Introduction
Nextorch sent this torch to me in exchange for an honest review. They were quite clear that they wanted honest feedback and a positive review was not a requirement.
Nextorch is not a brand that comes up often on the fora or Reddit, looking at their website they sell a range of batons and training aids in addition to torches so it appears that a large part of their market is law enforcement.
Pricing and availability
You can order from Nextorch's website here At the time of writing (16/11/2026) it is $139.99.
What comes in the box?
The torch comes in a nice retail box containing the following:
TA300D Max tactical torch
21700 battery (inside the torch)
Tactical ring accessory (fitted)
Pocket clip
Branded lanyard
40 cm USB A to tye C cable (with green inserts!)
Instruction manual
Design and build quality
First impressions are excellent. Fit and finish is up there with the best, the anodisation is satin black and the whole thing feels very solid. All edges are nicely smoothed off and there are no angles that would snag on anything. I imagine it would draw nicely from a holster, but you don't get one. Nextorch do offer a nice-looking moulded plastic holster but it's a separate purchase item. Olight do include a nylon holster with their tactical lights so it would have been nice to see one here.
The torch is rated for an impressive 3 m for drop, and IP68 for a stated 3 m submersion for 30 minutes. It also comes with a ten-year warranty.
The (unknown) LED sits deep inside a lightly orange peel reflector and is surrounded by a presumably steel bezel containing three ceramic beads in case you should need to break a window. The bezel is lightly crenulated but it not aggressive and does not feel unpleasantly spiky.
The pocket clip is initially friction-fit, but is captured by the tail-cap. It is also keyed into the body of the light so once it's fitted it is *very* secure. The clip is where the lanyard attaches should you want to use it.
The tactical ring feels sturdy and provides additional grip, this is easily removable when you unscrew the tail cap if you don't want to use it.
Size and comparisons
Left to right: Acebeam L35, Nextorch TA30D Max, Acebeam P16, Olight Warrior M2R. (Can of cola for scale!)
Weight and dimensions:
Weight with battery 249 g
Overall length 152 mm
Bezel diameter 37 mm
Body diameter 21.5 mm
Batteries and charging
Nextorch include a 4800 mAh branded 21700 battery. The battery is a protected button top with an integrated USB-C port for charging. There is a little red light on the battery when it's charging, this turns blue when it's full. The battery arrived at 3.6v which is ideal for long-term storage. Using the included port the battery charged at 5 volts, 1.6 amps. The battery goes into the light negative end towards the head. This is probably to do with all the controls being at the tail but it is something to be aware of as it's the opposite way around to most other torches. There is a printed label on the torch to remind you though. The battery is standard but despite springs at both ends unprotected flat-top batteries are too short to work. I found that a PCB spacer like the ones Convoy sells worked a treat with a Molicel flat-top except when the pocket clip was fitted. I guess this is because the tail-cap doesn't thread on quite far enough with the clip fitted. The protected button-top that came with my Acebeam E75 worked perfectly. As far as I have been able to research I do not think that the driver has low-voltage protection so a protected battery is the way to go.
Nextorch sell the batteries on their website and they're reasonably priced.
The threads are not anodised so mechanical lockout is not possible by loosening the tail-cap. This should not be a problem though because of the lockout position for the selector ring.
UI and switches
The UI is unlike anything else I've used, but it is simple and intuitive... in the main. The tail end of the torch is where it all happens, there is a selector ring surrounding a proud tail-switch. The ring is metal and has very definite detents so it moves smoothly but positively.
The ring around the switch illuminates briefly when the ring is moved to the Tac or Lock position to indicate battery status.
Blue = 75% - 100%
Flashing Blue = 50% - 75%
Red = 25% - 50%
Flashing red = 0% - 25%
Moving counter clockwise the ring positions are TAC, LOCK, I, II, III
Stated levels and run times:
Low - 70 lumens for 40 hours
Medium - 550 lumens for 5 hours
High - 4000 lumens for 2 hours 45 minutes*
*This is not true. You get 4000 lumens for a couple of minutes before it settles down to around 1000 for the remaining run-time. This is normal, but some other manufacturers are clearer in their stated specs and mention the step-down and the sustained level. Thermal performance is good, the light gets warm on the highest setting but not uncomfortably so.
The tail-switch doesn't necessarily do what you expect it's going to, but I actually like this UI. Note that for this torch high means the same as turbo.
TAC - The light is off. Half press on the tail gives you momentary high, full press is momentary strobe.
LOCK - Light is locked (funnily enough!). Pressing the tail switch does nothing. The ring locates very securely, I can't think that the torch could unlock in transit.
I, II and III correspond to low, medium and high. The torch turns on at that level when the ring is turned to that position, the tail switch then works like it does in TAC mode.
Intuitively you think that the tail switch is going to be used for on / off, but that's not the case. While it is a bit individual I like it because I know exactly what's going to happen when I move the ring to switch the torch on. I dislike mode memory for one simple reason, the torch might remember what mode I turned it off in, but I probably won't. With this system "TAC" is always going to give you momentary high and strobe and "I" is always going to give you low. I like this predictability.
LED and beamshots
I don't know what the LED is and Nextorch aren't saying. Whatever it is it's low CRI and cool white. This is a tactical torch however so I'm not going to complain. The tint is pretty neutral though.
White wall at 2 m. There is a large hotspot with plenty of spill. Cool white but not noticeably green.
The bridge you can just see in the distance is 90 metres away. There is some shadow from the bezel but it's not noticable in use. This is on the highest mode.
The beam is a nice combination of throw and spill, you can see around you well and what's going on over there. Even at the lower levels it punches far enough to be useful.
Conclusion
I really like this torch. The build quality, fit and finish are all high quality and the selector ring is very satisying to use. I would have liked to have seen an included holster like you get with some of the competition, but given that Nextorch seems to be mainly targeting professional users perhaps it's not worth it because most departments buy the plastic quick-draw holster which, to be fair, is what I would want to use if I was carrying it on a duty belt or vest.
There are some things I would like to change, I'd prefer low-voltage protection via the driver instead of depending on the battery, and I would like the option to use the flat-top batteries I already have, but that's me thinking like an enthusiast and not a professional who's using it as a tool. Building the protection into the battery makes it harder to get things wrong, and therefore safer. As I mentioned above, Nextorch sells batteries at a fair price and you can use ones from Acebeam for example.
This is a very solid tactical light that should serve you well.
Thank you to Nextorch for sending it to me to review. :)