Publications

List of Publications (in peer reviewed international journals)-101

1. D. Sharma, B.K. Satapathy, Optimization and physical performance evaluation of electrospun nanofibrous mats of PLA, PCL and their blends. Journal of Industrial Textiles (2020), p.1528083720944502.

2. S. Sethy, L. Samantara, B. K. Satapathy, Phase selective microstructural effects on rheological networks, segmental relaxation, and electrical conductivity behaviour of melt mixed polyamide 12/polypropylene -multiwall carbon nanotube nanocomposites, Polymer Engineering and Science, (2020), In print.

3. S. Sethy, B. K. Satapathy, Microstructural interpretations on thermo-mechanical relaxation and electrical conductivity of Polyamide 12/polypropylene-MWCNT nanocomposites, Journal of Polymer Research (2020), 27 (4), 1-12.

4. S.K. Samantaray, B. K. Satapathy, Ultra-toughening of Bio-based Polyamide 410, (2020), ACS Omega, 5 (10), 5306-5317.

5. U. Stauddinger, B. K. Satapathy, D. Jehnichen, Nanofiller dispersion, morphology, mechanical behaviour and electrical properties of nanostructured styrene butadiene based triblock copolymer / CNT composites, Polymers (2019), 11 (11), 1831.

6. D. B. Konwar, B. K. Satapathy, J. Jacob, Influence of aliphatic polycarbonate middle block on mechanical and microstructural behaviour of triblock copolymers based on Poly (L-lactide) and polycarbonate, Polymer International (2019) 68, (3), 400-409.

7. Deepika Sharma, B. K. Satapathy, Performance evaluation of electrospun nanofibrous mats of Polylactic acid (PLA)/ Poly (ε- caprolactone) (PCL) blends, Materials Today: Proceedings (2019), 19, 188-195..

8. Debarghya Saha, B. K. Satapathy , Friction Hysteresis and Subsequent Wear Mechanism of Clay- Based Phenolic Composites under Cyclic Load, Materials Today: Proceedings (2019), 19, 196-204.

9. Deepika Sharma, B. K. Satapathy, Mechanical Properties of Aliphatic Polyester‐Based Structurally Engineered Composite Patches, Macromolecular Symposia, (2019), 384 (1) 1800153 (1-16).

10. Dibyendu Das, Sucharita Sethy and B.K. Satapathy ; Matrix tacticity controlled tuning of microstructure, constitutive behavior and rheological percolation effect of melt-mixed amino-functionalized MWCNT/PP nanocomposites, Polymer Engineering & Science, (2018), DOI: 10.1002/pen.24674.

11. H. Chadda, B.K. Satapathy, A. Patnaik, A.R. Ray, Mechanistic interpretations of fracture toughness and correlations to wear behavior of hydroxyapatite and silica/hydroxyapatite filled bis-GMA/TEGDMA micro/hybrid dental restorative composites, Composites Part B: Engineering, 130 (2017) 132-146.

12. S. Kumar, R.K. Kachhap, B.K. Satapathy, A. Patnaik, Wear Performance Forecasting of Chopped Fiber–Reinforced Polymer Composites: A New Approach Using Dimensional Analysis, Tribology Transactions, 60 (5) (2017) 873-880.

13. R.K. Kachhap, B.K. Satapathy, “Cenosphere–Molybdenum Disulfide”–New Filler–Lubricant Combination for Performance Synergism in Composite Friction Materials, Journal of Tribology, 139 (5) (2017) 055001(1-11).

14. S. Shankar Banerjee, I. Ramakrishnan, B.K. Satapathy, Rheological behavior and network dynamics of silica filled vinyl‐terminated polydimethylsiloxane suspensions

Polymer Engineering & Science, 57 (9) (2017) 973-981.

15. D.B. Konwar, S. Sethy, B.K. Satapathy, J. Jacob, Effect of poly (l-lactide) chain length on microstructural and thermo-mechanical properties of poly (l-lactide)-b-poly (butylene carbonate)-b-poly (l-lactide) triblock copolymers, Polymer, 123 (2017) 87-99.

16. R. Lach, B.K. Satapathy, R. Weidisch, W. Grellmann, K. Knoll , Three‐Phase Model of Two‐Component Blends Consisting of a Polystyrene–Polybutadiene Star Block Copolymer and a Polystyrene Homopolymer, Macromolecular Symposia, 373 (1) (2017), DOI: 10.1002/masy.201600158.

17. U. Staudinger, B.K. Satapathy, Influence of Carbon Nanotubes on the Morphology and Properties of Styrene‐Butadiene Based Block Copolymers, Macromolecular Symposia, 373 (1) (2017), DOI: 10.1002/masy.201700030.

18. S. Kumar, S.N. Maiti, B.K. Satapathy, Halloysite Nanotubes Filled in Asymmetric Blend of Polyamide 6, 12/poly (Ethylene‐Octene) Elastomer: Tough‐to‐Brittle Transition in Nanocomposites, Macromolecular Symposia, 373(1) (2017), DOI: 10.1002/masy.201600155.

19. H. Chadda, P.S. Shahar, B.K. Satapathy, A.R. Ray, Filler-immobilization assisted designing of hydroxyapatite and silica/hydroxyapatite filled acrylate based dental restorative composites: Comparative evaluation of quasi-static and dynamic mechanical properties, Journal of Polymer Research, 23 (9) (2016) 197(1-13).

