We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-25 · 6 min read · Independent comparison
If you want a lightweight everyday pair with a dedicated LED battery readout and active noise cancellation, choose BLXSounds Earbuds; if you need a longer-lasting sports set with ear hooks, a higher waterproof rating and the newer Bluetooth version, choose Matast 2026. Both are budget-friendly true-wireless earbuds built around the same core promise: wireless headphones with ENC mics that keep your voice clear when you're actually using them for calls. The difference is in how they're designed to be worn and how long they're meant to run.
• BLXSounds' biggest strength: a compact 4 g-per-bud in-ear build with dual-sided smart touch controls, active noise cancellation, and an LED display that shows the charge of each earbud plus the case.
• BLXSounds' biggest trade-off: 40 hours total battery and an IP5 water-resistance rating, which is fine for commutes and light outdoor use but less than what the Matast claims.
• Matast 2026's biggest strength: up to 60 hours total playback, an IP7 waterproof nano-coating, flexible 45° ear hooks for a locked-in fit, and Bluetooth 5.4 with a stated 35 ms lower latency than 5.3.
• Matast 2026's biggest trade-off: the ear-hook shape is bulkier and more sport-specific, so it suits workouts better than a discreet everyday look.
• Pick BLXSounds if you want light, low-profile buds for calls, music, and commuting with easy touch controls.
• Pick Matast 2026 if you want maximum runtime and sweat/rain resistance for the gym, running, and long days away from a charger.
The BLXSounds A9 Pro is built around comfort and clarity for people who wear earbuds all day. Each bud weighs just 4 g, and the package includes three sizes of soft silicone tips, so the fit is meant to stay easy over long sessions rather than clamp down for a workout. The audio side uses 13.2 mm dynamic drivers with triple-layer composite diaphragms, tuned for punchy bass and a balanced overall sound.
For calls, this is where the "ENC mic" angle matters. BLXSounds uses four ENC noise-cancelling microphones that are designed to reduce moderate wind noise and cut background chatter so your voice stays clear to the person on the other end. It also lists active noise cancellation as its noise-control mode, which is unusual at this tier and useful on a noisy bus or in an open office.
Battery is rated at 8 hours per charge and up to 40 hours with the case, and a 1-hour charge tops it up. A dedicated LED display shows the level of each earbud and the case, so you're not guessing before you leave the house. With an IP5 rating, it handles dust and rain and is fine for running, cycling and light fitness — but it isn't a swim-or-soak set.
Who should skip it: if you sweat heavily, train outdoors in real weather, or want the longest possible runtime between charges, the Matast's higher IP rating and bigger battery are the better match.
The Matast 2026 (model C16) is aimed squarely at people who move. The headline design change is the flexible 45° ear hook, which wraps around the ear for a secure hold during intense workouts, plus three sizes of ear tips for a customized fit. The shiny black finish and sport-first shape make it feel like gym gear rather than a fashion accessory.
The audio spec is aggressive on paper: a 4-sound-chamber design with 14.2 mm graphene drivers, a stated 18 Hz–25 kHz range and a 30% larger driver claim versus conventional types. In practice that translates to a bass-forward, energetic tuning that fits fitness playlists. For calls, Matast lists four HD ENC microphones, quoting a 75% vocal-clarity boost and an 80% cut in external noise — again, that's the manufacturer's framing, but the four-mic array is the key takeaway for buyers who live on calls.
Connectivity is where Matast pulls ahead on paper: Bluetooth 5.4 with a stated 45% lower power consumption and 35 ms lower latency than 5.3, plus a dual-use mode so you can run one earbud in mono or share the other with someone. Battery is up to 60 hours total with the case, 8 hours per bud, and a 10-minute USB-C fast charge adds about 2 hours. The dual LED digital display shows a 1%–100% percentage while charging. IP7 waterproofing covers sweat, rain and accidental splashes.
Who should skip it: if you want tiny, barely-there buds for all-day desk and commute use, the ear-hook design is more hardware than you need.
• Best for battery life → Matast 2026. Up to 60 hours total versus 40 on the BLXSounds.
• Best for the lightest fit → BLXSounds Earbuds. 4 g per bud and a compact in-ear shape that disappears in your ear.
• Best for workouts and sweat → Matast 2026. IP7 waterproofing and 45° ear hooks beat IP5 and a plain in-ear fit.
• Best for quick top-ups → Matast 2026. A 10-minute charge adds about 2 hours; BLXSounds needs a 1-hour charge.
• Best for battery visibility → a tie, with a nuance. BLXSounds shows per-earbud and case levels; Matast shows a 1%–100% percentage.
• Best for the newest Bluetooth → Matast 2026. Bluetooth 5.4 with lower latency versus BLXSounds' 5.3.
• Best for active noise cancellation → BLXSounds Earbuds. It lists ANC as its noise-control mode, while Matast lists sound isolation.
• Best for sharing audio → Matast 2026. Its mono dual-use mode lets you pass one earbud to a friend.
In my opinion, the Matast 2026 is the stronger pick for most people shopping this category, because the combination of up to 60 hours of playback, IP7 waterproofing, ear-hook stability and Bluetooth 5.4 covers more real-world situations without asking you to compromise. I'd choose the BLXSounds Earbuds only if a featherweight in-ear fit and active noise cancellation matter more to you than runtime and ruggedness. If you're on the fence, weigh how you'll actually wear them: all-day desk and commute calls point to BLXSounds, while gym, running and long trips point to Matast. Check the current price on Amazon for both before you decide.
Yes. Both of these are wireless headphones with built-in microphones and ENC noise cancellation, so they work as a mic for calls and voice chat once paired. BLXSounds uses four ENC mics; Matast uses four HD ENC mics. Neither has a wired jack, so all mic use is over Bluetooth.
Do all Bluetooth headphones have a microphone?
Pair the earbuds to your PC over Bluetooth, then select them as both the output and input device in your sound settings. BLXSounds supports iOS, Android, tablets, PCs and laptops with a stated 15 m range; Matast lists smartphones, TVs, computers and laptops. Both use Bluetooth, so no dongle is required.
Just pair them once and answer calls with the touch controls — both models support call management, including answering and ending calls, directly from the earbuds. BLXSounds adds reject-call and voice-assistant controls; Matast supports play/pause, volume and voice assistant. The ENC mics then handle background noise on your end.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Symphonized Earbuds 3.5mm vs Gaosen 200: Wireless Headphones, Diyeeni Language Translator Earbuds vs PTHTECHUS Open Ear Headphones, Boytond AI Translation Earbuds vs Yechiry Over Ear Headphones