Academic Qualifications

• 2001:Doctor of Philosophy (Mechanical Engineering), National Cheng Kung University

• 1998:Master of Engineering(Mechanical Engineering ), National Cheng Kung University

• 1996:Bachelor of Engineering(Mechanical Engineering ), National Cheng Kung University 

Employment History

Present Appointment

• Aug. 2023  Professor, Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-sen University(NSYSU)

Previous Appointments

1. ACADEMIC 

• 2021~2024, selected as the "World's Top 2% Scientists", including the top 2% of "Academic Career Scientific Impact" and the top 2% of "Science Impact" Top scientist.

• 2024 Outstanding Professor Award by Chinese Society of Mechanical Engineering 

• Aug.  2021 – Jul. 2023  Distinguished Professor, Graduate Institute of Precision Manufacturing and Department of Intelligent Automation Engineering, National Chin-Yi University of Technology(NCUT)

• Feb. 2020 – Jul. 2020  Professor, Department of Intelligent Robotics , National Pingtung University (NPTU)

• Feb.  2017 – Jan. 2020  Distinguished Professor, Graduate Institute of Precision Manufacturing, National Chin-Yi University of Technology(NCUT)

• Aug. 2013 – Jan. 2020  Professor, Graduate Institute of Precision Manufacturing, NCUT

• Feb.  2011 – Dec. 2013 Distinguished Professor, Department of Mechanical Engineering, Far East University(FEU)

• Aug. 2009 – Jan. 2013 Professor, Department of Mechanical Engineering, FEU

• Aug. 2006 – Jan. 2009 Associated Professor, Department of Mechanical Engineering, FEU

• Aug. 2003 – Jan. 2006 Assistant Professor, Department of Mechanical Engineering, FEU

2. ADMINISTRATIVE 

• Aug. 2022 – Jul. 2023  Dean, Dean of Dept. Intelligent Automation Engineering, NCUT

• Feb. 2021 – Jul. 2022   Vice Dean, Office of International Affairs, NCUT

• Aug. 2018 – Jan. 2020   Dean, Graduate Institute of Precision Manufacturing, NCUT

• Feb.  2017 – Jul.  2017  Director, Office of Research and Development, NCUT

• Aug. 2013 – Feb. 2017  Dean, Office of Paradigm Technological University Project, NCUT

• Feb. 2009 ~ July. 2013 Chief, Office of Industrial Academic Cooperation (OIAC), FEU 

• Jan. 2006 ~ July. 2013 Chief, Creative Food & Beverage Research Center, FEU

• Aug. 2006 ~ Jan. 2009 Dean, Center of Technology Cooperation, FEU

Other Appointment(Concurrent)

• Editor in Chief of Smart Science (ESCI journal).

• Editor of Journal of the Chinese Society of Mechanical Engineers (SCI journal).

• Editor of American Journal of Materials Science and Technology(International journal)

• Editor of Circus and System(International journal)

• Session Chairman of the 2nd International Conference on Engineering and Technology Innovation 2012.

• Session Chairman of IEEE International Conference on Mechatronics and Automation 2012.

• Session Chairman of 2012 International Symposium on Computer, Consumer and Control.

• Session Chairman of the First International Conference on Engineering and Technology Innovation 2011.

• Organizing Committee of 2nd IEEE International Symposium on Knowledge Acquisition and Modeling, 29th~30th November 2009, Wuhan, China

• Organizing Committee of 2009 ICMS International Conference on Mechatronics System of Integration and Application, 4th~5th December 2009, Tainan, Taiwan

• Session Chairman of 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Session 1C3 Nano Materials, 5th~8th January 2009, Shenzhen, China

• Session Chairman and Reviewer of the 26th National Conference on Mechanical Engineering, Session E, 20th~21st November 2009, National Cheng Kung University, Taiwan

• Session Chairman and Reviewer of the 25th National Conference on Mechanical Engineering, Session E, 21st~22nd November 2008, Da-Yeh University, Taiwan

• Examiners Committee of Graduate Institute of Aeronautical Engineering, National Formosa University, Taiwan, 2009

• Referee of Journal: Tribology International

• Referee of Journal: Nonlinear Dynamics

• Referee of Journal: Mechanical Systems and Signal Processing

• Referee of Journal: Nonlinear Analysis—Theory, Methods & Applications

• Referee: Proceedings of the IEEE International Conference on Nano/Micro Engineered and Molecular Systems, ASME International Conference on Micro- and Nano-Systems, 2009 4th Intelligent Living Technology Conference, etc.

Awards, Distinctions and Recognition 

• Outstanding Teaching Award in FEU, 2008.

• Outstanding Research Award in NCUT, 2013 to 2023

• NSTC Special Outstanding Talent Award, 2010 to 2012, 2015, 2017-2024.

• Obtain 11 Gold medals, 16 Silver medals, 5 bronze medals, and 4 Special awards from International Exhibition of Inventions including USA, Geneva and Nuremberg etc. (2006 to 2013) The detail is listed as following:

1. Rapid Expansion and Separation of Supercritical Solutions Method

The 63rd2011 IENA Nurnberg in Germany-Gold Medal

2. Instrument of Liquid Concentration

The British Innovation & Technology Exhibition (BIS 2009)-Silver Medal & Special Prize

3. A New Healthy Coffee Maker

The 37th Geneva International Inventions-Silver Medal

2009 Taipei International Invention Exhibition-Bronze Medal

4. The Optical Alcohol Gauge

The 20th 2009 International Invention, Innovation & Technology Exhibition in Malaysia-Bronze Medal & Special Prize

5. Flexural Strength Analyzer of Golf Club

2008 Taipei International Invention Exhibition-Bronze Medal

6. Electrical Dynamic Swing Measurement of Golf Club

The 24th 2008 INPEX in Pittsburgh, PA USA-Gold Medal

Korea Invention Society-Honor Special Prize

7. A New Coffee Machine with the Function of Adjustable Caffeine Quantity

The 24th 2008 INPEX in Pittsburgh, PA USA-Gold Medal

The 60th 2008 IENA Nurnberg in Germany-Silver Medal

8. Adjusted Angle Machine of Golf Club

The 35th 2007 Geneva International Inventions-Silver Medal

9. Flexural Strength Analyzer of Golf Club

The British Innovation & Technology Exhibition (BIS 2007)-Gold Medal and Special Prize

10. Portable Frequency Analyzer of Golf Club

The 58th 2006 IENA Nurnberg in Germany-Gold Medal

LICENSES 

• The 2nd degree certificate of Council of Labor Affairs, ‘Computer Numerical Control of Milling Machine’, effective from Sep. 1st, 2004

• The 2nd degree certificate of Council of Labor Affairs, ‘Application of Computer Software’, effective from Aug. 20th, 2005

• The 2nd degree certificate of Council of Labor Affairs, ‘Repair of Computer Hardware’, effective from Jan. 31st, 2007

• Certificate of information specialist of Ministry of Economic Affairs, ‘Linux Administration IT Expert’, effective from Nov. 7th, 2008

Research Paper

(A)Journal Paper ：（*corresponding author）

[A1]        Aniket Mishra, Her-Terng Yau, Ping-Huan Kuo, *Cheng-Chi Wang, 2024/11, Achieving sustainability by identifying the influences of cutting parameters on the carbon emissions of a milling process, International Journal of Advanced Manufacturing Technology, Accepted for publication (SCIE, Impact Factor: 2.9 (Q2); 36/84, Automation & Control Systems; 29/68, Engineering, Manufacturing) [ISSN: 1433-3015] (NSTC-112-2221-E-110-073-MY2 and NSTC-112-2622-E-110-014)

[A2]        *Cheng-Chi Wang, Ping-Huan Kuo, Ta-Jen Peng, Masahide Oshima, Suzanna Cuypers, Yu-Tsun Chen, 2024/6, Voting Model Prediction of Nonlinear Behavior for Double Circumferential-Slot Air Bearing System, Chaos Solitons & Fractals, Vol. 183, 114908. (SCIE, Impact Factor: 5.3 (Q1); 2/60, Physics, Mathematical; 7/135, Mathematics, Interdisciplinary Applications; 18/112, Physics, Multidisciplinary) [ISSN: 0960-0779]. (NSTC-112-2221-E-110-073-MY2 and NSTC-112-2622-E-110-014)

[A3]        Ta-Jen Peng, Ping-Huan Kuo, Wei-Cheng Huang, *Cheng-Chi Wang, 2024/3, Nonlinear Dynamic Analysis and Forecasting of Symmetric Aerostatic Cavities Bearing Systems, International Journal of Bifurcation and Chaos, Vol. 34, No. 04, 2430008. (https://doi.org/10.1142/S0218127424300088) (SCIE, Impact Factor: 1.9 (Q2); 47/135, Mathematics, Interdisciplinary Applications; 57/134, Multidisciplinary Sciences) [ISSN: 0218-1274] (NSTC-112-2221-E-110-073-MY2 and NSTC-112-2622-E-110-014)

[A4]        Jiˇrí Ryšavý, Wei-Mon Yan, Thangavel Sangeetha, Jenn-Kun Kuo, Cheng-Chi Wang, František Hopan, Maria Gouveia, Carla Oliveira Henriques, Lenka Kubonová, Tadeáš Ochodek, 2024/7, The Bacharach Method: A Low-Cost Tool for Small-Scale Combustion Units’ Flue Gas Quality Control, Fire, Vol. 34, No. 04, 2430008. (https://doi.org/10.3390/fire7070232) (SCIE, Impact Factor: 3.0 (Q1); 11/89, Forestry; 60/197, Ecology) [ISSN: 2571-6255]

[A5]        *Cheng-Chi Wang, Po-Jui Huang, Jiří Ryšavý, Jakub Čespiva, 2024/11, Optimization Analysis of Continuous Supercritical Extraction System for Ganoderma Llucidum, Sensors and Materials, Accepted for publication (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935] (NSTC-112-2221-E-110-073-MY2 and NSTC-112-2622-E-110-014)

[A6]        Tsung-Chia Chen, Shi-Xun Chen, *Cheng-Chi Wang, Tsui-Er Lee, 2023/3, Analysis of the Punch Motion Curve for the Springback of U-Shaped Sheet Metal, Advances in Mechanical Engineering, Vol. 15(3) 1–15. (https://doi.org/10.1177/16878132231161151) (SCIE, Impact Factor: 1.9 (Q2); 39/78, Thermodynamics; 92/183, Engineering, Mechanical) [ISSN: 1687-8132]

[A7]        Chih-Jer Lin, Hsing-Cheng Wang, *Cheng-Chi Wang, 2023/3, Automatic Calibration of Tool Center Point for Six Degree of Freedom Robot, Actuators, Vol. 12(3), 107.(https://doi.org/10.3390/act12030107). (SCI, Impact Factor : 2.2 (Q2); 76/183, Engineering, Mechanical; 34/76, Instruments & instrumentation) [ISSN: 2076-0825].