20. D.B. Konwar, J. Jacob, B.K. Satapathy, A comparative study of poly (l‐lactide)‐block‐poly (ϵ‐caprolactone) six‐armed star diblock copolymers and polylactide/poly (ϵ‐caprolactone) blends, Polymer International, 65 (9) (2016)1107-1117.

21. H. Chadda, S.V. Naveen, S. Mohan, B.K. Satapathy, A.R. Ray, Kamarul,Cytotoxic evaluation of hydroxyapatite-filled and silica/hydroxyapatite-filled acrylate-based restorative composite resins: An in vitro study, The Journal of prosthetic dentistry, 116 (1) (2016)129-135.

22. S.S. Banerjee, I. Ramakrishnan, B.K. Satapathy, Modification of polydimethylsiloxane with polyvinylpyrrolidone: Influence of reinforcing filler on physico‐mechanical properties, Polymer Engineering & Science, 56 (5) (2016) 491-499.

23. H.S. Jaggi, S. Kumar, D. Das, B.K. Satapathy, A.R. Ray, Morphological correlations to mechanical performance of hydroxyapatite‐filled HDPE/UHMWPE composites,

Journal of Applied Polymer Science, 132 (1) (2015), 41251 (1-10).

24. S. Kumar, S.N. Maiti, B.K. Satapathy, Super-toughening polyamide-612 by controlling dispersed phase domain size: Essential work of fracture assessment, Materials & Design, (1980-2015), 62 (2014) 382-391.

25. D. Das, B.K. Satapathy, Microstructure-rheological percolation-mechanical properties correlation of melt-processed polypropylene-multiwall carbon nanotube nanocomposites: Influence of matrix tacticity combination, Materials Chemistry and Physics, 147 (1) (2014) 127-140.

26. H.S. Jaggi, B.K. Satapathy, A.R. Ray, Viscoelastic properties correlations to morphological and mechanical response of HDPE/UHMWPE blends, Journal of Polymer Research , 21 (8) (2014) 482 (1-13).

27. R.K. Kachhap, B.K. Satapathy, Synergistic effect of tungsten disulfide and cenosphere combination on braking performance of composite friction materials, Materials & Design, 56 (2014) 368-378.

28. S. Dhamaniya, H.S. Jaggi, M. Nimiya, S. Sharma, B.K. Satapathy, J. Jacob, Synthesis, Characterization and Biodegradation Studies of Chain‐Coupled Polyesters Based on Tartaric Acid, Polymer International, 63 (4) (2014) 680-688.

29. N. Dayma, H.S. Jaggi, S. Kumar, D. Das, B.K. Satapathy, Time‐Dependent Crack‐Growth and Isochronous Strain Field Analysis of Polyamide‐6/Polypropylene‐Grafted‐Maleic Anhydride/Nanoclay Ternary Nanocomposites, Macromolecular Materials and Engineering, 299 (3) (2014) 296-306.

30. D. Das, B.K. Satapathy, Designing tough and fracture resistant polypropylene/multi wall carbon nanotubes nanocomposites by controlling stereo-complexity and dispersion morphology, Materials & Design, 54 (2014) 712-726.

31. A. Tiwari, H.S. Jaggi, R.K. Kachhap, B.K. Satapathy, S.N. Maiti, B.S. Tomar, Comparative performance assessment of cenosphere and barium sulphate based friction composites, Wear, 309 (2014) 259-268.

32. S. Bandyopadhyay, R. Iyer, R. Majumder, B. Satapathy, A.K. Ghosh, Studies on Wear Properties of Polystyrene in the Presence of Fibrillated Network of Polytetrafluoroethylene, ISRN Polymer Science, 2013 (2013), DOI: 10.1155/2013/837952.

33. S. Basu, M. Singhi, B.K. Satapathy, M. Fahim, Dielectric, electrical, and rheological characterization of graphene‐filled polystyrene nanocomposites, Polymer Composites, 34 (12), (2013) 2082-2093.

34. M. Bindu, B.K. Satapathy, H.S. Jaggi, A.R. Ray, Size-scale effects of silica on bis-GMA/TEGDMA based nanohybrid dental restorative composites, Composites Part B: Engineering, 53 (2013) 92-102.

35. T. Singh, A. Patnaik, B. Satapathy, B. Tomar, Development and Optimization of Hybrid Friction Materials Consisting of Nanoclay and Carbon Nanotubes by using Analytical Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) under Fuzzy Atmosphere, Walailak Journal of Science and Technology (WJST), 10 (2013) 343-362.

36. T. Singh, A. Patnaik, B.K. Satapathy, Thermo-mechanical characterization of nano filled and fiber reinforced brake friction materials, AIP Conference Proceedings, 1536 (2013) 259-260.

37. T. Singh, A. Patnaik, B.K. Satapathy, M. Kumar, B.S. Tomar, Effect of Nanoclay Reinforcement on the Friction Braking Performance of Hybrid Phenolic Friction Composites, Journal of materials engineering and performance, 22 (2013) 796-805.

38. T. Singh, A. Patnaik, B.K. Satapathy, Friction braking performance of nanofilled hybrid fiber reinforced phenolic composites: influence of nanoclay and carbon nanotubes, Nano, (2013).

39. N. Dayma, H.S. Jaggi, B.K. Satapathy, Post-yield crack toughness behavior of polyamide-6/polypropylene grafted maleic anhydride/nanoclay ternary nanocomposites, Materials & Design, 49 (2013) 303-310.

40. N. Dayma, S. Kumar, D. Das, B.K. Satapathy, Melt-mixed PA-6/LDPE-g-MA/nanoclay ternary nanocomposite: Micro-mechanisms from post-yield fracture kinetics and strain field analysis, Materials Chemistry and Physics, 142 (2013) 640-650.

