3. Move the upper guide block closer using the pendant
Step 4. Setting the pressurization program
Step 5. Run the program and pressurize
Step 1. Set the cell assembly on the lower guide block
Step 1. Set the cell assembly on the lower guide block
Step 2. Make sure the collimator is in the retracted position and Insert the lower guide block into the press by Operating the compressed air valve.
Step 2. Make sure the collimator is in the retracted position and Insert the lower guide block into the press by Operating the compressed air valve.
Step 3. Bring the upper guide block closer using the pendant
Step 3. Bring the upper guide block closer using the pendant
The pendant cannot be used when the remote button is off. Please set the touch panel to Manual Control and/or press the remote button.
Step 4. Set the pressurization program
Step 4. Set the pressurization program
Step 5. Run the program and pressurize using touch panel on the main oil system at outside of hatch.
Step 5. Run the program and pressurize using touch panel on the main oil system at outside of hatch.
Page updated
Google Sites
Report abuse