研討會論文

國內研討會 Domestic Conference Papers

1. Wu JL, Chen JK, Hsieh MK, Tai CL* “Biomechanical Evaluation of Screw Loosening Induced by Pedicle Fracture Utilizing Synthetic Lumbar Vertebrae” 「第19屆台塑企業應用技術研討會」,Chang Gung University, Taoyuan, Taiwan, June 14, 2024.

2. Jiang HX, Syu YJ, Hsieh MK, Tai CL* “Biomechanical Assessment of a Novel Double-Threaded Pedicle Screw to Enhance Its Applicability in Revision Surgery for Screw Loosening” 「第19屆台塑企業應用技術研討會」,Chang Gung University, Taoyuan, Taiwan, June 14, 2024.

3. Wu JL, Chen JK, Hsieh MK, Tai CL* “Biomechanical Assessment Using Synthetic Lumbar Vertebrae for Managing Pedicle Screw Loosening Caused by Pedicle Fractures” Annual Symposium of Taiwanese Society of Biomedical Engineering (TSBME 2023), Chung Yuan Christian University, Taoyuan, Taiwan, Nov. 11~12, 2023.

4. Jiang HX, Syu YJ, Hsieh MK, Tai CL* “Biomechanical Evaluation of Innovative Dual-Threaded Pedicle Screws to Improve Their Effectiveness in Managing Screw Loosening in Revision Surgeries” Annual Symposium of Taiwanese Society of Biomedical Engineering (TSBME 2023), Chung Yuan Christian University, Taoyuan, Taiwan, Nov. 11~12, 2023. (Best Poster Competition Excellent Award)

5. Tai CL, Hsu CL, Jiang HX, Hsu JL, Kao HK “Biomechanical Evaluation of Novel Expansive DHS Screws for Treatment of Osteoporotic Unstable Intertrochanteric Fractures - The Effects of Screw Design and Cement Augmentation” Annual Symposium of Taiwanese Society of Biomedical Engineering (TSBME 2023), Chung Yuan Christian University, Taoyuan, Taiwan, Nov. 11~12, 2023.

6. Lin YC, Lin YC, Lee DM, Tai CL*, Hsieh MK “Biomechanical Study of Effect of Rod Reduction on Pedicle Screw Fixation Strength in Long-Segment Lumbar Spine” 2023 Annual Conf. of Taiwanese Society of Biomechanics, National Yang Ming Chiao Tung Univ., Taiwan, R.O.C. (Oct. 13, 2023). (Best Oral Paper Award)

7. Wu JL, Lee DM, Hsieh MK, Tai CL* “Biomechanical Study of Intermediate Pedicle Screw Loosening During Spinal Posterior Fixation: Investigation of Preservation and Removal” 2023 Annual Conf. of Taiwanese Society of Biomechanics, National Yang Ming Chiao Tung Univ., Taiwan, R.O.C. (Oct. 13, 2023). (Best Oral Paper Award)

8. Jiang HX, Syu YJ, Lee DM, Hsieh MK, Tai CL* “Biomechanical Assessment of Novel Dual-Threaded Pedicle Screws for Enhancing Applicability in Revision of Screw Loosening” 2023 Annual Conf. of Taiwanese Society of Biomechanics, National Yang Ming Chiao Tung Univ., Taiwan, R.O.C. (Oct. 13, 2023). (Best Oral Paper Award)

9. Lin GY, Peng CC, Hsieh MK, Tai CL* “Biomechanical comparison of screw anchorage power in anterior lateral vertebral screw fixation- effects of screw position and bicortical fixation” 46th National Conference on Theoretical and Applied Mechanics, CTAM 2022. National Kaohsiung University of Science and Technology, Taiwan, R.O.C. (Nov. 18, 2022).

10. Tai CL*, Hsu CL, Liu MY, Kao HK “Biomechanical Evaluation of Novel Expansive DHS Screws for Treatment of Osteoporotic Unstable Intertrochanteric Fractures - The Effects of Screw Design and Cement Augmentation” 2022 Annual Conf. of Taiwanese Society of Biomechanics, - Annual Report of Ministry of Science and Technology, I-Sho Univ., Taiwan, R.O.C. (Oct. 28, 2022).