41. H.S. Jaggi, B.K. Satapathy, A. Patnaik, N.C. Mehra, B.S. Tomar, Temperature dependence of friction and wear performance and thermomechanical response of flyash-filled brake composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 227 (2013) 373-384.

42. H.S. Jaggi, A. Tiwari, B.K. Satapathy, A. Patnaik, Dynamic mechanical response and fade–recovery performance of friction composites: effect of flyash and resin combination, Journal of Reinforced Plastics and Composites, 32 (2013) 835-845.

43. S. Kumar, B.K. Satapathy, S.N. Maiti, Correlation of morphological parameters and mechanical performance of polyamide‐612/poly (ethylene–octene) elastomer blends, Polymers for Advanced Technologies, 24 (5) (2013) 511-519.

44. N. Dayma, H.S. Jaggi, B.K. Satapathy, Post-yield fracture behaviour of PA-6/LDPE-g-MA/nanoclay ternary nanocomposites: semiductile-to-ductile transition, Journal of Polymer Research, 19 (2012) 1-11.

45. S. Dhamaniya, D. Das, B.K. Satapathy, J. Jacob, Influence of block composition on structural, thermal, and mechanical properties of novel aliphatic polyester based triblock copolymers, Polymer, 53 (21) (2012) 4662-4671.

46. S. Kumar, B.K. Satapathy, A. Patnaik, Thermo-mechanical correlations to erosion performance of short glass/carbon fiber reinforced vinyl ester resin hybrid composites, Computational Materials Science, 60 (2012) 250-260.

47. M. Kumar, B.K. Satapathy, A. Patnaik, D.K. Kolluri, B.S. Tomar, Evaluation of fade‐recovery performance of hybrid friction composites based on ternary combination of ceramic‐fibers, ceramic‐whiskers, and aramid‐fibers, Journal of Applied Polymer Science, 124 (2012) 3650-3661.

48. N. Dayma, D. Das, B.K. Satapathy, Kinetic and structural interpretations of post-yield crack resistance behavior of polyamide-6/polyolefin-g-maleic anhydride blends, Journal of Materials Science, 47 (2012) 4860-4875.

49. B.K. Satapathy, A. Patnaik, N. Dadkar, P. Rath, B.S. Tomar, Investigations on friction-fade and friction-recovery performance of phenolic composites based on fly ash–graphite combinations for braking applications, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 226 (2012) 439-450.

50. H.S. Jaggi, Y. Kumar, B.K. Satapathy, A.R. Ray, A. Patnaik, Analytical interpretations of structural and mechanical response of high density polyethylene/hydroxyapatite bio-composites, Materials & Design, 36 (2012) 757-766.

51. T.G. Mamatha, A. Patnaik, S. Biswas, B.K. Satapathy, A.K. Redhewall, Thermo-mechanical and crack position on stress intensity factor in particle-reinforced Zinc–aluminium alloy composites, Computational Materials Science, 55 (2012) 100-112.

52. S. Tejyan, A. Patnaik, A. Rawal, B.K. Satapathy, Structural and mechanical properties of needle-punched nonwoven reinforced composites in erosive environment, Journal of Applied Polymer Science, 123 (2012) 1698-1707.

53. N. Dayma, B.K. Satapathy, Microstructural correlations to micromechanical properties of polyamide-6/low density polyethylene-grafted-maleic anhydride/nanoclay ternary nanocomposites, Materials & Design, 33 (2012) 510-522.

54. T. Singh, A. Patnaik, B.K. Satapathy, M. Kumar, Performance analysis of organic friction composite materials based on carbon nanotubes-organic-inorganic fibrous reinforcement using hybrid ahp-ftopsis approach, Composites: Mechanics, Computations, Applications, An International Journal, 3 (2012) 189-214.

55. T. Singh, A. Patnaik, B.K. Satapathy, Effect of Carbon Nanotubes on Tribo-Performance of Brake Friction Materials, AIP Conf. Proc., 1393 (2011) 223-224.

56. S. Kumar, B. Satapathy, A. Patnaik, Viscoelastic interpretations of erosion performance of short aramid fibre reinforced vinyl ester resin composites, Journal of Materials Science, 46 (2011) 7489-7500.

57. B.K. Satapathy, A. Majumdar, H.S. Jaggi, A. Patnaik, B.S. Tomar, Targeted material design of flyash filled composites for friction braking application by non-linear regression optimization technique, Computational Materials Science, 50 (2011) 3145-3152.

58. B.K. Satapathy, A. Patnaik, N. Dadkar, D.K. Kolluri, B.S. Tomar, Influence of vermiculite on performance of flyash-based fibre-reinforced hybrid composites as friction materials, Materials & Design, 32 (2011) 4354-4361.

59. N. Dayma, B.K. Satapathy, A. Patnaik, Structural correlations to sliding wear performance of PA-6/PP-g-MA/nanoclay ternary nanocomposites, Wear, 271 (2011) 827-836.

60. M. Kumar, B.K. Satapathy, A. Patnaik, D.K. Kolluri, B.S. Tomar, Hybrid composite friction materials reinforced with combination of potassium titanate whiskers and aramid fibre: Assessment of fade and recovery performance, Tribology International, 44 (2011) 359-367.

61. S. Kumar, B.K. Satapathy, A. Patnaik, Thermo-mechanical correlations to erosion performance of short carbon fibre reinforced vinyl ester resin composites, Materials & Design, 32 (2011) 2260-2268.

