To use Autocom CDP with a PC, you need to install the Autocom software and the USB driver. The Autocom software can be either CARS or GENERIC, depending on the type of vehicles you want to diagnose. The USB driver allows the PC to communicate with the Autocom CDP device via the USB port.
How to install Autocom CDP USB Driver
The installation process of the Autocom CDP USB Driver is simple and straightforward. Here are the steps you need to follow:
Insert the attached USB security dongle into the USB port of the PC. The dongle will control what installations are available.
Follow the instructions in the installation wizard. The License Activation Tool (LAT) will start automatically and connect to the Internet to retrieve accurate license information for the unique VCI serial number.
Select the option to install the USB driver when prompted by the wizard. The driver will be installed automatically.
Connect the Autocom CDP device to the PC using the USB cable. The PC will recognize the device and assign a COM port to it.
Launch the Autocom software and select the COM port that corresponds to the Autocom CDP device. You can now start diagnosing vehicles with your Autocom CDP device.
Note: If you encounter any problems with the installation or operation of the Autocom CDP USB Driver, you can contact Autocom support for assistance. You can also check their website for more information and updates.
References
: [CLASSIC/CDP+ - Autocom Diagnostic Partner AB](^2^)
: [Software installation - Autocom Diagnostic Partner AB](^1^)
: [Software installation - Autocom Diagnostic Partner AB](^1^)
: [Instalare drivere Autocom CDP+ USB / Install Autocom CDP+ USB drivers ...](^3^)
: [Contact - Autocom Diagnostic Partner AB](https://autocom.se/en/contact/)
: [Releases - Autocom Diagnostic Partner AB](https://autocom.se/en/releases/)
0493d141df