11. Lin YC, Syu YJ, Lee DM, Hsieh MK, Tai CL* “Biomechanical Study on Effects of Geometric Shape and Thread Profile of Pedicle Screw on Screw Fixation Strength” 2022 Annual Conf. of Taiwanese Society of Biomechanics, I-Sho Univ., Taiwan, R.O.C. (Oct. 28, 2022). (Best Oral Paper Award)

12. Tai CL*, Hsu CL, Kao HK “Biomechanical Evaluation of Novel Expansive DHS Screws for Treatment of Osteoporotic Unstable Intertrochanteric Fractures - The Effects of Screw Design and Cement Augmentation” 2021 Annual Meeting of Taiwanese Society of Biomedical Engineering (TSBME 2021)- Annual Report of Ministry of Science and Technology, National Chung Hsing University, Taiwan (Nov. 19-20, 2021) 

13. Tai CL*, Li YC, Liu MY, Lai PL “Biomechanical Study of Revision Screw Strategies for Failed Pedicle Screw Fixation” 2021 Annual Meeting of Taiwanese Society of Biomedical Engineering (TSBME 2021)- Annual Report of Ministry of Science and Technology, National Chung Hsing University, Taiwan (Nov. 19-20, 2021) 

14. Hsu YJ, Hsu CL, Kao HK, Tai CL* “Biomechanical Study of Novel Dynamic Hip Screws Systems for Enhancement of Screw Fixation Strength” 2021 Annual Conf. of Taiwanese Society of Biomechanics, National Taiwan University, Taiwan, R.O.C. (Oct. 16, 2021) 

15. Peng CC, Kuo JH, Hsieh PH, Tai CL* “Finite Element Analysis of Novel Polyaxial Locking Acetabular Reinforcement Device for Acetabular Reconstruction” 2021 Annual Conf. of Taiwanese Society of Biomechanics, National Taiwan University, Taiwan, R.O.C. (Oct. 16, 2021). (Best Poster Paper Award)

16. Hsu CL, Li YC, Liu MY, Tai CL* “Biomechanical comparison of novel and conventional cement augmentation techniques for failed pedicle screw” 2020 Annual Conf. of Taiwanese Society of Biomechanics, Chang Gung Memorial Hospital, Linko, Taiwan, R.O.C. (Oct. 17, 2020). (Best Poster Paper Award) 

17. Kuo JH, Mao CY, Kao HK, Liu MY, Tai CL* “Finite Element Analysis of A Novel External Fixation Device for Treatment of Pediatric Supracondylar Humeral Fractures” 2020 Annual Conf. of Taiwanese Society of Biomechanics, Chang Gung Memorial Hospital, Linko, Taiwan, R.O.C. (Oct. 17, 2020) 

18. Liu MY, Tsai TT, Lai PL, Hsieh MK, Chen, LH, Tai CL* “Biomechanical Comparison of Pedicle Screw Fixation Strength in Synthetic Bones: Effects of Screw Shape, Core/Thread Profile and Cement Augmentation” 2020 Annual Conf. of Taiwanese Society of Biomechanics, Chang Gung Memorial Hospital, Linko, Taiwan, R.O.C. (Oct. 17, 2020). (Best Poster Paper Award) 

19. Liu MY, Lai PL, Tsai TT, Tai CL” “Biomechanical Comparison of Pedicle Screws Stability Using Different Screw Trajectory” 3rd Global Conference on Biomedical Engineering, 2018 GCBME) Chun Yuan Univ. Taiwan (Nov. 30- Dec. 2, 2018).

20. Mao CY, Lin YJ, Lai PL, Tai CL “Biomechanical comparison of salvaging pedicle screw with different biomaterials” 42nd conference on Theoretical and Applied Mechanics, Taipei University of Technology. (Nov., 23-24, 2018).