[A8]        *Cheng-Chi Wang, Chih-Jer Lin, 2023/1, Dynamic Analysis and Machine Learning Prediction of a Nonuniform Slot Air Bearing System, ASME Journal of Computational and Nonlinear Dynamics, Vol. 18(1), 011007 (9 pages).(https://doi.org/10.1115/1.4056227). (SCI, Impact Factor : 1.9 (Q3); 92/183, Engineering, Mechanical; 96/170, Mechanics) [ISSN: 1555-1423]. (MOST-110-2221-E-167-019 and MOST-111-2622-E-167-006)

[A9]        *Cheng-Chi Wang, Ping-Huan Kuo, Guan-Ying Chen, 2022/8, Machine Learning Prediction of Turning Precision Using Optimized XGBoost Model, Applied Sciences-Basel, Vol. 12(15), pp.7739-7750. (https://doi.org/10.3390/app12157739). (SCI, Impact Factor : 2.5 (Q1); 44/181, Engineering, Multidisciplinary; 87/179, Physics, Applied) [ISSN: 2076-3417]. (MOST-110-2221-E-167-019)

[A10]     Tsung-Chia Chen, Shi-Xun Chen, Cheng-Chi Wang*, 2022/8, Punch Motion Curve in the Extrusion–Drawing Process to Obtain Circular Cups, Machines, Vol. 10(8), pp.638–654.( https://doi.org/10.3390/machines10080638) (SCIE, Impact Factor: 2.1 (Q2); 193/353, Engineering, Electrical & Electronic; 83/183, Engineering, Mechanical) [ISSN: 2075-1702] (MOST-110-2221-E-167-019 and MOST-111-2622-E-167-006)

[A11]     Tsung-Chia Chen, Ching-Min Hsu, Cheng-Chi Wang*, Tsui-Er Lee, 2022/11, Analysis of Deep Drawing Process for Micro Square Holes on Copper Sheets, Sensors and Materials, Vol. 33(11), pp. 3949-3955. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935] https://doi.org/10.18494/SAM.2021.3721 (MOST-110-2221-E-167-019 and MOST-111-2622-E-167-006)

[A12]     Cheng-Chi Wang*, Yong-Quan Zhu, 2021/8, Identification and Machine Learning Prediction of Nonlinear Behavior in a Robotic Arm System, Symmetry-Basel, Vol. 13(8), pp.1445–1471. (SCIE, Impact Factor: 2.2 (Q2); 50/134, Multidisciplinary Sciences) [ISSN: 2073-8994] (MOST- 108-2221-E-167 -028 and 108-2622-E-167 -026 -CC3)

[A13]     Tsung-Chia Chen, Ching-Min Hsu, Cheng-Chi Wang*, 2021/9, The Deep Drawing of a Flanged Square Hole in Thin Stainless Steel Sheet, Metals, Vol. 11(9), pp.1436–1456. (SCIE, Impact Factor: 2.6 (Q2); 25/90, Metallurgy & Metallurgical Engineering) [ISSN: 2075-4701] (MOST- 109-2221-E-167-007, 110-2221-E-167-019, 110-2622-E-167-008)

[A14]     Tsung-Chia Chen, Jyun-Jie Lian, Cheng-Chi Wang*, 2021/8, Analysis of Micro-Machining Process for External Thread of Micro Round Tube, Materials, Vol. 14(15), pp.4327–4345. (SCIE, Impact Factor: 3.1 (Q1); 20/90, Metallurgy & Metallurgical Engineering) [ISSN: 1996-1944] (MOST- 108-2221-E-167 -028 and 108-2622-E-167 -026 -CC3)

[A15]     Cheng-Chi Wang*, Cai-Wan Chang-Jian, and Ping-Hung Wang, 2021/11, Chaotic Analysis and Machine Learning Diagnosis of Herringbone-grooved Journal Gas Bearing System, Sensors and Materials, Vol. 33(11), pp. 3949-3955. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935] https://doi.org/10.18494/SAM.2021.3721

[A16]     Cheng-I Weng, Li-Ming Chu, Cheng-Chi Wang, and Cai-Wan Chang-Jian, 2021/11, Nonlinear Dynamic Analysis of Turning Machine with and without Nonlinear Suspension, Sensors and Materials, Vol. 33(11), pp. 3917-3929. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935] https://doi.org/10.18494/SAM.2021.3667

[A17]     Tsung-Chia Chen, Ching-Min Hsu, and Cheng-Chi Wang*, 2021/10, Experimental and Simulation Analysis of Effect of Fillet Radius of Micro Square Hole on Copper Sheets in Deep Drawing of Sheets, Sensors and Materials, Vol. 33(10), pp. 3563-3580. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935] https://doi.org/10.18494/SAM.2021.3581

[A18]     Cheng-Chi Wang*, Aniket Mishra, 2021/10, Influence of Oscillation Frequency and Nonlinear Structural Material of Airfoils in Wind Turbine System During Dynamic Stall, Sensors and Materials, Vol. 33(10), pp. 3613-3622. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935] https://doi.org/10.18494/SAM.2021.3625

[A19]     Tsung-Chia Chen, Hao-Wei Ting, Cheng-Chi Wang*, 2021/10, Experiment and Simulation Analysis of Micro-type Circular Rod Screw Thread for SUS304 Stainless Steel in Machining Process, Sensors and Materials, Vol. 33(10), pp. 3473–3488. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935] https://doi.org/10.18494/SAM.2021.3530

[A20]     Ping-Huan Kuo, Rong-Mao Lee, Cheng-Chi Wang*, 2020/9, A High-Precision Random Forest–Based Maximum Lyapunov Exponent Prediction Model for Spherical Porous Gas Bearing Systems, IEEE Access, Vol. 8, pp.168079-168086. (SCIE, Impact Factor: 3.4 (Q2); 87/250, Computer Science, Information Systems; 122/353, Engineering, Electrical & Electronic; 47/119, Telecommunications) [ISSN: 2169-3536] (MOST- 108-2221-E-167 -028 and 108-2622-E-167 -026 -CC3)

[A21]     *Cheng-Chi Wang, Chih-Jer Lin, 2020/9, Bifurcation and Nonlinear Behavior Analysis of Dual-directional Coupled Aerodynamic Bearing Systems, Symmetry-Basel, Vol. 12(9), pp.1521–1543. (SCIE, Impact Factor: 2.2 (Q2); 50/134, Multidisciplinary Sciences) [ISSN: 2073-8994] (MOST- 108-2221-E-167 -028 and 108-2622-E-167 -026 -CC3)

[A22]     *Cheng-Chi Wang, Rong-Mao Lee, Chih-Jer Lin, Chih-Yung Huang, Tsui-Er Lee, 2020/9, Research on the Nonlinear Dynamic Characteristics of Opposed High-Speed Gas Bearing Systems, Journal of Low Frequency Noise Vibration and Active Control, Vol. 39(3), pp.502–522. https://doi.org/10.1177/1461348419834758. (SCIE, Impact Factor: 2.8 (Q1); 9/40, Acoustics)[ISSN: 0263-0923] (MOST-106-2221-E-167-012-MY2 and MOST-106-2622-E-167-010-CC3, 107-2634-F-005 -001 and 106-2622-8-167-001-TE3)

[A23]     *Cheng-Chi Wang, Chih-Wen Chang, Tsui-Er Lee, 2020/9, Dynamic Study of Pocket-Orifice Compensated Air Bearing System, Journal of the Chinese Society of Mechanical Engineers, Vol. 41(5), pp.575–584.(SCI, Impact Factor : 0.2 (Q4); 178/183, Engineering, Mechanical) [ISSN: 0257-9731]. (MOST- 108-2221-E-167 -028 and 108-2622-E-167 -026 -CC3)

[A24]     Bo-Lin Jian, Jui-Pin Hung, *Cheng-Chi Wang, Chun-Chang Liu, 2020/12, Deep Learning Model for Determining Defects of Vision Inspection Machine Using Only a Few Samples, Sensors and Materials, Vol. 32(12), pp.4217–4231. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935]

[A25]     Chih-Neng Hsu, Chun-Chih Chen, Chen-Hui Chang, Cheng-Chi Wang, 2020/12, Using Graphene-powder-based Thermal Interface Material for High Lumen LED Array Chip: An Experimental Study of Heat Dissipation, Sensors and Materials, Vol. 32(12), pp.4277–4297. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935]

[A26]     Te-Jung Chen, Cheng-Chi Wang, Rong-Mao Lee, 2020/11, Numerical Study on Frequency Limitation of Sensing Signal for Maglev Rotor Displacement, Sensors and Materials, Vol. 32(11), pp.3679–3687. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935]

[A27]     Chih-Jer Lin, Wen-Lin Chu, Cheng-Chi Wang, Chih-Keng Chen, I-Ting Cheng, 2020/12, Diagnosis of Ball Bearing Faults Using Support Vector Machine Based on the Artificial Fish-Swarm Algorithm, Journal of Low Frequency Noise Vibration and Active Control, Vol. 39(4) pp.954–967. (SCIE, Impact Factor: 2.8 (Q1); 9/40, Acoustics) [ISSN: 0263-0923] (MOST-106-2221-E-167-012-MY2 and MOST-106-2622-E-167-010-CC3, 107-2634-F-005 -001 and 106-2622-8-167-001-TE3)

[A28]     *Cheng-Chi Wang, Xin-Xiang Zhuo, Yong-Quan Zhu, 2020/3, Optimization Analysis of Vibration for Grinder Spindle, Sensors and Materials, Vol. 32(1), pp.407-416. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935] (MOST- 107-2622-E-167-002 -CC3)

[A29]     Rong-Mao Lee, Zhi-Bin Wu, Cheng-Chi Wang, and Tsung-Chia Chen, 2020/3, Multi-Hybrid Active Magnetic Bearing Design for Milling Spindle Applications, Sensors and Materials, Vol. 32(1), pp.375-385. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935]

[A30]     Rong-Mao Lee, Yi-Hsing Yu, Cheng-Chi Wang, Tsung-Chia Chen, and Pongpon Nilaphruek, 2020/3, Acoustic Signal Analysis by Teager-Huang Transform for Milling Chatter Recognition, Sensors and Materials, Vol. 32(3), pp.873–884. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935]

[A31]     Bo-Lin Jian, Cheng-Chi Wang, Her-Terng Yau, Li-Wei Wu, An-Hong Tian, 2020/3, Optimization of Lathe Cutting Parameters using Taguchi Quality and Grey Relational Analysis, Sensors and Materials, Vol. 32(3), pp.843–858. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935]

[A32]     Rong-Mao Lee, Shih-Hsuan Hu, Cheng-Chi Wang, Tsung-Chia Chen, and Jui-Hung Liu, 2020/3, Design and Development of Condition Monitoring System for Wind Turbines Based on Generator Output Voltages, Sensors and Materials, Vol. 32(3), pp.895–907. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935]

[A33]     Chin-Tsung Hsieh, Her-Terng Yau, *Cheng-Chi Wang, Yi-Sheng Hsieh, 2019/12, Nonlinear Behavior Analysis and Control of the Atomic Force Microscope and Circuit Implementation, Journal of Low Frequency Noise Vibration and Active Control, Vol. 38(3-4), pp. 1576-1593.  (SCIE, Impact Factor: 2.8 (Q1); 9/40, Acoustics)  [ISSN: 0263-0923] (MOST- 106-2221-E-167-012-MY2, 106-2218-E-167001 & 106-2622-E-167-010-CC3).

