Q: How do I use it?
A: Open the checkra1n app, and follow the instructions to put your device into DFU mode. Hax happens auto-magically from that point and the device will boot into jailbroken mode. If you reboot the device without checkra1n, it will revert to stock iOS, and you will not be able to use any 3rd party software installed until you enter DFU and checkra1n the device again.
Q: Is it safe to jailbreak? Can it harm my device / wipe my data?
A: We believe jailbreaking is safe and take precautions to avoid data loss. However, as with any software, bugs can happen and *no warranty is provided*. We do recommend you backup your device before running checkra1n.
Checkra1n Driver Download
Download File 🔥 https://blltly.com/2y3CZ7 🔥
Q: I have a problem or issue to report after jailbreaking.
A: Many problems and bootloops can be caused by buggy or incompatible tweaks. Remember many tweaks never saw iOS 13 in the pre-checkra1n era. If you suspect a recently installed tweak, you may attempt to enter no-substrate mode by holding vol-up during boot (starting with Apple logo until boot completes). If the issue goes away, a bad tweak is very likely the culprit, and you should contact the tweak developers.
Q: Where are the sources? I want to write a dark-mode theme and publish the jailbreak as my own.
A: checkra1n is released in binary form only at this stage. We plan to open-source later in 2020. We will release the full checkra1n source once we have a Windows GUI version. We had hoped to get there in 2020, but we didn't manage to. But PongoOS, the kernel patchfinder and the SEP exploit are already open source on GitHub.
The iRemovalRa1n Pro jailbreak is essentially a copy of the checkra1n jailbreak ported over to run natively on Windows. Compared to checkra1n for macOS and Linux, this tool was not developed by the CheckRa1n team.
Normally, the checkra1n team announced a Windows port of checkra1n a while ago, but it looks like they got stuck on the drivers aspect of checkra1n on Windows a few years ago and never completed the project. To this date, iRemovalRa1n is the only checkra1n clone to work on Windows natively without having to boot a Linux environment.
iRemovalRa1n Pro runs like a normal Windows program and can detect the device and jailbreak it directly from Windows, no need to reboot to Linux or a different OS (like checkn1x used to do). The interface of iRemovalRa1n is basically a clone of checkra1n with just some text changed, so if you know how to use checkra1n on Linux or macOS, the same applies to iRemovalRa1n.
Since this is a checkra1n jailbreak port/clone, it supports the same devices that checkra1n supports. Basically, iPhone X and older are all supported, while newer devices are not supported. Here are some of the supported devices:
Devices like iPhone 13 Mini, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 12, iPhone 12 Pro, iPhone 12 Mini, iPhone 12 Pro Max iPhone 11 Pro, iPhone 11, iPhone 11 Pro Max, iPhone XR, iPhone XS Max, and iPhone XS are all unsupported by both checkra1n and iRemovalRa1n Pro.
checkra1n for Windows is finally here created by the developer behind the iRemoval PRO app and released under iRemovalRa1n name. So far the only option to jailbreak your iPhone with checkra1n on Windows was to use a Linux distribution. Today it changes.
iRemovalRa1n (iRa1n) is basically the checkra1n for Windows released inside iRemoval PRO 5 app. Siguza and many other checkra1n developers are aware of this project and have given permission to release it under a different name. iRemovalRa1n works with iOS 12.0 to iOS 14.8.1.
This Windows port of checkra1n and checkm8 exploit allows you to jailbreak iPhone 5s through iPhone X running on iOS 12 up to iOS 14. When checkra1n developers will make it possible to jailbreak iOS 15, iRemovalRa1n will also add support for the latest firmware.
checkra1n for Windows was never officially released due to a lack of proper kernel driver. iRemovalRa1n is a brand new jailbreak for Windows taking the advantage of the same methods to exploit iOS firmware via USB port by installing UsbDK Runtime Libraries.
iRemovalRa1n cloned the look of the original checkra1n application for macOS and Linux. Therefore, if you are familiar with the interface of checkra1n you will immediately know what to expect and how to jailbreak iOS on Windows. The heart of this jailbreak is checkm8 exploit.