21. Chen LH, Liu MY, Lai L, Tsai TT, Tai CL* “Effects of Pedicle Screw Design and Bone Quality On Screw Fixation Strength: An Experimental Study Using Synthetic Bone” Asia Pacific Spine Surgery in Taiwan (APSS 2018), Taiwan Hospital, Taiwan, R.O.C. (June. 8-9, 2018).

22. Liu MY, Lee YC, Chen LH, Lai PL, Tai CL* “Enhancement of PMMA Bone Cement Properties for Improving Applicability and Safety in Vertebroplasty” 34th International Conference of the Polymer Processing Society (PPS-34), Taipei, Taiwan, R.O.C. (May 21-25, 2018).

23. Liu MY, Chen LH, Lai PL, Tsai TT, Tai CL* “Biomechanical study of dual-threaded pedicle screws for improvement of screw anchoring power” 2017 Annual Symposium on Biomedical Engineering and Technology, National Central Univ., Taiwan, R.O.C. (Nov. 17-18, 2017). (Best Oral Paper Award)

24. Lin HT, Lin YC, Lai PL, Tsai TT, Tai CL* ”Strategy for Salvage Pedicle Screw: Comparison of Screw Pullout Strength Using Different Biomaterials Augmentation” 2017 Annual Conf. of the Taiwanese Society of Biomechanics, Taiwan University of Technology, Taiwan, R.O.C. (Oct. 14, 2017). (Best Oral Paper Award)

25. Chien HY, Wei YT, Lee SH, Chen HH, Tai CL* ”Biomechanical Assessment of Various Fixation Techniques for Treatment of Periprosthetic Femoral Fracture Following THA” 2017 Annual Conf. of the Taiwanese Society of Biomechanics, Taiwan University of Technology, Taiwan, R.O.C. (Oct. 14, 2017). (Best Poster Paper Award)

26. Liu MY, Chen LH, Lai PL, Tai CL* “A Preliminary Study of Dual-Threaded Pedicle Screws in Lumbar Spine Instrumentation” 2017 International Conference on Biomechanics, Rehabilitation Engineering and Assistive Technology, Penhu University of Science and Technology, Taiwan, R.O.C. (April 14-15, 2017). (Best Oral Paper Award)

27. Huang HF, Chen SC, Ho FY, Hsieh PH, Lee SH, Tai CL* “Biomechanical Evaluation of A Novel Modular Locking Cage System in Acetabular Reconstruction” 2017 International Conference on Biomechanics, Rehabilitation Engineering and Assistive Technology, Penhu University of Science and Technology, Taiwan, R.O.C. (April 14-15, 2017).

28. Lin YC, Lai PL, Tai CL* “Biomechanical comparison of salvaging pedicle screw with different biomaterials” 2017 International Conference on Biomechanics, Rehabilitation Engineering and Assistive Technology, Penhu University of Science and Technology, Taiwan, R.O.C. (April 14-15, 2017).

29. Tai CL*, Chang HP, Lee SS “Biomechanical Study of Novel Expansive Dynamic Hip Screw” 2016 Annual Conf. of the Taiwanese Society of Biomechanics, China Medical Univ., Taiwan, R.O.C. (Oct. 29, 2016).

30. Huang HF, Ting KY, Tai CL* “The Optimal Mixing Ratio of Polymethylmethacrylate (PMMA) and Polycaprolactone (PCL) for Vertebroplasty” 2016 Annual Conf. of the Taiwanese Society of Biomechanics, China Medical Univ., Taiwan, R.O.C. (Oct. 29, 2016).

31. Lin YC, Lin CX, Chen LH, Tai CL* “Biomechanical Comparison of Pedicle Screw Fixation Strength: Effects of Screw Geometry, Pilot Hole Preparation and Bone Quality” 2016 Annual Conf. of the Taiwanese Society of Biomechanics, China Medical Univ., Taiwan, R.O.C. (Oct. 29, 2016). (Best Oral Paper Award)

32. Wei YT, Liao PY, Wu CC, Tai CL* “Biomechanical Study for Treatment of Ipsilateral Femoral Neck and Shaft Fractures Using Intramedullary Nail” XIV International Symposium on 3D Analysis of Human Movement (3D-AHM 2016) Taipei, Taiwan, R.O.C. (July 18-21, 2016).