[A34]     *Cheng-Chi Wang, Rong-Mao Lee, Her-Terng Yau, Tsui-Er Lee, 2019/12, Nonlinear Analysis and Simulation of Active Hybrid Aerodynamic and Aerostatic Bearing System, Journal of Low Frequency Noise Vibration and Active Control, Vol. 38(3-4), pp. 1404-1421, https://doi.org/10.1177/1461348418792737. (SCIE, Impact Factor: 2.8 (Q1); 9/40, Acoustics) [ISSN: 0263-0923] (MOST-106-2221-E-167-012-MY2 and MOST-106-2622-E-167-010-CC3, 107-2634-F-005 -001 and 106-2622-8-167-001-TE3)

[A35]     Bo-Lin Jian, Cheng-Chi Wang, Chin-Tsung Hsieh, Ying-Piao Kuo, Mao-Chin Houng, Her-Terng Yau, 2019/10, Predicting Spindle Displacement Caused by Heat Using the General Regression Neural Network, International Journal of Advanced Manufacturing Technology, Vol. 104, pp.4665-4674. https://doi.org/10.1007/s00170-019-04261-5 (SCIE, Impact Factor: 2.9 (Q2); 36/84, Automation & Control Systems; 29/68, Engineering, Manufacturing) [ISSN: 1433-3015] (MOST- 107-2622-E-167-002 -CC3)

[A36]     Bo-Lin Jian, Cheng-Chi Wang, Jin-Yu Chang, Xiao-Yi Su, Her-Terng Yau, 2019/6, Machine Tool Chatter Identification Based on Dynamic Errors of Different Self-synchronized Chaotic Systems of Various Fractional Orders, IEEE Access, Vol. 7, pp.67278-67286. (SCIE, Impact Factor: 3.4 (Q2); 87/250, Computer Science, Information Systems; 122/353, Engineering, Electrical & Electronic; 47/119, Telecommunications) [ISSN: 2169-3536] (MOST-106-2221-E-167-012-MY2)

[A37]     Her-Terng Yau, Cheng-Chi Wang, Jin-Yu Chang, and Xiao-Yi Su, 2019/1, A Study on the Application of Synchronized Chaotic Systems of Different Fractional Orders for Cutting Tool Wear Diagnosis and Identification, IEEE Access, Vol. 7, pp.15903-15911. (SCIE, Impact Factor: 3.4 (Q2); 87/250, Computer Science, Information Systems; 122/353, Engineering, Electrical & Electronic; 47/119, Telecommunications) [ISSN: 2169-3536] (MOST-106-2221-E-167-012-MY2)

[A38]     Rong-Mao Lee, Pao-Ting Liu, Cheng-Chi Wang, 2018/11, Investigation of Milling Stability Under Cutting Fluid Supply by Microphone Signal Analysis, Sensors and Materials, Vol. 30(11), pp.2419-2428. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935].

[A39]     *Cheng-Chi Wang, Chih-Jer Lin, Chin-Chia Liu, Chia-Chiang Hsu, 2018/11, Analysis of Pull-In Characteristics of Double-Clamped Nanobeam Incorporating Casimir and van der Waals Effects, Sensors and Materials, Vol. 30(11), pp.2627-2636. (SCIE, Impact Factor: 1.0 (Q4); 62/76, Instruments & Instrumentation; 377/439, Materials Science, Multidisciplinary) [ISSN: 0914-4935].

[A40]     Chih-Wen Chang, Chein-Hung Liu, *Cheng-Chi Wang, 2018/6, A Modified Polynomial Expansion Algorithm for Solving the Steady-state Allen-Cahn Equation for Heat Transfer in Thin Films, Applied Sciences-Basel, Vol. 8(6), pp.983-998. (doi:10.3390/app8060983). (SCI, Impact Factor : 2.5 (Q1); 44/181, Engineering, Multidisciplinary; 87/179, Physics, Applied) [ISSN: 2076-3417].

[A41]     Chih-Wen Chang, Chein-Hung Liu, *Cheng-Chi Wang, 2018/1, Review of Computational Schemes in Inverse Heat Conduction Problems, Smart Science, Vol. 6(1), pp.94-103. (ESCI) https://doi.org/10.1080/23080477.2017.1408987(ESCI, Impact Factor: 2.4 (Q2); 46/134, MMultidisciplinary Sciences) [ISSN: 2308-0477].

[A42]     *Cheng-Chi Wang, Tsui-Er Lee, 2017/9, Nonlinear Dynamic Analysis of Bi-directional Porous Aero-thrust Bearing Systems, Advances in Mechanical Engineering, Vol. 9(12), pp.1-11. DOI: 10.1177/1687814017738153 (SCIE, Impact Factor: 1.9 (Q2); 39/78, Thermodynamics; 92/183, Engineering, Mechanical) [ISSN: 1687-8132] (MOST- 105-2221-E-167-010, MOST 105-2622-E-167 -007 -CC3)

[A43]     *Cheng-Chi Wang, 2017/7, Non-periodic and Chaotic Response of Three-Multilobe Air Bearing System, Applied Mathematical Modelling, Vol.47, pp.859-871.  (SCIE, Impact Factor: 4.4 (Q1); 22/181, Engineering, Multidisciplinary; 10/135, Mathematics, Interdisciplinary Applications; 22/170, Mechanics) [ISSN: 0307-904X] (MOST-104-2622-E-167-006-CC3, MOST-104-2221-E-167-014)

[A44]     Chin-Tsung Hsieh, Her-Terng Yau, *Cheng-Chi Wang, 2017/7, Control Circuit Design and Chaos Analysis in an Ultrasonic Machining System, Engineering Computations, Vol. 34(7), pp.2189-2211, https://doi.org/10.1108/EC-02-2017-0044 (SCIE, Impact Factor: 1.5 (Q3); 75/181, Engineering, Multidisciplinary; 67/107, Mathematics, Interdisciplinary Applications; 102/137, Mechanics) [ISSN: 0264-4401] (MOST- 105-2221-E-167-010, MOST 105-2622-E-167 -007 -CC3)

[A45]     *Cheng-Chi Wang, 2017/2, Chaotic Behaviour Investigation of a Front Opposed-Hemispherical Spiral-Grooved Air Bearing System, Shock and Vibration, Vol. 2017 (2017), Article ID 8985040, 18 pages. (SCIE, Impact Factor: 1.2 (Q3); 25/40, Acoustics; 135/183, Engineering, Mechanical; 132/170, Mechanics)  [ISSN: 1070-9622] (MOST-104-2622-E-167-006-CC3, MOST-104-2221-E-167-014)

[A46]     Chin-Tsung Hsieh, Her-Terng Yau, *Cheng-Chi Wang, I-Sheng Hsieh, 2016/8, Particle Swarm Optimization used with Proportional–Derivative Control to Analyze Nonlinear Behavior in the Atomic Force Microscope, Advances in Mechanical Engineering, Vol.8(issue 9), pp.1-10. (SCIE, Impact Factor: 1.9 (Q2); 39/78, Thermodynamics; 92/183, Engineering, Mechanical) [ISSN: 1687-8132] (MOST-104-2622-E-167-006-CC3, MOST-104-2221-E-167-014)  

[A47]     *Cheng-Chi Wang and Jui-Pin Hung, 2016/5, Theoretical and Bifurcation Analysis of a Flexible Rotor Supported by Gas-Lubricated Bearing System with Porous Bushing, Journal of Vibroengineering, Vol.18(issue3), pp.1934-1940. (SCIE, Impact Factor: 0.7; 162/183, Engineering, Mechanical) [ISSN: 1392-8716] (MOST 103-2622-E-167 -015 -CC3 and 103-2221-E-167 -011)

[A48]      Tsung-Chia Chen, Chia-Jung Chang, Jui-Pin Hung, Rong-Mao Lee, Cheng-Chi Wang, 2016/4, Real-Time Compensation for Thermal Errors of the Milling Machine, Applied Sciences-Basel, Vol.6(issue 4), pp.1-13. (doi:10.3390/app6040101). (SCI, Impact Factor : 2.5 (Q2); 44/181, Engineering, Multidisciplinary; 87/179, Physics, Applied) [ISSN: 2076-3417]

[A49]     Ming-Yi Tsai, Sheng-Yen Chang, Jui-Pin Hung, Cheng-Chi Wang, 2016/4, Investigation of Milling Cutting Forces and Cutting Coefficient for Aluminum 6060-T6, Computers & Electrical Engineering, Vol.51, pp.320-330. (SCI, Impact Factor : 4.0 (Q1); 11/59, Computer Science, Hardware & Archtecture；46/170, Computer Science, Interdisciplinary Applications；100/353, Engineering, Electrical & Electronic) [ISSN: 0045-7906]

[A50]     Kuo-Nan Yu, *Cheng-Chi Wang, Her-Terng Yau, Jen-Liang Chen, 2016/4, Numerical Computation and Nonlinear Dynamic Analysis of Ultrasonic Cutting System, Computers & Electrical Engineering, Vol.51, pp.270-283. (SCI, Impact Factor : 4.0 (Q1); 11/59, Computer Science, Hardware & Archtecture；46/170, Computer Science, Interdisciplinary Applications；100/353, Engineering, Electrical & Electronic) [ISSN: 0045-7906]

[A51]     *Cheng-Chi Wang, Tsui-Er Lee, 2016/1, Optimization Design and Application of Composite Ultrasonic Extraction Method for Effective Constituents of Green Tea, Advances in Mechanical Engineering, Vol.8(issue 1), pp.1-9. (SCIE, Impact Factor: 1.9 (Q2); 39/78, Thermodynamics; 92/183, Engineering, Mechanical) [ISSN: 1687-8132] (NSC-98-2622-E-269-004-CC3, NSC-102-2221-E-167-035, NSC-102-2622-E-167-013-CC3)

[A52]     *Cheng-Chi Wang, Tsui-Er Lee, 2016, Performance Analysis and Improvement Design of Golf Clubs, Transactions of the Canadian Society for Mechanical Engineering, Vol.40(issue 4), pp.667-675. (SCIE, Impact Factor: 0.8 (Q4); 158/183, Engineering, Mechanical) [ISSN: 0135-8977] (MOST 103-2622-E-167 -015 -CC3 and 103-2221-E-167 -011)

[A53]     Her-Terng Yau, Cheng-Chi Wang, Chin-Tsung Hsieh, Shang-Yi Wu, 2015/9, Fractional Order Sprott Chaos Synchronization-Based Real-Time Extension Power Quality Detection Method, IET Generation Transmission & Distribution, Vol.9(issue16), pp.2775-2781. (SCI, Impact Factor : 2.0 (Q3); 203/353, Engineering, Electrical & Electronic) [ISSN: 1751-8687] DOI:  10.1049/iet-gtd.2015.0500

[A54] *Cheng-Chi Wang, Shane-Rong Sheu, Her-Terng Yau, and Ming-Jyi Jang, 2015/8, Effect of Coffee Reduction on Constituent Concentration in an Energy-Efficient Process of Ultrasonic Extraction, Thermal Science, Vol.19(issue4), pp.1383-1387. (SCIE, Impact Factor: 1.1 (Q4); 60/78, Thermodynamics) [ISSN: 0354-9836] (MOST-104-2221-E-167-014 & MOST-104-2622-E-167-006-CC3).