62. A. Das, B.K. Satapathy, Structural, thermal, mechanical and dynamic mechanical properties of cenosphere filled polypropylene composites, Materials & Design, 32 (2011) 1477-1484.

63. B. Satapathy, A. Das, A. Patnaik, Ductile-to-brittle transition in cenosphere-filled polypropylene composites, Journal of Materials Science, 46 (2011) 1963-1974.

64. N. Dayma, B.K. Satapathy, Morphological interpretations and micromechanical properties of polyamide-6/polypropylene-grafted-maleic anhydride/nanoclay ternary nanocomposites, Materials & Design, 31 (2010) 4693-4703.

65. A. Patnaik, M. Kumar, B.K. Satapathy, B.S. Tomar, Performance sensitivity of hybrid phenolic composites in friction braking: Effect of ceramic and aramid fibre combination, Wear, 269 (2010) 891-899.

66. B.K. Satapathy, A. Majumdar, B.S. Tomar, Optimal design of flyash filled composite friction materials using combined Analytical Hierarchy Process and Technique for Order Preference by Similarity to Ideal Solutions approach, Materials & Design, 31 (2010) 1937-1944.

67. N. Dadkar, B.S. Tomar, B.K. Satapathy, A. Patnaik, Performance assessment of hybrid composite friction materials based on flyash–rock fibre combination, Materials & Design, 31 (2010) 723-731.

68. A. Patnaik, M. Abdulla, A. Satapathy, S. Biswas, B.K. Satapathy, A study on a possible correlation between thermal conductivity and wear resistance of particulate filled polymer composites, Materials & Design, 31 (2010) 837-849.

69. M. Ganß, B.K. Satapathy, M. Thunga, R. Weidisch, K. Knoll, Molecular-Weight-Controlled Brittle-to-Semiductile-to-Ductile Transition in S-(S/B)-S Triblock Copolymers, Macromolecular Materials and Engineering, 295 (2010) 178-188.

70. B.K. Satapathy, M. Ganss, P. Poetschke, R. Weidisch, Stress transfer and fracture mechanisms in carbon nanotube-reinforced polymer nanocomposites, Optimization of Polymer Nanocomposite Properties, (2010) 139-172.

71. N. Dadkar, B.S. Tomar, B.K. Satapathy, Evaluation of flyash-filled and aramid fibre reinforced hybrid polymer matrix composites (PMC) for friction braking applications, Materials & Design, 30 (2009) 4369-4376.

72. M. Ganß, B.K. Satapathy, M. Thunga, U. Staudinger, R. Weidisch, D. Jehnichen, J. Hempel, M. Rettenmayr, A. Garcia-Marcos, H.H. Goertz, Morphology and mechanical response of S–B star block copolymer – Layered silicate nanocomposites, European Polymer Journal, 45 (2009) 2549-2563.

73. M. Thunga, B.K. Satapathy, R. Weidisch, M. Stamm, J.U. Sommer, K. Knoll, Influence of chain architecture on phase behaviour of styrene-(styrene/butadiene)-styrene triblock copolymers and their binary blends, European Polymer Journal, 45 (2009) 537-549.

74. U. Staudinger, B.K. Satapathy, R. Weidisch, Influence of block composition on crack toughness behaviour of styrene-b–(styrene-random-butadiene)–b-styrene triblock copolymers, European Polymer Journal, 44 (2008) 1822-1833.

75. M. Thunga, B.K. Satapathy, U. Staudinger, R. Weidisch, M. Abdel-Goad, A. Janke, K. Knoll, Dynamic mechanical and rheological properties of binary S–(S/B)–S triblock copolymer blends, Journal of Polymer Science Part B: Polymer Physics, 46 (2008) 329-343.

76. M. Ganß, B.K. Satapathy, M. Thunga, R. Weidisch, P. Pötschke, D. Jehnichen, Structural interpretations of deformation and fracture behavior of polypropylene/multi-walled carbon nanotube composites, Acta Materialia, 56 (2008) 2247-2261.

77. U. Staudinger, B. Satapathy, M. Thunga, R. Lach, R. Weidisch, K. Knoll, Influence of phase miscibility and morphology on crack resistance behaviour and kinetics of crack propagation of nanostructured binary styrene–(styrene/butadiene)–styrene triblock copolymer blends, Acta Materialia, 55 (2007) 5844-5858.

78. M. Ganß, B.K. Satapathy, M. Thunga, R. Weidisch, P. Pötschke, A. Janke, Temperature dependence of creep behavior of PP–MWNT nanocomposites, Macromolecular Rapid Communications, 28 (2007) 1624-1633.

79. U. Staudinger, B.K. Satapathy, M. Thunga, R. Weidisch, A. Janke, K. Knoll, Enhancement of mechanical properties of triblock copolymers by random copolymer middle blocks, European Polymer Journal, 43 (2007) 2750-2758.

80. D. Kolluri, B. Satapathy, J. Bijwe, A. Ghosh, Analysis of load and temperature dependence of tribo-performance of graphite filled phenolic composites, Materials Science and Engineering: A, 456 (2007) 162-169.

81. B.K. Satapathy, R. Weidisch, P. Pötschke, A. Janke, Tough-to-brittle transition in multiwalled carbon nanotube (MWNT)/polycarbonate nanocomposites, Composites Science and Technology, 67 (2007) 867-879.

82. B.K. Satapathy, M. Ganß, R. Weidisch, P. Pötschke, D. Jehnichen, T. Keller, K.D. Jandt, Ductile‐to‐Semiductile Transition in PP‐MWNT Nanocomposites, Macromolecular Rapid Communications, 28 (2007) 834-841.

