The 4 Best Circular Saw Tools Reviews and Buying guide

A circular saw is a machine that consists of an electric motor and a circular metal blade with several teeth, which rotates at high speed and can cut different materials.

If you like carpentry, want to do small repairs or need to cut professionally without spending much, circular saws are an excellent tool for this.

On this website you will find information and comparisons of the best, as well as other details you should take into account when buying one.

Before continuing, we have prepared the following comparative table in which you can quickly see which are the best circular saws.

To find out more, we recommend you click on see price , since it is possible to find excellent discounts on Amazon.com

Buy circular saw What characteristics should you look for?

The ideal is that you acquire a product that suits your needs; since a circular saw that only allows you to make a deep cut at different angles is not the same as a saw with a limited range of sawing in different materials , whose width or thickness of the material, require a more powerful motor and of a larger sheet.

Therefore, these are some of the characteristics that you have to take into account:

1. The price of a circular saw

This tool is located within a wide price range , so it is good that you establish a budget that helps you narrow down the search.

The cheapest circular saws are below 100 euros, but the models of better quality, greater engine power, and with a greater amount of benefits at a professional level, can cost between 120 and 400 euros .

2.Which pieces are you going to cut?

It is not the same to cut a small diameter pipe, to a large, robust and somewhat heavy piece of metal. So, depending on the piece to be cut, this is how you must consider the power of the motor. In this way, for more professional and demanding jobs, the ideal is to use a saw with a powerful motor, about 1400 V and greater reach.

On the contrary, if it is only light materials, a 400 W motor and about 3400 rpm are enough ; found on smaller, hand-held saws.

3. What other characteristics are important when it comes to knowing which circular saw to buy?

When it comes to other characteristics that it must, it talks about accessories such as suction adapters for the waste material that is going to be cut; the sound that, measured in decibels, is important for a quality saw.

Nor should we forget that, when choosing a circular saw; we must choose one that can be easily manipulated .

In short, the best circular saw largely depends on what you are going to use it for and what your budget is.

Best 4 Circular Saws 2020 Reviews and Guide

1. Bosch GKS 65 circular saw

Model that, thanks to its weight of 4.8 kg, and its grip with non-slip handle, is very light to manipulate manually.

It has the properties of optimized guidance of chips and turbo blower, which removes the residues of the cuts on the line of marking, so that it can be seen, and thus, obtain a precise cut; thanks to its 1600 W motor and 5900 rpm blade turning speed.

The diameter of the 190 mm blade makes it an instrument for professional use, facilitating cutting on large wooden beams.

If cut at 45º, the saw blade can penetrate the material up to 48mm; and if it is located at 90º, the depth of the cut can reach 65 mm

With the 190 mm Ø carbide saw blade, it includes basic accessories such as a suction adapter, a hexagonal wrench, a parallel stop.

Its cutting power and cleanliness comes in handy for demanding jobs. Without a doubt, it is an optimal tool for woodworking at home.

2. Bosch PTS 10 Table Circular Saw with Bottom Frame

Table saw model, has a solid aluminum base or lower frame, 77 cm deep and 60 cm wide, which gives it solidity, stability and precision; which also guarantees you a cutting height of 75 mm

It comes with 2 extensions: a lateral one and a rear one with a stop parallel to the additional cutting blade, to saw larger pieces in an easy and comfortable way.

The parallel stop is self-adjusting, which guarantees a more exact cut. It includes an integrated sliding carriage with an angle stop for miter cuts up to 60º.

The saw blade can be adjusted up to 75mm in height, when positioned at 45º.

It is powered by a 1400V high-power motor, allowing you to operate the saw and connect a vacuum cleaner to clean the work area at all times.

Easy to assemble, use and disassemble, since the parts can be handled with great ease, and are stored in the machine itself.

3. Kawasaki incision saw 603010360

It has a 1200 W and 240 V motor. The speed of the cutting blade can be adjusted to cut on different materials ; being for lighter materials, a rotation speed of 2000 rpm, and for solid and somewhat heavier parts, 6000 rpm.

It allows a great depth of cut, being able to reach 50 mm at 90º, and 38 mm at 45º.

It weighs 9 kilos and its dimensions of 36, 4 x 32 x 27 cm, make it easy to place it on any surface.

4. Bosch GCM 8 SJL circular saw

The Bosch GCM 8 SJL circular saw is a model for professional use.

It includes a soft start system, which favors starting the cut from scratch to allow that the cutting blade is not aligned with the exact point of cut on the workpiece, it can stop to reposition itself.

It has a power of 1600 W , incorporates 2 points of aspiration of chips and dust along the cutting line. In addition, thanks to its rotation speed of 5500 rpm, it can cut up to a maximum cutting width of 312 mm.

It has the feature of Position Indicator, which allows you to know the degree of inclination to which it is. Its “D” shape allows you to adjust the blade at 52 and 60º.

In addition to its power of 1600 V, it has an amperage of 6.6 A; and a noise level of 112 dB, something that is appreciated in a cutting machine for construction work.

It is a complete circular saw; perfect for advanced DIY and perfect miters.