33. Hsiao WL, Peng WY, Chen JM, Yeh WL, Tai CL* “Biomechanical Study of Novel Fixation Plates for Treatment of Periprosthetic Fracture Following Total Hip Arthroplasty” 2015 Symposium on Biomedical Engineering and Technology, Taiwan Univ., Taiwan, R.O.C. (Dec. 13-14, 2015).

34. Ting KY, Chen YT, Lai PL, Tai CL* “The Optimization of Mixing Ratio of PMMA And Hydroapatite” 2015 Symposium on Biomedical Engineering and Technology, Taiwan Univ., Taiwan, R.O.C. (Dec. 13-14, 2015).

35. Lin CX, Chen YL, Chen LH, Tai CL* “Improvement of Biomechanical Performance of Expansive Pedicle Screws in Severe Osteoporosis” 2015 Annual Conf. of the Taiwanese Society of Biomechanics, I-Sho Univ., Taiwan, R.O.C. (Oct. 16, 2015).  (Best Oral Paper Award)

36. Chen LL, Liao PY, Tai CL* “Biomechanical Study for Treatment of Ipsilateral Femoral Neck and Shaft Fractures Using Intramedullary Nail” 2015 Annual Conf. of the Taiwanese Society of Biomechanics, I-Sho Univ., Taiwan, R.O.C. (Oct. 16, 2015).

37. Tai CL*, Shiao WL, Hsieh PH “Liquid Gentamicin- Vancomycin Combination Offers A More Cost-Effective Regimen In Bone Cement As Local Antibiotic Delivery System” Biomaterials International 2015, Kenting, Taiwan. (June 1-5, 2015).

38. Chen YL, Chen LH, Tai CL* “Biomechanical Comparison of Expandable Pedicle Screws in Severe Osteoporosis– Effects of Screw Design and Cement Augmentation” 2014 International Scientific Meeting on Biomechanics (2014 ISMB), National Taiwan Univ., Taiwan. (Nov. 21-23, 2014).

39. Peng WY, Yeh WL, Chen JM, Tai CL* “Biomechanical comparison of various plate fixation methods in treatment of periprosthetic fracture following total hip arthroplasty”. 2014 International Scientific Meeting on Biomechanics (2014 ISMB), National Taiwan Univ., Taiwan. (Nov. 21-23, 2014).

40. Chen YL, Lee YC, Chen LH, Tai CL* “Preparation of low-modulus PMMA bone cement for vertebroplasty” 2014 Asian Workshop on Polymer Processing (2014 AWPP), Kenting, Taiwan (Nov. 17-19, 2014).

41. Liao PI, Tsai SL, Hsieh PH, Tai CL* “Lowering polymerization temperature enhances the release of antibiotic from PMMA bone cement” 2014 Asian Workshop on Polymer Processing (2014 AWPP), Kenting, Taiwan (Nov. 17-19, 2014).

42. Liao PI, Liang WH, Lai PL, Tai CL* “Facet stabilization for lumbar posterior stability- facet screw versus facet spacer” (IXth Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2014), National Cheng-Kung Univ., Taiwan. (Oct. 10-12, 2014).

43. Tai CL*, Chen SY “Temperature Control of Bone Cement for Enhancing Applicability and Safety in Vertebroplasty” (IXth Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2014), National Cheng-Kung Univ., Taiwan. (Oct. 10-12, 2014).

44. Liu MY, Chang HP, Lee MS, Tai CL* “The Study of Dynamic Hip Screw with Expandable Blade to Improve the Fixation Strength in Treatment of Intertrochanteric Fracture with Osteoporosis” 2013 Annual Conf. of the Taiwanese Society of Biomechanics, Hua Lien, Taiwan, R.O.C. (Nov. 18-19, 2013).