83. B. Satapathy, R. Lach, R. Weidisch, K. Schneider, A. Janke, K. Knoll, Morphology and crack toughness behaviour of nanostructured block copolymer/homopolymer blends, Engineering Fracture Mechanics, 73 (2006) 2399-2412.

84. B.K. Satapathy, U. Staudinger, M. Thunga, R. Lach, R. Weidisch, Influence of Phase Miscibility on the Crack Propagation Kinetics of Nanostructured Binary S‐(S/B)‐S Triblock Copolymer Blends, Macromolecular Rapid Communications, 27 (2006) 1814-1820.

85. B.K. Satapathy, J. Bijwe, Composite friction materials based on organic fibres: sensitivity of friction and wear to operating variables, Composites Part A: Applied Science and Manufacturing, 37 (2006) 1557-1567.

86. M. Thunga, U. Staudinger, B. Satapathy, R. Weidisch, M. Abdel‐Goad, A. Janke, K. Knoll, Influence of molecular architecture of S–S/B–S triblock copolymers on rheological properties, Journal of Polymer Science Part B: Polymer Physics, 44 (2006) 2776-2788.

87. F. Costa, B. Satapathy, U. Wagenknecht, R. Weidisch, G. Heinrich, Morphology and fracture behaviour of polyethylene/Mg–Al layered double hydroxide (LDH) nanocomposites, European Polymer Journal, 42 (2006) 2140-2152.

88. B. Satapathy, J. Bijwe, N. Majumdar, Influence of modified phenolic resins on the fade and recovery properties of the friction materials: Supportive evidence multiple criteria decision-making method (MCDM), Journal of Reinforced Plastics and Composites, 25 (2006) 1333-1340.

89. B. Satapathy, J. Bijwe, D. Kolluri, Assessment of fiber contribution to friction material performance using grey relational analysis (GRA), Journal of Composite Materials, 40 (2006) 483-501.

90. B.K. Satapathy, U. Staudinger, R. Weidisch, R. Lach, A. Janke, K. Knoll, Strain field analysis and kinetics of crack propagation of binary triblock copolymer blends, Macromolecular rapid communications, 27 (2006) 266-273.

91. A. Janke, K. Schneider, K. Knoll, R. Weidisch, B. Satapathy, R. Lach, Morphology and crack toughness behaviour of nanostructured block copolymer/homopolymer blends, Engineering Fracture Mechanics, (2006) 2399-2412.

92. J. Bijwe, N. Majumdar, B. Satapathy, Influence of modified phenolic resins on the fade and recovery behavior of friction materials, Wear, 259 (2005) 1068-1078.

93. B.K. Satapathy, R. Weidisch, P. Pötschke, A. Janke, Crack toughness behaviour of multiwalled carbon nanotube (MWNT)/polycarbonate nanocomposites, Macromolecular Rapid Communications, 26 (2005) 1246-1252.

94. B. Satapathy, J. Bijwe, Influence of operating parameters on the performance of friction composites based on combinations of rock fibers and organic fibers, Journal of Reinforced Plastics and Composites, 24 (2005) 579-595.

95. B. Satapathy, J. Bijwe, Fade and recovery behavior of non-asbestos organic (NAO) composite friction materials based on combinations of rock fibers and organic fibers, Journal of Reinforced Plastics and Composites, 24 (2005) 563-577.

96. B. Satapathy, J. Bijwe, Performance of friction materials based on variation in nature of organic fibres: Part II. Optimisation by balancing and ranking using multiple criteria decision model (MCDM), Wear, 257 (2004) 585-589.

97. B. Satapathy, J. Bijwe, Performance of friction materials based on variation in nature of organic fibres: Part I. Fade and recovery behaviour, Wear, 257 (2004) 573-584.

98. J. Bijwe, S. Awtade, B. Satapathy, A. Ghosh, Influence of concentration of aramid fabric on abrasive wear performance of polyethersulfone composites, Tribology Letters, 17 (2004) 187-194.

99. B.K. Satapathy, J. Bijwe, Wear data analysis of friction materials to investigate the simultaneous influence of operating parameters and compositions, Wear, 256 (2004) 797-804.

100. B.K. Satapathy, J. Bijwe, Analysis of simultaneous influence of operating variables on abrasive wear of phenolic composites, Wear, 253 (2002) 787-794.

101. J. Bijwe, J. Indumathi, B.K. Satapathy, A.K. Ghosh, Influence of carbon fabric on fretting wear performance of polyetherimide composite, ASME, Journal of Tribology, 124 (2002) 834-839.

Presentations/abstracts in International conferences -34

1. K. Goswami, I. Ramakrishnan, B.K. Satapathy, Effect of fumed silica incorporation in mechanical, rheological, properties of poly (dimethylsiloxane)-poly (vinylpyrrolidone) semi interpenetrating networks (PDMS-PVP semi IPN), Abstracts of Papers of The American Chemical Society, Amer Chemical Soc 1155 16th St, Nw, Washington, Dc 20036 USA, 2012.

2. Sandeep Kumar, Bhabani K. Satapathy, Amar Patnaik, Erosive wear analysis of randomly oriented intimately mixed short-glass/carbon fiber-hybrid composites ,European Symposium on Friction, Wear, Wear Protection and Related Areas 2011, October 26-28, Karlsruhe, Germany.

3. Naresh Dayma, Bhabani K. Satapathy, Morphology and fracture behavior of nanoclay filled impact modified PA-6 ternary nanocomposites Eurofillers 2011, Dresden, Germany, August 21-25, 2011.

