What is SP-Flashtool?
SP-Flashtool, short for Smartphone Flash Tool, is a computer application designed specifically for flashing firmware, custom ROMs, and recovery images onto Android smartphones and tablets that use MediaTek (MTK) chipsets. The tool is designed for devices with MediaTek chipsets and is incompatible with other chipsets like Qualcomm or Exynos.
How to Download Wiko Lenny Stock ROM?
To download the official Wiko Lenny stock ROM, you can use the links below. There are two versions of the stock ROM available: V14 and V20. Both versions are based on Android 4.2.2 Jelly Bean. You can choose the version that matches your device's current firmware or the latest version available.
Wiko_Lenny_V14_MT6572.zip (503 MB)
Wiko_Lenny_V20_MT6572.zip (498 MB)
After downloading the stock ROM file, you will need to extract it using a file extractor tool like WinRAR or 7-Zip. You will get a folder containing the scatter file and the firmware files.
How to Install Wiko Lenny Stock ROM using SP-Flashtool?
To install the Wiko Lenny stock ROM using SP-Flashtool, you will need to follow these steps:
Download and install the MediaTek driver on your computer. This driver will help your computer recognize your device when connected via USB cable.
Download and unzip the SP-Flashtool package from here. You will get a folder containing the SP-Flashtool.exe file and other files.
Run the SP-Flashtool.exe file as administrator. This will launch the SP-Flashtool application on your computer.
Click on the Scatter-loading button and browse to the folder where you extracted the Wiko Lenny stock ROM. Select the MT6572_Android_scatter.txt file and click Open.
The SP-Flashtool will load the scatter file and display all the firmware files in a list. Make sure all the boxes are checked except for Preloader.
Click on the Download button at the top of the SP-Flashtool window. This will start the flashing process.
Turn off your Wiko Lenny device and remove the battery if possible. Then connect it to your computer via USB cable while holding the Volume Down button.
The SP-Flashtool will detect your device and begin flashing the firmware files. You will see a red bar followed by a yellow bar at the bottom of the window.
Wait until you see a green circle with a check mark at the center of the window. This means that the flashing process is completed successfully.
Disconnect your device from your computer and reinsert the battery if removed. Then turn on your device and wait for it to boot up.
Congratulations! You have successfully installed the official Wiko Lenny stock ROM using SP-Flashtool. You can now enjoy the original firmware on your device.
Conclusion
In this article, we have shown you how to download and install the official Wiko Lenny stock ROM using SP-Flashtool. This method can help you fix software issues, unbrick your device, or upgrade to a newer version of Android. However, you should be careful when flashing firmware on your device, as it may void your warranty or cause data loss. Always backup your data before flashing and follow the instructions carefully. If you have any questions or problems, feel free to leave a comment below.
References:
: SP Flash Tool - Download Smart Phone Flash Tool
: Wiko_Lenny_V14_MT6572.zip
: Wiko_Lenny_V20_MT6572.zip
: MediaTek Driver
: SP-Flashtool v5.2216 for Windows
: MT6572_Android_scatter.txt
524038ac18