Brother Printer Support - Fix Your Printer's Print Quality Issues
Brother Printer Support - Fix Your Printer's Print Quality Issues
Usually, whenever a person buys a printer; then its print quality is the first-factor one considers. After all, the purpose of purchasing a printer goes nil if the quality it delivers is ill. There are many competitive brands available in the market. However, the Brother Printers are excellent in work performance, printing quality, and the preferable point, which is the Brother Printer Support.
The Brother Printer Support team is quite helpful and available all the time to assist their clients with solutions.
If you are searching for something to provide you with a solution to work wonders on your Brother Printer's print quality problems, then you may find this article helpful. Here, we will cover Brother Printer's details with some tips to help you fix your printer's quality issues before you connect to the Brother Printer Support team.
Brother Printers contain different capabilities and properties. However, you may encounter some problems with its quality sometimes. Read the details we have provided below to know about them in brief and find the solutions that we have described effectively:
Low-Quality Sheets
Always remember that printing through Brother Printer demands high-quality paper. Whenever you use ill quality papers, they may not take the ink properly. As a result, you face printing issues.
Moreover, the ink or the paper may stick to your printing machine, which can cause paper jams too. Follow the steps we mentioned below to provide you with quality issue Brother Printer Support steps:
We advise the users to test a few sample papers before buying them in bulk quantity from retailers. Doing this will prevent your printer as well as the wastage.
You must use neutral papers for printing rather than using the alkaline papers.
Make sure you use the papers, which should be 75-90 gm2.
The use of rough, dull, wrinkled, or creased papers also results in disgraced printing.
Moreover, do not use the inkjet papers in your Brother Printer. They may harm your machine.
In short, we wish to convey that choosing the right type of paper for printing is of utmost importance. Most of the printing result depends on paper's quality. Hence, do not compromise with the paper quality.
If Your Printer is Printing Faded or Blurry Pages
Sometimes users face dull printing issues with their printers. Such condition hampers the work and also waste their time. If your printer is creating smudges issue, then you may need to connect with the Brother Printer Support experts. However, before you opt for this option, we have some techniques that might be helping or improve your printer's print quality:
To resolve such an issue, we recommend checking the corona wire location tab. For this, first, you will need to turn your machine OFF.
To put it OFF, press and hold the power button for a few seconds.
Then, open the top cover. Lifting its handle will all you need for this.
Now, you have to verify the toner cartridges. For this, we recommend you to match its color to the color label.
Ensure each color slot to be arranged in the proper sequence.
Further, replace the toner cartridge assemblies.
After that, slide the green tab from left to right about 12-15 times. As a result, you will be able to clean the wire inside each drum unit.
Clean all four LED heads using a lint-free cloth. You can also damp the fabric in a small amount of alcohol.
Now, reinstall the drum units and cartridges. Make sure that the toner cartridge's color is the same as the label's color.
Next, cover it with the machine cover and turn the power ON.
Check the printing quality after that.
So, you can resolve the printing issue by cleaning the corona wire tab in your printer. We recommend you to try this method before you contact the Brother Printer Support team.
If the Toner Saver Mode is Turned Off
If the corona wire cleaning does not improve the printing quality, you can use another way to overcome the issue. Here are the stepwise instructions to follow:
Press the 'settings' option from your printer's screen.
Then, push the up and down symbols to go into all settings.
After that, touch the 'all settings' option.
Go to the general setup and press the same.
After that, press the up and down buttons to go to the 'ecology' option, where you will find the Toner Save.
Here, check if it is Off or On. In case it is ON, you have to push it OFF.
Now, go to the home again and check the printing work.
Implementing the steps we have covered in this guide, you will find that your Brother Printer has started printing good quality. In case the problem still remains the same, then you may require to contact the Brother Printer Support team.