4. Martin Ganß, Bhabani K. Satapathy, Mahendra Thunga, Roland Weidisch, Petra Pötschke, Andreas Janke, Dieter Jehnichen, Deformation and fracture behaviour of PP-MWNT nanocomposites, Nanocomposites 2008, Sept 15-17, 2008, San Diego, CF, USA.

5. M.Thunga, B. K. Satapathy, U. Staudinger, R. Weidisch, K. Knoll, Influence of molecular weight on physical and mechanical properties of linear symmetric S-(S/B)-S triblock copolymers, PPS-24, June 15-19, 2008, Salerno, Italy.

6. B. K. Satapathy*, M. Ganß, R. Weidisch, P. Pötschke, Morphology and crack resistance behaviour of PP-MWNT nanocomposites, Intl. Symposium on Functional Polymer Based Materials (PBM-Symposium), 3-4 April 2007, Friedrich Schiller University, Jena, Germany .

7. M. Thunga, U. Staudinger, B. K. Satapathy, R. Weidisch, M. Stamm, K. Knoll, Rheology and phase behaviour of triblock copolymer blends PBM Symposium, Friedrich- Schiller-University, Jena , Germany, 3-4 April 2007.

8. M. Ganß, B. K. Satapathy, M. Thunga, R. Weidisch, P. Pötschke, A. Janke, D. Jehnichen, Creep Behaviour of PP-MWNT nanocomposites, PBM Symposium, Friedrich- Schiller-University, Jena , Germany, 3-4 April 2007.

9. M. Ganß, B. K. Satapathy, M. Thunga, R. Weidisch, P. Pötschke, D. Jehnichen, A. Janke, Deformations- und Bruchverhalten von PP-MWNT Nanokompositen, 11. Problem- Seminar Deformations- und Bruchverhalten von Kunststoffen, Merseburg, Germany, June-2007.

10. R. Weidisch, M. Ganss, B. Satapathy, P. Poetschke, D. Jehnichen, A. Janke, Morphology and crack toughness behaviour of PP-MWNT nanocomposites, Bulletin of the American Physical Society, 52 (2007).

11. U. Staudinger, B. K. Satapathy, R. Weidisch, R. Lach, K. Knoll, Rissausbreitungsverhalten und Dehnungsfeld Entwicklung in Nanostructurierten S-SB-S-Triblock Copolymer Blends, Thringen Werkstoff Tag Polymere in Thringen, Friedrich Schiller Universitat Jena, Oct-2006, Page: 114-119, Verlag Dr. K�ster, Berlin, ISBN 978-3-89574-606-2.

12. M. Ganß, B. K. Satapathy, R. Weidisch, P. Pötschke,, D. Jehnichen, T. Keller, K. D. Jandt, Untersuchungen zur Rissausbreitung in Multiwalled Carbon nanotube / Polypropylen Kompositen Thüringen Werkstofftag Polymere in Thüringen, Friedrich Schiller Universitat Jena, Oct-2006, Page: 79-84, Verlag Dr. Kster, Berlin, ISBN 978-3-89574-606-2

13. M. Thunga, U. Staudinger, B. K. Satapathy, R. Weidisch, A. Janke, K. Knoll, Correlation Between Morphology, Rheology and Dynamic Mechanical Properties of Binary Triblock Copolymer Blends Polymerwerkstoffe 2006 (P-2006) from 27 - 29 Sept. 2006 in Halle-Saale, Martin-Luther-Universitat Halle-Wittenberg, Germany.

14. U. Staudinger ,B. K. Satapathy, R. Weidisch, R. Lach, A. Janke, K. Knoll, Crack Propagation behaviour and strain field developement in nanostructuredS-S/B-S-Triblock Copolymer Blends Polymerwerkstoffe 2006 (P-2006) from 27 - 29 Sept. 2006 in Halle-Saale, Martin-Luther-Universitat Halle-Wittenberg, Germany.

15. M. Ganß, U. Staudinger, M. Thunga, B. K. Satapathy, R. Weidisch, R. Lach, A. Janke, K. Knoll, Influence of Processing on the Morphology and Mechanical Properties of Binary S-S/B-S Triblock Copolymer Blends Polymerwerkstoffe 2006 (P-2006) from 27 - 29 Sept. 2006 in Halle-Saale, Martin-Luther-Universitat Halle-Wittenberg, Germany.

16. M. Thunga, U. Staudinger, B. K. Satapathy, R. Weidisch, K. Knoll , Influence of molecular weight on rheological properties of linear symmetric S-(S/B)-S triblock copolymers, Deutsche Physikalische Gesellschaft (DPG) Meeting, European Physical Society, 26-31 March 2006, Dresden, Germany.

17. U. Staudinger ,B. K. Satapathy, R. Weidisch, A. Janke, K. Knoll Architectural influence on deformation and fracture properties of S-S/B-S triblock copolymers Deutsche Physikalische Gesellschaft (DPG) Meeting, European Physical Society, 26-31 March 2006, Dresden, Germany.

18. U. Staudinger, B. K. Satapathy, R. Weidisch, K. Reincke, R. Lach, K. Knoll, Correlation between microhardness evolution and strain field analysis during crack propagation of binary triblock copolymer belnds, 13th Intl. Conference on Deformation, Yield and Fracture of Polymers, 10-13 April 2006, Rolduc Abbey, Kerkrade, The Netherlands.