[A55] Jui-Ho Chen and *Cheng-Chi Wang, 2015/4, Chaotic and Dynamic Analysis of a Flexible Rotor Supported by Ultra Short Aero-lubricated Bearing System, Journal of Applied Research and Technology, Vol. 13(2), pp.328-341. (SCI, Impact Factor: 0.447 (Q4); 71/87, Engineering, Multidisciplinary; 203/248, Engineering, Electrical & Electronic) [ISSN: 2308-0477] (MOST 103-2221-E-167 -011)

[A56] Chin-Chia Liu and Cheng-Chi Wang, 2014/7/1, Numerical Investigation Into Nonlinear Dynamic Behavior of Electrically-Actuated Clamped-Clamped Micro-Beam with Squeeze-Film Damping Effect, Applied Mathematical Modelling, Vol.38(issue13), pp.3269-3280. (SCIE, Impact Factor: 4.4 (Q1); 22/181, Engineering, Multidisciplinary; 10/135, Mathematics, Interdisciplinary Applications; 22/170, Mechanics)  [ISSN: 0307-904X] (NSC-100-2628-E-269-016 -MY2)

[A57] *Cheng-Chi Wang and Chin-Chia Liu, 2014/6, Chaotic Dynamic Analysis of Aquatic Phytoplankton System, Mathematical Problems in Engineering, Vol. 2014, Article ID 586262. (http://dx.doi.org/10.1155/2014/586262). (SCI, Impact Factor: 1.43 (Q3); 68/90, Engineering, Multidisciplinary; 84/108, Mathematics, Interdisciplinary Applications) [ISSN: 1204-123X] (Most 103-2622-E-167-015-CC3)

[A58]     *Cheng-Chi Wang, Chieh-Li Chen and Her-Terng Yau, 2014/4/1, Bifurcation and Chaotic Analysis of Aeroelastic Systems, ASME Journal of Computational and Nonlinear Dynamics, Vol.9(issue2), Article ID 021004, 13 pages (http://dx.doi.org/10.1115/1.4025124). (SCI, Impact Factor: 1.9 (Q3); 92/183, Engineering, Mechanical; 96/170, Mechanics) [ISSN: 1555-1423] (NSC-100-2628-E-269-016 -MY2)

[A59] *Cheng-Chi Wang, Chin-Chia Liu and Chi-Chang Wang, 2014/4, Bifurcation and Nonlinear Dynamic Analysis of Externally Pressurized Double Air films Bearing System, Mathematical Problems in Engineering, Vol. 2014, Article ID 798374. (http://dx.doi.org/10.1155/2014/798374). (SCI, Impact Factor: 1.43 (Q4); 68/90, Engineering, Multidisciplinary; 84/108, Mathematics, Interdisciplinary Applications)  [ISSN: 1204-123X] (NSC-100-2628-E-269-016 -MY2 & NSC-102-2221-E-167-035)

[A60]     *Cheng-Chi Wang, Po-Jen Cheng, Kuo-Chi Liu and Ming-Yi Tsai, 2014/2, Flow and Stress Field Analysis of Different Fluids and Blades for Fermentation Process, Advances in Mechanical Engineering, Vol. 2014, Article ID 623781, 10 pages (http://dx.doi.org/10.1155/2014/623781). (SCIE, Impact Factor: 1.9 (Q2); 39/78, Thermodynamics; 92/183, Engineering, Mechanical) [ISSN: 1687-8132] (NSC-98-2622-E-269-004-CC3, NSC-102-2221-E-167-035, NSC-102-2622-E-167-013-CC3)

[A61]     Kuo-Chi Liu, Cheng-Chi Wang and Po-Jen Cheng, 2013/12, Nonlinear Behavior of Thermal Lagging in Laser-Irradiated Layered Tissue, Advances in Mechanical Engineering, Vol. 2013, Article ID 732575, 6 pages(http://dx.doi.org/10.1155/2013/732575). (SCIE, Impact Factor: 1.9 (Q2); 39/78, Thermodynamics; 92/183, Engineering, Mechanical) [ISSN: 1687-8132]

[A62]     *Cheng-Chi Wang, Her-Terng Yau and Chi-Chang Wang, 2013/12, Chaotic and Subharmonic motion Analysis of Floating Ring Gas Bearing System by Hybrid Numerical Method, Mathematical Problems in Engineering, Vol. 2013, Article ID 145716, 14 pages (http://dx.doi.org/10.1155/2013/145716). (SCI, Impact Factor: 1.43 (Q4); 68/90, Engineering, Multidisciplinary; 84/108, Mathematics, Interdisciplinary Applications)  [ISSN: 1204-123X] (NSC-100-2628-E-269-016 -MY2)

[A63]     *Cheng-Chi Wang and Her-Terng Yau, 2013/12, Application of Hybrid Microwave Thermal Extraction Techniques for Mulberry Root Bark, Thermal Science, Vol. 17(issue 5), pp.1311-1315. (SCIE, Impact Factor: 1.1 (Q4); 60/78, Thermodynamics) [ISSN: 0354-9836] ( NSC-98-2221-E-167-030-MY2).

[A64] *Cheng-Chi Wang, Chung-Neng Huang, Her-Terng Yau and Shin-Xiang Hsu, 2013/11, Bifurcation and Chaos Analysis of Atomic Force Microscope System, Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, Vol.19(issue11), pp.1795-1805. (SCI, Impact Factor: 1.6 (Q3); 240/353, Engineering, Electrical & Electronic; 114/141, Nanoscience & Nanotechnology; 332/439, Materials Science, Multidisciplinary; 132/179, Physics, Applied) [ISSN: 1204-123X] (NSC-100-2628-E-269-016 -MY2)

[A65] *Cheng-Chi Wang and Her-Terng Yau, 2013/10, Bifurcation Analysis of Bearing Number in Ultra short Gas Bearing System, Smart Science, Vol. 1(issue1), pp.18-24. (ESCI, Impact Factor: 2.4 (Q2); 46/134, MMultidisciplinary Sciences) [ISSN: 2308-0477] (NSC-102-2221-E-167-035)

[A66]     *Cheng-Chi Wang and Her-Terng Yau, 2013/9, Chaos Analysis and Synchronization Control of Coronary Artery Systems, Abstract and Applied Analysis, Vol. 2013 (2013), Article ID 209718, 11 pages(http://dx.doi.org/10.1155/2013/209718). (SCI, Impact Factor: 1.274 (Q4); 50/251, Mathematics, Applied; 23/302, Mathematics) [ISSN: 1085-3375] (NSC-100-2628-E-269-016 -MY2)

[A67]     *Cheng-Chi Wang, Shane-Rong Sheu and Ming-Jyi Jang, 2013/4, Analysis of Supercritical Carbon Dioxide Extraction for the Caffeine and Epigallocatechin-3-gallate in Green Tea, Journal of Biobased Materials and Bioenergy, Vol.7(issue 2), pp.208-212. (SCI, Impact Factor:0.5 (Q4); 64/74, Chemistry, Applied; 108/114, Energy & Fuels; 41/41, Materials Science, Biomaterials) [ISSN: 1556-6560] (NSC 101-2622-E-269 -010 -CC3)

[A68]     *Cheng-Chi Wang and Chi-Chang Wang, 2013/4, Bifurcation and Nonlinear Dynamic Analysis of Noncircular Aerodynamic Journal Bearing System, Nonlinear Dynamics, Vol.72(issue1), pp.477-489. (SCI, Impact Factor: 5.2 (Q1); 22/183, Engineering, Mechanical; 14/170, Mechanics) [ISSN: 0924-090X] (NSC-100-2628-E-269-016 -MY2)

[A69]     *Cheng-Chi Wang, 2012/9, Bifurcation and Nonlinear Dynamic Analysis of United Gas-lubricated Bearing System, Computers & Mathematics with Applications, Vol.64(issue5), pp.729-738. (SCI, Impact Factor: 2.9 (Q1); 20/332, Mathematics, Applied) [ISSN: 0898-1221] (NSC-100-2628-E-269-016 -MY2)

[A70]     *Cheng-Chi Wang, and Her-Terng Yau, 2011/10, Nonlinear Dynamic Analysis and Sliding Mode Control for a Gyroscope System, Nonlinear Dynamics, Vol.66(issue1-2), pp.53-65. (SCI, Impact Factor: 5.2 (Q1); 22/183, Engineering, Mechanical; 14/170, Mechanics) [ISSN: 0924-090X]  (NSC-98-2221-E-269-016)

[A71]     *Cheng-Chi Wang, 2011/10, Application of a Hybrid Method to the Bifurcation Analysis of a Relative Short Gas Journal Bearing System with Herringbone Grooves, Industrial Lubrication and Tribology, Vol.63(issue5), pp.307-319. (SCI, Impact Factor: 1.5 (Q3); 115/183, Engineering, Mechanical). [ISSN: 0036-8792] (NSC-97-2221-E-269-022)

[A72]     Chien-Nan Lin, Cheng-Chi Wang and Yi-Pin Kuo, 2011/6, The Heat and Fluid Flow Analysis for Water Heater, Thermal Science, Vol.15(issue:S1), pp.81-86. (SCIE, Impact Factor: 1.1 (Q4); 60/78, Thermodynamics) [ISSN: 0354-9836] (NSC-98-2221-E-269-016)

[A73]     *Cheng-Chi Wang, Ya-Yen  Chou, Shane-Rong Sheu and Ming-Jyi Jang, 2011/6, Application of Ultrasound Thermal Process on Extracting Flavor and Caffeine of Coffee, Thermal Science, Vol.15(issue:S1), pp.69-74. (SCIE, Impact Factor: 1.1 (Q4); 60/78, Thermodynamics) [ISSN: 0354-9836] (NSC-98-2622-E-269-004-CC3 & NSC-98-2221-E-012)

[A74]     *Cheng-Chi Wang, Her-Terng Yau, Chien-Nan Lin, Po-Jen Cheng and Wei-Min Hung, 2011/6, Application of Lattice Boltzmann Method and Field Synergy Principle to the Heat Transfer Analysis of Channel Flow with Obstacles inside, Thermal Science, Vol.15(issue:S1), pp.75-80. (SCIE, Impact Factor: 1.1 (Q4); 60/78, Thermodynamics) [ISSN: 0354-9836] (NSC-99-2221-E-269-008 & NSC-99-2221-E-269-009-MY2)

[A75]     Her-Terng Yau, Cheng-Chi Wang, Ching-Chang Cho and Chao-Kuang Chen, 2011/6, A Numerical Investigation into Electroosmotic Flow in Microchannels with Complex Wavy Surfaces, Thermal Science, Vol.15(issue:S1), pp.87-94. (SCIE, Impact Factor: 1.1 (Q4); 60/78, Thermodynamics) [ISSN: 0354-9836] ( NSC-98-2221-E-167-030-MY2).

