Canon.com/ijsetup

Canon printer is a peripheral machine which makes a persistent representation of graphics or text, usually on paper.

At the core of all Canon printers are its print heads, full-photolithography inkjet nozzles , printing your images with the high quality you desire.

canon.com/ijsetup the five-ink system gives great quality photo prints and the large touchscreen makes it especially easy to use. The print speed is a little slow, even for an inkjet, but it is well featured with both Bluetooth and Wi-fi connectivity and a handy SD-Card slot at the front.

1. Open a web browser and go to canon.com/ijsetup.

2. Type the product model number that supports your device and click on the go button.

3. Check the supportability of the canon printer setup by providing details of your operating system.

4. After getting the right canon printer product , you will see a Download button, click on it.

5. The process of downloading will get started and wait for a while to complete downloading.

6. Now, the setup file is successfully downloaded.

Follow these steps to install Canon drivers or software for your printer:

• Visit the canon.com/ijsetup support page so we can find the model you have.

• Enter your Canon model in the box. When your model appears at the bottom of the box, click it.

• You will be redirected to the Drivers & Downloads page for the model you searched for in the previous step.

• Select the Drivers, Software, depending on what you want to download.

• If you are setting up your printer for the first time, you have updated your computer operating system, or the printer is unable to communicate with the computer, you will need to download the recommended driver for printing.

• Select the Select button to the right of the software or driver file you want to download. Once you press "Select" the button will change to say "Close".

The set up process is usually the same for most printers:

1. Install the cartridges in the printer and add paper to the tray.

2. Insert installation CD and run the printer set up application (usually "setup.exe"), which will install the printer drivers.

3. Connect your printer to the PC using the USB cable and turn it on.

1. Open a front cover of canon.com/ijsetup

2. Side out the cassette unit you hear a click.

3. Open a paper guides by sliding the right paper guide to the edge .

4. Now lets load the paper.

5. Load A4 or letter size paper with the printing side facing down .

6. Take care not to load the paper past the limit mark on the paper guide.

7. Align the paper guides with the edges of the paper.

8. Don't slide the paper guide in too much or the paper may misfeed

9. Take this steps if you are loading smaller size papers

10. Insert the paper with the printing size facing down, until its touches the far end .

11. Don't load the paper in landscape orientation or the paper might jam .

12. Make sure the load paper doesn't exceed the limit mark on the paper guide.

13. Align the paper guides with the edges of the paper

14. Don't slide the paper guide in too much or the paper may misfeed.

15. Slide the cassette unit you hear a click .

16. Paper information register screen appears . (register the cassette paper OK next )

17. Use the right or left arrow to match the paper size and type pressing OK after each selection .

18. Slide out the paper output support .

19. Then open the output tray extension .

20. The paper loading is now complete .