19. B. K. Satapathy, R. Weidisch, P. Pötschke, A. Janke, Crack toughness behaviour of multi walled carbon nanotube (MWNT) / polycarbonate nanocomposites, World Polymer Congress - MACRO 2006, 41st Intl. Symposium on Macromolecules, 16-21st July 2006, Rio de Janeiro, , Brazil.

20. M. Thunga, U. Staudinger, B. K. Satapathy, R. Weidisch, K. Knoll Influence of molecular weight on rheological properties of linear symmetric S-(S/B)-S triblock copolymers, World Polymer Congress- MACRO 2006, 41st Intl. Symposium on Macromolecules, 16-21st July 2006, Rio de Janeiro, , Brazil.

21. B. K. Satapathy, R. Weidisch, P. Pötschke, A. Janke Tough-to-brittle transition in multiwalled carbon nanotube (MWNT) / polycarbonate nanocomposites International Conference on Carbon Nanotube (CNT)- Polymer Composites, September 4-7, 2005, Technische Universitt Hamburg-Harburg, Germany. (received the poster award).

22. U. Staudinger, B. K. Satapathy, M. Abdel-Goad, R. Weidisch, A. Janke, K. Knoll, Correlation between molecular architecture and fracture behaviour of S-S/S-B triblock copolymers, 10th Problem Seminar on Deformation and Fracture Behaviour of Polymeric Materials,15-17June 2005, IPW, Merseburg, Germany.

23. U. Staudinger, M. Abdel-Goad, B. K. Satapathy, M. Thunga, R. Weidisch, A. Janke, K. Knoll, Influence of molecular architecture of S-S/S-B triblock copolymers on morphology and rheological properties, 21st Annual Meeting of the Polymer Processing Society (PPS-21), 19-23 June, 2005, Leipzig, Germany.

24. B. K. Satapathy, R. Weidisch, P. Pötschke, A. Janke, Crack toughness behaviour of multi walled carbon nanotube (MWNT) / polycarbonate nanocomposites, 8th European Symposium on Polymer Blends and Euro Fillers 2005, 9-12 May, 2005, Bruges, Belgium .

25. U. Staudinger, R. Weidisch, B. K. Satapathy, A. Janke, M. Abdel-Goad, K. Knoll, Influence of molecular architecture on morphology and fracture behaviour of binary triblock copolymers, 1st International symposium on Nanostructured and Functional Polymer Based Materials and Composites (Nanofunpoly 2005), 24-27 April, Dresden, Germany .

26. B. K. Satapathy, R. Weidisch, P. Pötschke , A. Janke, Influence of carbon nanotubes on the crack behaviour of polycarbonate based polymer nanocomposites 1st International symposium on Nanostructured and Functional Polymer Based Materials and Composites (Nanofunpoly 2005), 24-27 April, Dresden, Germany.

27. B. K. Satapathy, U. Staudinger, M.Abdel-Goad, M. Thunga, R. Weidisch, R. Lach, K. Knoll, Correlation between morphology, rheological properties and fracture behaviour of binary triblock copolymer blends, 21st Annual Meeting of the Polymer Processing Society (PPS-21), 19-23 June, 2005, Leipzig, Germany.

28. B. K. Satapathy, R. Lach. R. Weidisch, A. Janke and K. Knoll, Morphology and crack toughness behaviour of nanostructured block copolymer/homopolymer blends, 4th Intl. Conf. on Fracture of Polymers, Composites and Adhesives- (4th ESIS TC4), 11-14th Sept 2005. Les Diablerets, Geneva, Switzerland .

29. J.Bijwe, Nidhi and B. K. Satapathy, Influence of Modified Phenolic Resins on the Fade and Recovery Behaviour of Friction Materials, 15th Intl. Conf. on Wear of Material (WOM), Apr 24-28, 2005, San Diego, USA.

30. R. Weidisch, U. Staudinger, B. K. Satapathy, R. Lach, W. Grellmann and K. Knoll, Fracture Behaviour of Binary Block Copolymer Blends, 11th Intl. Conf. on Fracture (ICF)-2005,Turin, Italy.

31. U. Staudinger, B. K. Satapathy, R. Weidisch, R. Lach, K. Knoll, Influence of Morphology on Fracture Behaviour of Binary Triblock Copolymer Blends, 6th IPF colloquium on Advanced Heterogeneous Polymer Materials from 18th-19th November 2004, Institute for Polymer Research (IPF), Dresden, Germany.

32. B. K. Satapathy, R. Lach, R. Weidisch, K. Schneider, A. Janke, K. Knoll, Crack Toughness Behaviour of Asymmetric Star Block Copolymer / Homopolymer Blends, 6th IPF colloquium on Advanced Heterogeneous Polymer Materials from 18th-19th November 2004, Institute for Polymer Research (IPF), Dresden, Germany.

33. U. Staudinger, B. K. Satapathy, R. Weidisch, R. Lach, K. Knoll, Morphology and Fracture Behaviour of Binary Triblock Copolymer Blends, Polymerwerkstoffe 2004 (P-2004) from 29 Sept.-1 Oct 2004 in Halle-Saale, Martin-Luther-Universitt Halle-Wittenberg, Germany.

34. B. K. Satapathy, R. Lach, R. Weidisch, K. Schneider, A. Janke, K. Knoll, Micro Structural Interpretation of Fracture Behaviour of Block Copolymer / Homopolymer Blends, Polymerwerkstoffe 2004 (P-2004) from 29 Sept.-1 Oct 2004 in Halle-Saale, Martin-Luther-Universitt Halle-Wittenberg, Germany.