[A76]     *Cheng-Chi Wang, Shane-Rong Sheu, Ya-Yen Chou and Ming-Jyi Jang, 2011/6, A Novel Optimized Energy-Saving Extraction Process on Coffee, Thermal Science, Vol.15(issue:S1), pp.53-59. (SCIE, Impact Factor: 1.1 (Q4); 60/78, Thermodynamics) [ISSN: 0354-9836] (NSC-98-2622-E-269-004-CC3 & NSC-98-2221-E-269-012)

[A77]     *Cheng-Chi Wang, and Her-Terng Yau, 2011/4, Application of the Differential Transformation Method to Bifurcation and Chaotic Analysis of an AFM Probe Tip, Computers & Mathematics with Applications, Vol.61(issue8), pp.1957-1962. (SCI, Impact Factor: 2.9 (Q1); 20/332, Mathematics, Applied) [ISSN: 0898-1221] (NSC-98-2221-E-269-016 & NSC-99-2221-E-269-008)

[A78]     Her-Terng Yau, Cheng-Chi Wang, Chin-Tsung Hsieh and Ching-Chang Cho, 2011/4, Nonlinear Analysis and Control of the Uncertain Micro-electro-mechanical System by Using a Fuzzy Sliding Mode Control Design, Computers & Mathematics with Applications, Vol.61(issue8), pp.1912-1916. (SCI, Impact Factor: 2.9 (Q1); 20/332, Mathematics, Applied) [ISSN: 0898-1221] (NSC-98-2221-E-269-016)

[A79]     *Cheng-Chi Wang, 2011/1/10, Bifurcation Analysis of High Speed Spindle Air Bearings, Journal of Vibration and Control, Vol.17(issue1), pp.103-114. (SCI, Impact Factor: 2.3 (Q2); 13/40, Acoustics; 72/183, Engineering, Mechanical; 75/170, Mechanics) [ISSN: 1077-5463] (NSC-97-2221-E-269-022  & NSC-98-2221-E-269-016)

[A80]    *Cheng-Chi Wang and Her-Terng Yau, 2010/11/1, Theoretical Analysis of High Speed Spindle Air Bearings by a Hybrid Numerical Method, Applied Mathematics and Computation, Vol.217(issue5), pp.2084-2096 (SCI, Impact Factor: 3.5 (Q1); 10/332, Mathematics, Applied) [ISSN: 0096-3003] (NSC-97-2221-E-269-022)

[A81]     *Cheng-Chi Wang, 2010/9, Bifurcation and Nonlinear Analysis of a Flexible Rotor Supported by a Relative Short Spherical Gas Bearing System, Communications in Nonlinear Science and Numerical Simulation, Vol.15(issue9), pp.2659-2671. (SCI, Impact Factor : 3.4 (Q1); 12/332, Mathematics, Applied; 18/135, Mathematics, Interdisciplinary Applications; 39/170, Mechanics; 5/40, Physics, Fluids & Plasmas; 4/60, Physics, Mathematical) [ISSN: 1007-5704](NSC-97-2221-E-269-022  & NSC-98-2221-E-269-016)

[A82] Neng-Sheng Pai, *Cheng-Chi Wang and David T-W Lin, 2010/9, Bifurcation Analysis of a Microcantilever in AFM System, Journal of The Franklin Institute-Engineering and Applied Mathematics, Vol.347(issue7), pp.1353-1367. (SCI, Impact Factor: 3.7 (Q1); 26/84, Automation & Control Systems; 112/353, Engineering, Electrical & Electronic; 15/90, Engineering, Multidisciplinary; 10/108, Mathematics, Interdisciplinary Applications) [ISSN: 0016-0032] (NSC-95-2221-E-269-016)

[A83]     *Cheng-Chi Wang and Chao-Lin Kuo , 2010/8, Nonlinear Dynamic Analysis of a Relatively Short Spherical Gas Journal Bearing System, Journal of Mechanical Science and Technology, Vol.24(issue8), pp.1565-1571. (SCI, Impact Factor: 1.5 (Q3), 115/183, Engineering, Mechanical) [ISSN: 1738-494X] (NSC-97-2221-E-269-022)

[A84]     *Cheng-Chi Wang, Neng-Sheng Pai and Her-Terng Yau, 2010/3, Chaos Control in AFM System Using Sliding Mode Control by Backstepping Design, Communications in Nonlinear Science and Numerical Simulation, Vol.15(issue3), pp.741-751. (SCI, Impact Factor : 3.4 (Q1); 12/332, Mathematics, Applied; 18/135, Mathematics, Interdisciplinary Applications; 39/170, Mechanics; 5/40, Physics, Fluids & Plasmas; 4/60, Physics, Mathematical) [ISSN: 1007-5704] (NSC-97-2221-E-269-022)

[A85] *Cheng-Chi Wang, 2010/3, Application of a Hybrid Numerical Method to the Nonlinear Dynamic Analysis of a Micro Gas Bearing System, Nonlinear Dynamics, Vol.59(issue4), pp.695-710 (SCI, Impact Factor: 5.2 (Q1); 22/183, Engineering, Mechanical; 14/170, Mechanics) [ISSN: 0924-090X] (NSC-96-2221-E-269-009  &  NSC-99-2221-E-269-022)

[A86]     Her-Terng Yau and Cheng-Chi Wang, 2009/8, Dynamics Analysis and Fuzzy Logic Controller Design of Atomic Force Microscope System with Uncertainties, Journal of Optoelectronics and Advanced Materials, Vol.11(issue8), pp.1178-1184. (SCI, Impact Factor : 0.6; 409/439, Materials Science, Multidisciplinary; 109/119, Optics; 171/179, Physics, Applied) [ISSN: 1454-4164] (NSC-96-2221-E-269-009)

[A87]     Yen-Liang Yeh, Cheng-Chi Wang, Ming-Jyi Jang and Yen-Pin Lin, 2009/5, A High-precision Measurement Technique for Evaluating Alcohol Concentrations Using an Optical Metrology System Based on a Position Sensing Detector, Optics and Lasers in Engineering, Vol.47(issue5), pp.599-603. (SCI, Impact Factor: 3.5 (Q2); 32/119, Optics) [ISSN: 0143-8166] (NSC-97-2221-E-269-022)

[A88]     *Cheng-Chi Wang and Her-Terng Yau, 2009/4, Chaotic Analysis and Control of Microcandilevers with PD feedback Using Differential Transformation Method, International Journal of Nonlinear Sciences and Numerical Simulation, Vol.10(issue4), pp.425-444. (SCI, Impact Factor : 1.4 (Q2); 80/181, Engineering, Multidisciplinary; 102/332, Mathematics, Applied; 86/135, Mechanics; 20/55, Physics, Mathematical) [ISSN: 1565-1339] (NSC-96-2221-E-269-009)

[A89]     *Cheng-Chi Wang, 2009/3/1, Application of a Hybrid Method to the Nonlinear Dynamic Analysis of a Flexible Rotor Supported by a Spherical Gas-lubricated Bearing System, Nonlinear Analysis-Theory Methods & Applications, Vol.70(issue5), pp.2035-2053. (SCI, Impact Factor : 1.3 (Q1); 67/490, Mathematics; 124/332, Mathematics, Applied) [ISSN: 0362-546X] (NSC-95-2221-E-269-016)

[A90]     *Cheng-Chi Wang, 2008/9, Theoretical and Nonlinear behavior Analysis of a Flexible Rotor Supported by a Relative Short Herringbone-Grooved Gas Journal-Bearing System, Physica D-Nonlinear Phenomena, Vol.237(issue18), pp.2282-2295. (SCI, Impact Factor: 2.7 (Q1); 25/332, Mathematics, Applied; 11/40, Physics, Mathematical) [ISSN: 0167-2789] (NSC-96-2221-E-269-009)

[A91]     *Cheng-Chi Wang and Her-Terng Yau, 2008/6, Analysis of Nonlinear Dynamic Behavior of Atomic Force Microscope Using Differential Transformation Method, ACTA Mechanica, Vol.198(issue1-2), pp.87-98. (SCI, Impact Factor: 2.3 (Q2); 75/170, Mechanics) [ISSN: 0001-5970] (NSC-96-2221-E-269-009)

[A92]     *Cheng-Chi Wang and Her-Terng Yau, 2008/3, Application of a Hybrid Numerical Method to the Bifurcation Analysis of a Rigid Rotor Supported by a Spherical Gas Journal Bearing System, Nonlinear Dynamics, Vol.51(issue4), pp.515-528. (SCI, Impact Factor: 5.2 (Q1); 22/183, Engineering, Mechanical; 14/170, Mechanics) [ISSN: 0924-090X] (NSC-95-2221-E-269-016)

[A93]     *Cheng-Chi Wang, 2007/8, Bifurcation Analysis of an Aerodynamic Journal Bearing System Considering the Effect of Stationary Herringbone Grooves, Chaos Solitons & Fractals, Vol.33(issue5), pp.1532-1545. (SCIE, Impact Factor: 5.3 (Q1); 2/60, Physics, Mathematical; 7/135, Mathematics, Interdisciplinary Applications; 18/112, Physics, Multidisciplinary) [ISSN: 0960-0779] (NSC-94-2212-E-269-009)

[A94]     Yen-Liang Yeh, Cheng-Chi Wang and Ming-Jyi Jang, 2007/7/15, Using Finite Difference and Differential Transformation Method to Analyze of Large Deflections of Orthotropic Rectangular Plate Problem, Applied Mathematics and Computation, Vol.190(issue2), pp.1146-1156. (SCI, Impact Factor: 3.5 (Q1); 10/332, Mathematics, Applied)  [ISSN: 0096-3003] (NSC-93-2622-E-269-031-CC3)