The exploit was released as an open-source project, and now it's also the engine behind iRemovalRa1n created for Windows. To install Cydia on your device with checkra1n for Windows it's required to connect your iPhone, iPad, or Apple TV via a USB cable (USB-A) to proceed.
checkn1x was so far the only workaround to jailbreak iOS devices using checkra1n on a Windows PC. This Linux system (Light image, about 29 MB) could run from a USB drive, allowing you to jailbreak the iPhone from a PC. iRemovalRa1n runs as a native application for Windows.
iRemovalRa1n (checkra1n for Windows) exactly as the original jailbreak tool requires you to connect your device with a USB-A cable to the computer and enter DFU mode. If your device and iOS version are supported, you are ready to jailbreak and install Cydia.
About a month ago some people tried using WSL 2 to run checkra1n, but nobody was successful. Reddit user u/WillyJL made a post detailing the process he went through. The method in this post might work a bit better, but no guarantees. Don't try this unless you fully understand each step as it involves messing around with drivers. Run all the Windows commands in an Administrator command prompt.
Connect your device and place it in DFU mode. Make sure you use a USB port on your motherboard, not a case port or a port on a USB Hub. Using Zadig, install the libusbK driver for your iDevice in DFU mode. (This will replace the Apple drivers).
Yet, checkra1n has not work out a version that can work on Windows OS which resulting in that one of the basic routes for Windows user to jailbreak their iPhone using checkra1n on Windows PC is to create a jailbreak USB flash drive. And boot the computer from jailbreak USB flash drive and get to jailbreaking process.
The drivers provided on this page are for CHECKRA1N 0, and most of them are for Windows operating system. Before downloading the driver, please confirm the version number of the operating system installed on the computer where the driver will be installed. If the system version number does not meet the driver requirements, it may cause some unexpected problems. In the case of determining the operating system version number, it is recommended to download the 5-star driver first.
In addition, as long as your downloaded driver version can make the system work normally and stably, you don't have to excessively pursue the latest version of the driver. This is because the new version of the driver is to solve some BUGs in extreme cases, or to improve a little bit of hardware performance, but it may also bring some new unpredictable problems.
Many hardware names are usually named after the chip model, and each chip model has its own dedicated driver, so as long as you know the chip model used by the hardware, you can find the right driver. For example, if your graphics card is named: "AMD Radeon RX 580", while actually the core chip model used is: "Radeon RX 580", then enter "Radeon RX 580" or "RX 580" to find the driver.
If you have a laptop or an all-in-one PC, you can also use the product name to search, and then go to the download page which has all the drivers for this machine (including: graphics card, network card, sound card, etc.). For example, if your laptop product name is: "Dell A6-9220e Inspiron Flagship", then type "Dell A6-9220e" to find all the drivers for this laptop.
Also, check that the checkra1n jailbreak supports your device and the iOS firmware. For that, go to settings, general, about; here, you can see both the iOS version and the model number. As you can see, I am on iOS 14.8 on the iPhone 7 GSM.
Before you click on the jailbreak button, this is a new checkra1n windows tool, and you might find bugs in it while installing checkra1n jailbreak with the iremovalra1n tool.
But there is another way of setting a passcode. I already have published a tutorial on that; here is how to set the passcode on checkra1n jailbreak iPhone. This is how checkra1n works for iPhone 8 and above devices.
Q: When is Windows support coming?
A: We need to write a kernel driver to support Windows (which is a very complex piece of code!) which will take time. Rest assured however, we are working hard on it.
(Source)
Code 31 on the motherboard typically refers to a specific error code encountered by hardware devices in Windows operating systems. This error signifies that Windows was unable to load the required driver for a particular hardware device correctly. It often appears in Device Manager as a "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)" message.
Error code 31 in Windows Device Manager is typically caused by driver-related issues. If the driver for a hardware device is outdated or incompatible with your Windows version, it can trigger a Code 31 error. Problems within the Windows registry, such as missing or invalid registry entries related to the device, can cause Code 31 errors.
Ever since late September and the release of the checkm8 BootROM exploit by axi0mX, the iOS jailbreak community had been anxiously waiting for a jailbreak to drop using the unpatchable exploit. Finally, the wait is over and the checkra1n jailbreak has officially been released after missing its ETA by less than 2 days!
Having trouble installing the checkra1n jailbreak? If you do it right, you achieve a nearly 100% success rate. We have collected the most important information on how to install and troubleshoot the checkra1n jailbreak. By following these advises, you will be able to jailbreak like a pro, whether you just want to research your own device or perform the file system and keychain acquisition. 2351a5e196