Presentations/ abstracts in conferences held in India- 19

1. D. Das, B. K. Satapathy, Tacticity induced influence on fracture toughness of PP/MWNT Nanocomposites, 4th International Conference on Recent Advance in Composites Materials (ICRACM-2013), International Center, Goa, India, February, 18-21, 2013.

2. D. Das, B. K. Satapathy, Rheological, Morphological and Fracture Toughness Behavior of MWNT Reinforced Stereo-Complex Polypropylene Nano composites, 3rd FAPS Polymer Congress and Macro 2013,Bangalore, India, May 15-18, 2013

3. R. K. Kachhap and B. K. Satapathy,Dynamic Mechanical Response and Tribological Performance of Phenolic Composites: “Combinatorial Effect of Cenosphere and Tungsten disulphide”, 3rd FAPS Polymer Congress and Macro 2013,Bangalore, India, May 15-18, 2013.

4. S. Kumar, B. K. Satapathy and S. N. Maiti, Morphological, Rheological and Thermal Properties of Polyamide-612/ Poly(ethylene-octene-elastomer) Blend, 3rd FAPS Polymer Congress and Macro 2013,Bangalore, India, May 15-18, 2013.

5. S. Kumar, B. K. Satapathy and S. N. Maiti, Structural, Mechanical and Dynamic Mechanical Analysis of Polyamide-612/POE-g-MA/Halloysite Nanotubes ternary Nanocomposites, 7th International Conference on Materials for Advanced Technologies (ICMAT 2013), Suntec,Singapore, 2013.

6. Harjeet S. Jaggi, Bhabani K. Satapathy, N. C. Mehra, B. S. Tomar, A. Patnaik, Thermo-mechanical and tribological performance of flyash based glass fibre reinforced hybrid composite friction materials International Conference on Electron Nanoscopy, EMSI, 6-8 July 2011.

7. Sandeep Kumar, Bhabani K. Satapathy and Amar Patnaik. Erosive performance of Kevlar fiber reinforced vinyl ester resin composites. International conference on advancements in polymeric materials (APM-2010) 2010, Feb.20-22, CIPET Bhubaneswar Orissa, India.

8. Sandeep Kumar, Bhabani K. Satapathy and Amar Patnaik, Analysis of Influencing Variables for solid particle erosive wear of aramid fiber reinforced vinyl ester resin composites, National conference on advances in polymer science and technology (APST-2010) 2010, October 22-24, NIT Hamirpur, Himachal Pradash, India.

9. Naresh Dayma, Bhabani K. Satapathy, Comparative study of PA-6/PP-g-MA/nanoclay and PA-6/LDPE-g-MA/nanoclay composites: Morphology and mechanical properties PSE 2010, Punjab University (Chandigarh)

10. Naresh Dayma, Bhabani K. Satapathy, Nanoclay reinforced composites from PA-6/LDPE-g-MA blends: processing, morphology and mechanical properties APST 2010, NIT Hamirpur.

11. Naresh Dayma, Bhabani K. Satapathy Mechanical and morphological properties of nanoclay filled impact modified polyamide-6 ternary nanocomposites Proceeding of APM-2010 conference, CIPET Bhubaneswar (Orissa)

12. Naresh Dayma, Bhabani K. Satapathy, Morphology of impact modified polyamide-6/nanoclay composites, Proceeding of APA conference-2009, Delhi, December-2009.

13. Naresh Dayma, Bhabani K. Satapathy, Mechanical properties of impact modified PA-6/nanoclay filled nanocomposites, Annual meeting of Polymer Processing Society (PPS-25 Goa), March 2009.

14. B. K. Satapathy, Martin Ganss, Roland Weidisch, A. Marcos, K. Knoll, Morphology and fracture behavior of star block copolymer-monmorillonite nanocomposites Annual meeting of Polymer Processing Society (PPS-25 Goa), March 2009.

15. B. K. Satapathy, and J. Bijwe Performance analysis of asbestos free friction materials based on organic fibres and their combinations with rock fibres, Intl. Workshop on Advances in Asbestos free Friction Composites-I (IWAAFC-I), 5th-6th Jan 2006, ITMMEC, Indian Institute of Technology, Delhi, India.

16. B. K. Satapathy, M. Ganss, R. Weidisch, P. Pötschke, Structural interpretations of deformation and fracture behaviour of PP-MWNT nanocomposites, Asian Polymer Association (APA) Conference, 2008, New Delhi.

17. J Bijwe, S Awtade, B K Satapathy and A K Ghosh, Development of Aramid-Polyethersulfone Composites for Enhanced Abrasive Wear Resistance, Advances in Materials and Processes for Industrial Applications. Sept. 2003 Pune, India.

18. B. K. Satapathy, J. Indumathi, J. Bijwe and A.K. Ghosh, "Role of carbon fibres as solid lubricants and reinforcement in fretting wear of Polyetherimide composite", 12th LAWPSP Symposium, IIT, Mumbai, 400076, India, SOL.02.1-SOL.02.4, 2001.

19. B. K. Satapathy, J.Bijwe and N. C. Mehra, "Worn surface analysis of Phenolic Composites using SEM", 24th EMSI Conference, Feb.9-11, 2001, Chandigarh, India.

Book Chapter

1. B. K. Satapathy, M. Ganss, P. Poetschke, R. Weidisch, Stress transfer and fracture mechanisms in carbon nanotube reinforced polymer nanocomposites, Chapter-7, in Optimization of Polymer Nanocomposite Properties, Ed. Mittal V., 2010, Wiley-VCH Verlag GmbH and Co. KGaA, Germany, ISBN:978-3-527-325314.