[A95]     *Cheng-Chi Wang, Ming-Jyi Jang and Yen-Liang Yeh, 2007/4, Bifurcation and Nonlinear Dynamic Analysis of A Flexible Rotor Supported By Relative Short Gas Journal Bearings, Chaos Solitons & Fractals, Vol.32(issue2), pp.566-582. (SCIE, Impact Factor: 5.3 (Q1); 2/60, Physics, Mathematical; 7/135, Mathematics, Interdisciplinary Applications; 18/112, Physics, Multidisciplinary) [ISSN: 0960-0779] (NSC-94-2212-E-269-009)

[A96]     Ming-Jyi Jang, *Cheng-Chi Wang and Cheng-Yu Wu, 2007/4, An Enhanced Common Path Interference Optic Measurement System for Refractive Indices and Thickness, Optics and Laser Technology, Vol.39(issue3), pp.500-506. (SCI, Impact Factor: 4.6 (Q1); 21/119, Optics; 45/179, Physics, Applied) [ISSN: 0030-3992] (NSC-93-2745-E-269-001)

[A97]     *Cheng-Chi Wang, Her-Terng Yau, Ming-Jyi Jang and Yen-Liang Yeh, 2007/3, Theoretical Analysis of the Non-linear Behavior of a Flexible Rotor Supported by Herringbone Grooved Gas Journal Bearings, Tribology International, Vol.40(issue3), pp.533-541. (SCI, Impact Factor: 6.1 (Q1); 10/183, Engineering, Mechanical) [ISSN: 0301-679X] (NSC 92-2212-E-269-012)

[A98]     Cheng-Chi Wang, Ming-Jyi Jang and Yuan-Hung Peng, 2007, An Enhanced Common Path Interference Measurement for Optical Refractive Indices, Key Engineering Materials, Vol.364-366, pp.86-91, (SCIE, Impact Factor: 0.224 (Q3); 19/28, Materials Science, Ceramics; 20/23, Materials Science, Composites) [ISSN: 1013-9826]. (NSC-93-2745-E-269-001)

[A99] Yen-Liang Yeh, Cheng-Chi Wang, Ming-Jyi Jang, Yen-Pin Lin and Kuang-Sheng Chen, 2007, Determining the thickness and Refractive index of a Birefringence by Using an Improved Accurate Measurement System, Key Engineering Materials, Vol.364-366, pp.510-515. (SCIE, Impact Factor: 0.224 (Q3); 19/28, Materials Science, Ceramics; 20/23, Materials Science, Composites) [ISSN: 1013-9826]. (NSC-93-2745-E-269-001)

[A100] Yen-Liang Yeh, Cheng-Chi Wang, Ming-Jyi Jang, Kuang-Sheng Chen and Yen-Pin Lin, 2007, Effect of the Adhesive Mass at the Cantilever Beam Tip Position, Key Engineering Materials, Vol.364-366, pp.773-778. (SCIE, Impact Factor: 0.224 (Q3); 19/28, Materials Science, Ceramics; 20/23, Materials Science, Composites) [ISSN: 1013-9826]. [ISSN: 1013-9826] (NSC-93-2745-E-269-001)

[A101] Yen-Liang Yeh, Ming-Jyi Jang and Cheng-Chi Wang, 2006/7/15, Analyzing the Free Vibrations of a Plate Using Finite Difference and differential Transformation Method, Applied Mathematics and Computation, Vol.178(issue2), pp.493-501. (SCI, Impact Factor: 3.5 (Q1); 10/332, Mathematics, Applied) [ISSN: 0096-3003] (NSC-93-2622-E-269-031-CC3)

[A102] *Cheng-Chi Wang, 2006/5, Nonlinear Dynamic Behavior and Bifurcation Analysis of A Rigid Rotor Supported by a Relatively Short Externally Pressurized Porous Gas Journal Bearing System, ACTA Mechanica, Vol.183(issue1-2), pp.41-60. (SCI, Impact Factor: 2.3 (Q2); 75/170, Mechanics) [ISSN: 0001-5970] (NSC-92-2212-E-269-012)

[A103] *Cheng-Chi Wang, 2006/1, Analysis of an Aerodynamic Grooved Journal Bearing with Plain Sleeve, Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, Vol.220(issue1), pp.51-60. (SCI, Impact Factor : 1.8 (Q3); 100/183, Engineering, Mechanical) [ISSN: 0954-4062] (NSC-94-2212-E-269-009)

[A104] Jiun-Shen Wang and *Cheng-Chi Wang, 2005/8, Nonlinear Dynamic and Bifurcation Analysis of Short Aerodynamic Journal Bearings, Tribology International, Vol.38(issue8), pp.740-748. (SCI, Impact Factor: 6.1 (Q1); 10/183, Engineering, Mechanical)  [ISSN: 0301-679X] (NSC-92-2212-E-269-012)

[A105] Cheng-Ying Lo, *Cheng-Chi Wang and Yu-Han Lee, 2005/1, Performance Analysis of High-Speed Spindle Aerostatic Bearings, Tribology International, Vol.38(issue1), pp.5-14. (SCI, Impact Factor: 6.1 (Q1); 10/183, Engineering, Mechanical) [ISSN: 0301-679X] (NSC 89-2212-E-006-165)

[A106] *Cheng-Chi Wang, Ming-Jyi Jang and Cha’o-Kuang Chen, 2004/12, Non-linear Dynamic Analysis of a Flexible Rotor Supported by Self-Acting Gas Journal Bearings, Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, Vol.218(issue12), pp.1527-1538. (SCI, Impact Factor : 1.8 (Q3); 100/183, Engineering, Mechanical) [ISSN: 0954-4062]  (NSC 88-2212-E-006-039)

[A107] Jiun-Shen Wang, *Cheng-Chi Wang and Jiin-Hong Lin, 2004/11, Inverse Estimation of Local Heat Transfer Coefficient in a Vertical Plate Fin in Micropolar Fluid Flow, Journal of the Chinese Society of Mechanical Engineers, Vol.25, pp.313-320. (SCI, Impact Factor : 0.2 (Q4); 178/183, Engineering, Mechanical) [ISSN: 0257-9731] (NSC-92-2212-E-269-012)

[A108] *Cheng-Chi Wang and Jiun-Shen Wang, 2004/11, Analysis of Herringbone-Grooved Gas Journal-Bearing System, Journal of the Chinese Society of Mechanical Engineers, Vol.25, pp.189-197. (SCI, Impact Factor : 0.2 (Q4); 178/183, Engineering, Mechanical) [ISSN: 0257-9731] (NSC92-2212-E-269-012)

[A109] *Cheng-Chi Wang and Chen Cha’o-Kuang, 2003/12/1, Bifurcation Analysis of Externally Pressurized Porous Gas Journal Bearings, Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, Vol.217(issue12), pp.1325-1338. (SCI, Impact Factor : 1.8 (Q3); 100/183, Engineering, Mechanical)  [ISSN: 0954-4062] (NSC 88-2212-E-006-039)

[A110] *Cheng-Chi Wang and Cheng-Ying Lo, 2003/4, Thermal Stress Analysis of Semiconductor Wafers in Rapid Thermal Processing, Journal of the Chinese Society of Mechanical Engineers, Vol.24(issue2), pp.127-137. (SCI, Impact Factor : 0.2 (Q4); 178/183, Engineering, Mechanical) [ISSN: 0257-9731] (NSC 89-2212-E-150-038)

[A111] *Cheng-Chi Wang, Cheng-Ying Lo and Cha’o-Kuang Chen, 2002/7, Nonlinear Dynamic Analysis of a Flexible Rotor Supported by Externally Pressurized Porous Gas Journal Bearings, Journal of Tribology-Transactions of the ASME, Vol.124(issue3), pp.553-561. (SCI, Impact Factor : 2.2 (Q2); 76/183, Engineering, Mechanical) [ISSN: 0742-4787] (NSC 88-2212-E-006-039)

[A112] *Cheng-Chi Wang and Cha’o-Kuang Chen, 2001/10, Bifurcation Analysis of Self-Acting Gas Journal Bearings, Journal of Tribology-Transactions of the ASME, Vol.123(issue4), pp.755-768. (SCI, Impact Factor : 2.2 (Q2); 76/183, Engineering, Mechanical) [ISSN: 0742-4787] (NSC 88-2212-E-006-039)

(B)Conference Paper：

[B1]          Aniket Mishra, Her-TerngYau, Ping-Huan Kuo, *Cheng-Chi Wang, 2025, Efficient Multi-objective optimization for carbon emission reduction in machine tools: A Novel NSGA-II Algorithm with reduced complexity, International Conference on Mechanical & Production Engineering (ICMPE), January 2, Munnar, India.

[B2]          Aniket Mishra, Her-TerngYau, Ping-Huan Kuo, *Cheng-Chi Wang, 2024, Carbon-aware adaptive control in machining: A Sustainable Approach to Reduce carbon footprint in machining, 2024 the 11th International Conference on Mechanical, Automotive and Materials Engineering (CMAME 2024), December 18-20, Bangkok, Thailand.

[B3]          Ta-Jen Peng, Jiří Ryšavý, Jakub Čespiva, *Cheng-Chi Wang, Dachepalli Venkata Sai Santhosh Vinay, 2024, Assessing the Impact of Cutting Conditions on Machining Performance and Energy Consumption, International Conference on Sustainable Energy and Green Technology, December 15-18, Bangkok, Thailand.

[B4]          *Cheng-Chi Wang, Ta-Jen Peng, 2024, Evaluation of the Impact of Machining Parameters on Carbon Emission and Surface Roughness, International Conference on Mechatronic, Automobile, and Environment Engineering, July 18-20, 2024, Hanoi, Vietnam.

[B5]          Ta-Jen Peng, *Cheng-Chi Wang, Kuan-Wei Tu, 2024, Optimization for Carbon-reduction Manufacturing Process in Metal Cutting, International Conference on Advanced Materials Science and Engineering, July 12-14, 2024, Yokohama, Japan.

