I accidentally deleted my Firebase project. As it turned out this project was linked with Google Cloud project which was responsible for OAuth 2.0 credentials and prompt screen information. Later I restored the Firebase project, the Google Cloud project and the OAuth 2.0 credentials. But my Sign in with Google still not working, it gives me "Access blocked: Authorization Error. The OAuth client was deleted. Error 401: deleted_client" error. I thought that Google needs some time to detect all the restored things, but a day already passed since restoration and I'm still getting same error.
Do I need to perform some additional actions after restoration to make it work or wait more time? Or restored credentials are not valid anymore and I should generate new ones?
I'll get back to this after i fix the current one.
There are some posts that suggest making a bootable USB using a healty SRX and booting from that. I reformated my 16GB USB disk to FAT32 and plugged into a healty SRX300 and used the following command: "run request system snapshot media usb"
When it finished after a while i plugged it into the faulty one and rebooted:
's Boot DVD 15.2 Restored Edition V2.0
Download File 🔥 https://shurll.com/2yg6kJ 🔥
After every attempt I rebooted my machine and, when selecting an EFI boot menu entry, expected to see GRUB with menu entries that could let me boot RL (or the ones that should load with blscfg from /boot/loader/entries), but none of these worked for me.
Yes but as far as I know even with disabled secure boot it should simply redirect control to grubx64.efi and I was just trying to see if at least something could work lol.
Also mentioning secure boot, I tried using the grub2-install utility but it completely refuses doing anything with EFI platforms because of secure boot.
Now there have been projects on the Internet that have restored all the censored scenes back into Fantasia. But all those releases use the DVD or blu ray release as the basis. Meaning there has yet to be a fully authentic version of Fantasia that is available, officially or otherwise. That is up until February 2021!
The SD card for my Raspberry Pi 4B became un-bootable after having been wellcustomized and with lots of important files and with programs compiled fromsource, etc. It does not fully boot, but does take me to a command-lineinterface. From there I can type 'help', but the commands listed there arelike 'cd/break/pwd/echo/set', etc. If I do an 'exit' from there, I am pretty wellstuck - inoperable.
Is it possible to use restore bootability to the SD card by re-imaging justthe boot partition, perhaps with the 'dd' command? and to what extent wouldI lose customizations by modifying only the boot partition?
The message has nothing to do with TPM. It simply means loaded core.img does not match grub modules under /boot/grub2. As in OP case it should have used pre-built EFI image, the only explanation I have - either it failed back to generated grub image and it is old or it failed back to legacy BIOS boot and installed core.img is again too old.
I heard someone calling the USB "lost", "broken" due to this "Read-Only mode" but I cannot see how the process of making OS bootable USB can destroy a pendrive, even on a Mac (I won't commit the same error again).Anyone has an idea?
After booting procedure all leds gone off, except the power led.
The wap03 is not reachable overt the network interface using ssh or https.
I must mention, that the third router wap03 is working fine
using the TP-Link firmware.
If all three are really the same models (i dont know the difference between v2.0 and v2.1), i have cloned many of them and never ran into a problem; but my models are really all identical, all bought in 2015 and they all state "Model: Archer C7 Ver 2.0" on the label.
After cloning, remove
/lib/firmware/ath10k/cal-pci-0000:01:00.0.bin
/lib/firmware/ath10k/QCA988X/hw2.0/board.bin
(will be rewritten after the next reboot)
...otherwise the Wifi MAC address of the cloned router is not its own but the one of the clone source, this is only a real problem if you run multiple routers at the same place.
After reviewing the config files, i adjusted the config/network,
because the configuration of wap01 was to complex, with many trunk
ports and no local management port. After enabling a local management
port and rebooting the router the problem was still not solved.
I am working on creating a Ghost image of Windows 10. I am using stand alone version of norton ghost 3.3 which is the latest one from norton. Along with WINPE10. My PC is configured to boot in UEFI only mode.. I am creating image in following way: in winpe mode -->disk --> to image --> source is O.S drive --> destination --> Usb --> create Image restoration is done in following way --> winpe mode --> disk --> from image --> src=usb --> DST=drive 1. Image gets restored successfully. When I boot the target machine I get a blue screen error saying "your PC needs to be repaired". I am not sure what is wrong in this procedure. Also both the source and target machine are identical machine.. I am stuck at this phase. Could someone please help me to resolve this..
Also are both systems set as UEFI boot only. I know you said that is was but I just want to make sure of 4 things. It is so common to have one of the following not be set as uefi and then failures arise.
It seems like the 2.4.11 snap is running with Mongodb 3.6.14, but the 2.4.12 snap installed MongoDb 3.4.20? To resolve the issue, I was forced to restore an old VM image of the server, disable network lookups of api.snapcraft.io (to prevent it from refreshing when the vm boots), and then restore the database from backup.
I have an older Fujitsu Workstation (~2015) with a SSD and a larger harddrive.Originally it had Windows 7 installed on the SSD with the hdd as data drive.A few month ago I created a second Partition on the harddrive and installed ubuntu and centOS a few times.Somewhere I messed up, and Windows can't boot anymore.When I try booting from the SSD I get to a Grub Rescue shell.I tried the windows 7 automatic repair, wich 'succeded' with no effect. Then I tried in the rescue consolebootrec /fixmbr, which did 'succed' but had no effect either.bootrex /fixboot gives 'element not fond', but bootrec /ScanOs does find the windows Installation. 589ccfa754
Resolume Arena 4.2.1 Crack Windows
Mp3 Songs Free Download For Mac