[B6]          *Cheng-Chi Wang, 2022, Nonlinear Dynamic Analysis of Slot-Type Externally Pressurized Air Bearing System, Tribology International Conference 2022, April 27-29, 2022, Barcelone, Spain. (MOST- 110-2221-E-167 -019)

[B7]          Tsung-Chia Chen, Shi-Xun Chen and *Cheng-Chi Wang, 2022, Analysis of the Punch Motion Curve for on the Springback of U-Shaped Sheet Metal, The 3rd International Conference on Nanomaterials and Advanced Composites (NAC 2022), July 15-17, 2022,  Tokushimma University, Josanjima Campus, Japan. (MOST- 110-2221-E-167 -019)

[B8]          *Cheng-Chi Wang, Tzung-Lin Tu, Ping-Huan Kuo, 2022, Machine-Learning Prediction of Grinding Process Using Decision Tree Model, The 3rd International Conference on Nanomaterials and Advanced Composites (NAC 2022), July 15-17, 2022,  Tokushimma University, Josanjima Campus, Japan. (MOST- 110-2221-E-167 -019)

[B9]          Jun-Ji Chen, *Cheng-Chi Wang, Tsung-Chia Chen, Jui-Pin Hung, Tsui-Er Lee, 2020, Analysis on Flow Field Simulation of Straight Fluted Air Bearing, The 3rd Annual International Conference on Engineering, Smart Materials and Technologies (ESMT), April 18-19, 2020,  Hotel MyStays Shin-Osaka Conference Center, Japan. (MOST-108-2622-E-153-004-CC3, MOST-108-2221-E-153 -012 and MOST-108-2622-E-153 -005 -CC3)

[B10]      *Cheng-Chi Wang, Tsui-Er Lee, 2019, Bifurcation Analysis of Reverse Wedge Air Bearing System, Proceedings of 2019 International Conference on Mechatronic, Automobile, and Environment Engineering, July 5-7, 2019, Shizuoka, Japan. (MOST- 106-2221-E-167 -012 -MY2, 107-2218-E-167 -001 and MOST-107-2622-E-167-002-CC3).

[B11]      *Cheng-Chi Wang, Tsui-Er Lee, 2019, Nonlinear Behaviour Analysis of Dual-directional Coupled Aerodynamic Bearing Systems, 2019 International Conference on Smart Science, March 30-April 2, 2019, Gunma, Japan. (MOST-106-2221-E-167-012-MY2, MOST -107-2221-E-167 -026 & MOST-107-2622-E-167 -002 -CC3).

[B12]      *Cheng-Chi Wang, Tsui-Er Lee, 2018, Nonlinear Investigation of Bearing Numbers For Active Hybrid Air Bearing System, 2018 International Conference on Mechatronic, Automobile, and Environmental Engineering, July 7-9, 2018, Chiang Mai, Thailand. (MOST-106-2221-E-167-012-MY2 & MOST-106-2622-E-167-010-CC3).

[B13]      *Cheng-Chi Wang, Tsui-Er Lee, 2018, Bifurcation Analysis of Multi-directional Supported and Coupled Air Bearing Systems, 2018 International Conference on Smart Science-ICSS2018, March 30-April 2, Miyazu, Kyoto, Japan. (MOST-106-2221-E-167-012-MY2 & MOST-106-2622-E-167-010-CC3).

[B14]      Jin-Yu Jhang, Chin-Tsung Hsieh, Her-Terng Yau, Cheng-Chi Wang*, Chaotic Control and Circuit Implementation of the Atomic Force Microscope System, The 12th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, April 9-12, 2017, Los Angeles, USA. (MOST-105-2221-E-167-010 & MOST-105-2622-E-167-007-CC3).

[B15]      Cheng-Chi Wang*, Tsui-Er Lee, 2017, Numerical Simulation for the Dynamic Response of Bi-directional Porous Gas Thrust Bearing Systems, Proceedings of 2017 International Conference on Mechatronic, Automobile, and Environment Engineering, May 27-29, 2017, Yantai, China. (MOST-105-2221-E-167-010 & MOST-105-2622-E-167-007-CC3).

[B16]      Kuo-Nan Yu, Chin-Tsung Hsieh, Cheng-Chi Wang*, Her-Terng Yau, Ming-Jyi Jang, 2016, Influence of Bearing Number on High Speed Air Rotor Bearing Systems, INDIN 2016 IEEE International Conference on Industrial Informatics, July 18-21, 2016, Futuroscope-Poitiers, France. (MOST-104-2221-E-167-014).

[B17]      *Cheng-Chi Wang, and Her-Terng Yau, 2016, Nonlinear Dynamic Analysis of Gas-lubricated Bearings in Aerostatic High Speed Spindle Systems, 2016 International Conference on Materials Processing Technology, March 28-29, 2016, Tokyo, Japan. (MOST-104-2221-E-167-014).

[B18]      *Cheng-Chi Wang, Her-Terng Yau, Chin-Tsung Hsieh, and Yi-Sheng Hsieh, 2015, Chaotic Behavior Analysis of the Probe Tip from Atomic Force Microscope System, 2015 Advances in Materials and Processing Technologies (AMPT) conference, December 14-17, 2015, Madrid, Spain (MOST-104-2221-E-167-014).

[B19]      *Cheng-Chi Wang, Her-Terng Yau, Chi-ChangWang and Jian-Liang Chen, 2015, Bifurcation and Nonperiodic Behavior Simulation of Ultrasonic Cutting System, 2015 International Conference on Applied System Innovation (ICASI 2015), May 22-26, 2015, Osaka, Japan. (MOST-103-2221-E-167 -011).

[B20]      *Cheng-Chi Wang, Min-Hung Chou, Wen-Cheng Pu and Ying-Che Kuo, 2014, Bifurcation Analysis of Bearing Number in Hybrid Porous Gas-lubricated Bearing System, The 5th Conference on Nonlinear Science and Complexity, August 4-9, Xian, China, pp.56. (MOST-102-2221-E-167 -035).

[B21]      *Cheng-Chi Wang and Her-Terng Yau, 2014, Vibration and Bifurcation Analysis of Ultra Short Aero-lubricated Journal Bearing System, The 16th International Conference on Machine Design and Production, June 30- July 03, Izmir, Turkiye, pp.1-10. (MOST-102-2221-E-167 -035).

[B22]      *Cheng-Chi Wang, Ming-Jyi Jang, Neng-Sheng Pai, 2012, Bifurcation and Nonlinear Dynamic Analysis of Heart Blood Vessel System, 2012 IEEE International Conference on Mechatronics and Automation, August 5-8, Chengdu, China, pp.127-132. (NSC-100-2628-E-269 -016 -MY2). (EI)

[B23]      Chao-Lin Kuo, Lung-Chuan Huang, Shun-Jih Wang, Jui-Sheng Lin, Cheng-Chi Wang and Jun-Juh Yan, 2013, Image Encryption Based on Fuzzy Synchronization of Chaos Systems, 2013 IEEE 37th Annual Computer Software and Applications Conference, July 22-26, Kyoto, Japan, pp.153-154. (NSC-100-2628-E-269 -016 -MY2). (EI)

[B24]      *Cheng-Chi Wang, David T-W Lin and Her-Terng Yau, 2012, Bifurcation Analysis of Trailing Edge Angle for Aeroelastic System, 2012 International Symposium on Computer, Consumer and Control, June 4-6, Taichung, Taiwan, pp.440-443. (NSC-100-2628-E-269 -016 -MY2). (EI)

[B25]      David T-W Lin, Cheng-Fung Shen, Jui-Ching Hsieh, Yuh-Chung Hu, Cheng-Chi Wang and Chi-Chang Wang, 2012, The Design and Fabrication of the Vibration-Induced Energy Harvester on the Heat Pipe Generator, The 1st International Conference of Multi Disciplines of Engineering on Advanced Technology and Environmentalism Design, 6-8 March 2012, Pattaya, Thailand, pp.6-10. (NSC-100-2628-E-269-016-MY2)

[B26]      *Cheng-Chi Wang, Shin-Yong Chen, Ming-Jyi Jang and Te-Tan Liao, 2011, Application of Hybrid Method to the Influence of Bearing Number on Elliptic Gas Bearing System, Proceedings of 2011 International Conference on Fluid Power and Mechatronics, August 18-20, Beijing, China, pp.164-168. (NSC-99-2221-E-269-008). (EI)

[B27]      *Cheng-Chi Wang, Neng-Sheng Pai, Her-Terng Yau, Te-Tan Liao, Ming-Jyi Jang, Chi-Wen Lee and Wen-Ming Hong, 2010, Bifurcation Analysis of Horizontal Platform System, Proceedings of World Academy of Science, Engineering and Technology, Vol. 65, May 26-28,Tokyo, Japan, pp.254-257. (NSC-98-2221-E-269-016). (EI)

[B28]  David T-W Lin, Ha Thi Xuan Chi, Chong-Ching Chang, Cheng-Chi Wang and Chung-Neng Huang, 2010, The Optimal Design Process of the Plate Heat Exchanger, 2010 International Symposium on Computer, Communication, Control and Automation, May 5-7, Tainan, Taiwan, pp.237-240. (EI)

[B29]  *Cheng-Chi Wang, Ya-Yen Chou, Shane-Rong Sheu, Ming-Jyi Jang, Jyun-Syuan Chen and Li-Wen Huang, 2010, Flow Field Analysis of Different Types of Blade and Baffle in a Fermentor, 2010 International Symposium on Computer, Communication, Control and Automation, May 5-7,Tainan, Taiwan, pp.554-557. (NSC-98-2622-E-269-004-CC3). (EI)

[B30]      Shane-Rong Sheu, *Cheng-Chi Wang, Ming-Jyi Jang and Sheng-Yu Chang, 2009, Influence of Ultrasound Extraction Manufacturing Process on Coffee Flavor Concentration, 2009 International Conference on Mechatronic System of Integration and Application, December 4-5, Tainan, Taiwan,  pp.149-154. (NSC-98-2622-E-269-004-CC3

[B31]  *Cheng-Chi Wang, Her-Terng Yau, Yen-Liang Yeh and Ming-Jyi Jang, 2009, Nonlinear Dynamic Analysis of Earthquake Model, 2009 The 2nd International Symposium on Knowledge Acquisition and Modeling, November 29-30, Wuhan, China, pp. 76-79. (NSC-98-2221-E-269-016) (EI)

[B32]  Her-Terng Yau, Cheng-Chi Wang, Neng-Sheng Pai and Ming-Jyi Jang, 2009, Robust Control Method Applied in Self-Balancing Two-Wheeled Robot, 2009 The 2nd International Symposium on Knowledge Acquisition and Modeling, November 29-30, Wuhan, China, pp.268-271. (NSC-98-2221-E-269-016) (EI)

[B33]  *Cheng-Chi Wang, Her-Terng Yau, Chao-Lin Kuo, 2009, Bifurcation and Chaotic Analysis of a Relative Short Spherical Air Bearing System via a Novel Hybrid Method, 2009 International Workshop on Chaos-Fractals Theories and Applications, November 6-8, Shenyang, China, pp. 327-330. (EI)

[B34]  *Cheng-Chi Wang, Her-Terng Yau, Ming-Jyi Jang and Yen-Liang Yeh, 2009, Application of DT Method to Bifurcation Analysis of Microcandilevers with Proportional-Plus-Derivative Control, The 2009 IEEE International Conference on Networking, Sensing and Control. March 26-29, Okayama, Japan, pp.783-788. (NSC-96-2221-E-269-009 & NSC-97-2221-E-269-022) (EI)

[B35]  *Cheng-Chi Wang, Te-Tan Liao, Chen-Feng Kuan and Hsu-Chiang Kuan, 2009, Chaotic Analysis of Gyroscope Control System via Differential Transformation Method, The 2009 IEEE International Conference on Networking, Sensing and Control. March 26-29, Okayama, Japan, pp.528-532. (NSC-96-2221-E-269-009 & NSC-97-2221-E-269-022) (EI)

[B36]  Her-Terng Yau, Cheng-Chi Wang and Yu-Lin Chou, 2009, Design of Sliding Mode Controller for AFM System by Backstepping Design, The 2009 IEEE International Conference on Networking, Sensing and Control. March 26-29, Okayama, Japan, pp.840-845. (NSC-96-2221-E-269-009 & NSC-97-2221-E-269-022) (EI)

[B37]  Ming-Jyi Jang, Shane-Rong Sheu, *Cheng-Chi Wang and Kun-Huei Sung, 2009, Optimization Analysis of the Experimental Parameters on the Extraction Process of Propolis, IAENG International Conference on Control and Automation. March 17-19, Hong Kong, pp. 1295-1299.

[B38]  Shane-Rong Sheu, *Cheng-Chi Wang, Sheng-Yu Chang and Ming-Jyi Jang, 2009, Influence of Extraction Manufacturing Process on Caffeine Concentration, IAENG International Conference on Control and Automation. March 17-19, Hong Kong, pp. 1300-1304.

[B39]  *Cheng-Chi Wang, Her-Terng Yau and Ming-Jyi Jang, 2009, Influence of the Bearing Number on Micro Gas Bearing System, Proceedings of the 4th IEEE International Conference of Nano/Micro Engineered and Molecular Systems, January 5-8, Shenzhen, China, pp.975-979. (NSC-96-2221-E-269-009 & NSC-97-2221-E-269-022) (EI)

[B40]  Her-Terng Yau, Cheng-Chi Wang, Ching-Chang Cho and Ming-Jyi Jang, 2009, Numerical Simulation of an Electrokinetic Micromixer Using Harmonic and Chaotic Electric fields, Proceedings of the 4th IEEE International Conference of Nano/Micro Engineered and Molecular Systems, January 5-8, Shenzhen, China, pp.951-955. (NSC-96-2221-E-269-009 & NSC-97-2221-E-269-022) (EI)

[B41]  *Cheng-Chi Wang, Her-Terng Yau, Chen-Feng Kuan and Jun-Juh Yan, 2008, Application of Hybrid Method to the Quasi-periodic Analysis of Micro Gas Journal Bearing System, 2008 KAM Colloquium on Computer, Communication, Control and Automation, December 21-22, Wuhan, China, pp.79-82. (NSC-96-2221-E-269-009 & NSC-97-2221-E-269-022) (EI)

[B42]  Her-Terng Yau, Cheng-Chi Wang, Chao-Lin Kuo and Ming-Jyi Jang, 2008, Fuzzy Controller Design for Atomic Force Microscope System, 2008 KAM Colloquium on Computer, Communication, Control and Automation, December 21-22, Wuhan, China, pp.83-87. (NSC-96-2221-E-269-009 & NSC-97-2221-E-269-022) (EI)

[B43]  *Cheng-Chi Wang and Her-Terng Yau, 2008, Bifurcation Analysis of High Speed Spindle Air Bearings, Proceedings of 2008 CACS International Automatic Control Conference, Tainan, Taiwan, November 21-23. Paper ID:UA01.4. (NSC-96-2221-E-269-009 & NSC-97-2221-E-269-022)

[B44]  Shane-Rong Sheu, Ming-Jyi Jang, *Cheng-Chi Wang, Chih-Ho Tsai and Yao-Ching Hsueh, 2008, Simulation and Application of Fuzzy Theory for Supercritical Carbon Dioxide Extraction of Green Tea, ASME 2st International Conference on Micro- and Nanosystems, August 3-6, 2008, Brooklyn, New York, US, pp.713-718. (EI)

[B45]  Cheng-Fang Huang, Jui-Sheng Lin, Jun-Juh Yan and Cheng-Chi Wang, 2008, On The Robust Chaos Synchronization of RCLSJ Models, 2008 IEEE Conference on Soft Computing in Industrial Applications, June 25-27, Muroran Hokkaido, Japan, pp.309-312. (EI)

[B46]  *Cheng-Chi Wang, Her-Terng Yau, Yen-Liang Yeh and Ming-Jyi Jang, 2008, Application of DT Method to the Nonlinear Analysis of Microcantilever-Sample Interaction in AFM, Proceedings of the 3rd IEEE International Conference of Nano/Micro Engineered and Molecular Systems, January 6-9, 2008, Sanya, China, pp.45-50. (NSC-95-2221-E-269-016 & NSC-96-2221-E-269-009) (EI)

[B47]  Yen-Liang Yeh, Cheng-Chi Wang and Ming-Jyi Jang, 2008, The Generation and Vibration Analysis of the Complex Self-Power Module, Proceedings of the 3rd IEEE International Conference of Nano/Micro Engineered and Molecular Systems, January 6-9, 2008, Sanya, China, pp. 140-145. (NSC-95-2221-E-269-016 & NSC-96-2221-E-269-009) (EI)

[B48]  Yen-Liang Yeh, Cheng-Chi Wang and Ming-Jyi Jang, 2008, Real-time Measurement of Glucose Concentration Using Position Sensing Detector, Proceedings of the 3rd IEEE International Conference of Nano/Micro Engineered and Molecular Systems, January 6-9, 2008, Sanya, China, pp.561-565. (NSC-95-2221-E-269-016 & NSC-96-2221-E-269-009) (EI)

[B49]  *Cheng-Chi Wang, Her-Terng Yau, Yen-Lian Yeh and Ming-Jyi Jang, 2007, Bifurcation Analysis of a Relative Short Spherical Aerodynamic Journal Bearing System, The 2nd International Symposium on Nonlinear Dynamics, October 27-30, 2007, Shanghai, China. Journal of Physics: Conference Series 96 (2008) 012099. (NSC-96-2221-E-269-009)

[B50]      Her-Terng Yau and Cheng-Chi Wang, 2007, Variable Structure Controller for Modified Projective Synchronization of Chen-Lee Chaotic Systems with Nonlinear Inputs, The 2nd International Symposium on Nonlinear Dynamics, October 27-30, 2007, Shanghai, China. Journal of Physics: Conference Series 96 (2008) 012098. (NSC-96-2221-E-269-009)

[B51]      Yen-Liang Yeh, Cheng-Chi Wang, Ming-Jyi Jang, Yen-Pin Lin and Kuang-Sheng Chen, 2007, Nonlinear Dynamic Response of Cantilever Beam Tip During Atomic Force Microscopy (AFM) Nanolithography of Copper Surface, The 2nd International Symposium on Nonlinear Dynamics, October 27-30, 2007, Shanghai, China. Journal of Physics: Conference Series 96 (2008) 012199. (NSC-96-2221-E-269-009)

[B52]  Her-Terng Yau and *Cheng-Chi Wang, 2007, Synchronization Between Two Different Hyperchaotic Systems Containing Nonlinear Inputs, Asian Simulation Conference 2007, October 10-12, Seoul National University, Seoul, Korea, pp.173-181.

[B53]  Shane-Rong Sheu, Ming-Jyi Jang and *Cheng-Chi Wang, 2007, A Study of Manufacturing Micro-Nano Particles of Green Tea by Rapid Expansion of Supercritical Solutions Method, ASME 1st International Conference on Micro- and Nano-Systems, September 4-7, 2007, Las Vegas, Nevada, pp.687-691. (EI)

[B54]  *Cheng-Chi Wang, Ming-Jyi Jang and Yen-Liang Yeh, 2007, Quasi-Periodic and Subharmonic Analysis of a Spherical Aerodynamic Bearing System, Proceedings of the 16th IASTED International Conference on Applied Simulation and Modelling, August 29-31, 2007, Palma de Mallorca, Spain, pp.73-78. (NSC-95-2221-E-269-016) (EI)

[B55]      *Cheng-Chi Wang, Ming-Jyi Jang, Yen-Liang Yeh and Wen-Rui Wang, 2007, Design and Manufacture of Novel MEMS-based Dielectrophoretic Biochip, Proceedings of the 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2007, January 16-19,Bangkok, Thailand, pp.230-234. (NSC94-2622-E-269-034-CC3) (EI)

[B56]      Yen-Liang Yeh, Ming-Jyi Jang, Cheng-Chi Wang and Wen-Tai Wei, 2007, Design and Fabrication of In-Vitro Electroporation Chip for Gene Transfection, Proceedings of the 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2007, January 16-19,Bangkok, Thailand, pp.294-298. (NSC94-2622-E-269-034-CC3) (EI)

[B57]  Yen-Liang Yeh, Ming-Jyi Jang, Cheng-Chi Wang, Kuang-Sheng Chen and Yen-Pin Lin, 2007, Qualitative Analysis of Surface Energy Using Atomic Force Microscopy Approach, Proceedings of the 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2007, January 16-19,Bangkok, Thailand, pp.303-307. (EI)

[B58]      *Cheng-Chi Wang, Ming-Jyi Jang, Yen-Liang Yeh and Her-Terng Yau, 2006, Numerical Simulation and Bifurcation Analysis of a Rigid Rotor Supported by an Aerodynamic Herringbone Grooved Journal Bearing System, Asian Simulation Conference 2006, October 30-November 1, Tokyo, Japan. (NSC-94-2212-E-269-009)

[B59]      Yen-Liang Yeh, Ming-Jyi Jang and Cheng-Chi Wang, 2006, Nonlinear Analysis of Large Deflections of Isotropic Rectangular Clamped Plate Using Hybrid Method, Asian Simulation Conference 2006, October 30-November 1, Tokyo, Japan. (NSC-94-2212-E-269-009)

[B60]      *Cheng-Chi Wang, Ming-Jyi Jang and Pei-Ling Ko, 2006, A Measurement System for The Phase Retardation of Liquid Crystal Particles Under an Electric Field Effect, Journal of Physics: Conference Series, Vol.48 pp.957–969. (4th International Symposium on Instrumentation Science and Technology, August 8-12, Harbin, China) (NSC93-2622-E-269-034-CC3)

[B61]      Yen-Liang Yeh, Ming-Jyi Jang and Cheng-Chi Wang, 2006, Nonlinear Analysis of Large Deflections of Clamped Orthotropic Rectangular Plate Using Hybrid Method, Proceedings of the 15th IASTED International Conference on Applied Simulation and Modelling, June 26-28, Rhodes, Greece, pp.15-20. (EI)