45. Sun JC, Chen YC, Hsieh PH, Tai CL* “Effect of Femoral Head Necrotic Lesion Size and Implant Orientation on Performance of Mechanical Behavior in Hip Resurfacing” 2013 Symposium on Biomedical Engineering and Technology, National Tsing-Hua Univ., Taiwan, R.O.C. (Nov. 15-16, 2013).

46. Chen YT, Chen SY, Lai PL, Tai CL* “The Control of Environment Temperature of PMMA Bone Cement for Vertebroplasty” 2013 Symposium on Biomedical Engineering and Technology, National Tsing-Hua Univ., Taiwan, R.O.C. (Nov. 15-16, 2013).

47. Li PY, Lai PL, Tai CL* “Biomechanical Comparison among Facet Spacer, Facet Screw, Pedicle Screw and Interspinous Process Fixator for Lumbar Posterior Stability” 2012 Annual Conf. of the Taiwanese Society of Biomechanics, National Yang-Ming Univ., Taiwan, R.O.C. (Nov. 23-24, 2012).  (Third Place, Poster Paper Award)

48. Chen SY, Lai PL, Tai CL* “Hypothermic manipulation of bone cement can extend the handling time during vertebroplasty” 2012 Annual Conf. of the Taiwanese Society of Biomechanics, National Yang-Ming Univ., Taiwan, R.O.C. (Nov. 23-24, 2012).

49. Liu MY, Lee YC, Chen LH, Tai CL* “Low-Modulus PMMA Bone Cement Modified with Castor Oil for Vertebroplasty” 2012 Annual Conf. of the Taiwanese Society of Biomechanics, National Yang-Ming Univ., Taiwan, R.O.C. (Nov. 23-24, 2012).

50. Bai SH, Lee PC, Hsieh PH, Tai CL* “Biomechanical Study for Treatment of Unstable Trochanteric Fractures with Osteoporotic Bone- Comparison between a PMMA Cemented DHS and an Intramedullary Device.” 2012 Annual Symposium on Biomedical Engineering and Technology, Chung-Yung Christian Univ., Taiwan, R.O.C. (Nov. 17-18, 2012).

51. Chang HP, Lee MS, Wu TS, Tai CL* “The Development of Newly Designed Expandable Spinal Implant in Treatment of Vertebral Compression Fracture” 2012 Annual Symposium on Biomedical Engineering and Technology, Chung-Yung Christian Univ., Taiwan, R.O.C. (Nov. 17-18, 2012).

52. Lang WH, Lai PL, Tai CL*, Wei HW, Chen LH, Chen WJ “Biomechanical Comparison of Facet Spacer Implantation and Facet Screw Fixation” 2012 Annual Conf. of Taiwan Spine Society, Chang Gung Memorial Hospital, Linko, Taiwan, (Mar. 17, 2012).

53. Chi CL, Hsieh PH, Tai CL* “The Effects of Femoral Component Malalignment on the Biomechanical Performance in Resurfacing Hip Arthroplasty” 2011 Annual Conf. of the Taiwanese Society of Biomechanics, National Chiao-Tung Univ., Taiwan, R.O.C. (Oct. 20-21, 2011).

54. Chen WH, Lai PL, Chen LH, Tai CL* “A parametric study of pedicle screw design on bone/screw interface strength and bending strength” 2011 Annual Conf. of the Taiwanese Society of Biomechanics, National Chiao-Tung Univ., Taiwan, R.O.C. (Oct. 20-21, 2011).

55. Chen WH, Tai CL*, Lee YC, Lai PL, Chen LH “Pedicle Screws Pullout Strength in Severe osteoporosis- Comparison Among Various Cementing Techniques” 2011 Annual Conf. of Taiwan Society of Minimal Invasive Spine Surgery (TSMISS), I-Sho Hospital., Taiwan, R.O.C. (Oct. 2, 2011).  

56. Lee MS, Chen WJ, Tai CL, Lee DM, Wu JJ, Wu CH, Yu ZD, Lee HY “Development of Expandable Implant with Structural Support to the Bone Tissue” 2011 Symposium on Biomedical Engineering, National Cheng-Kung Univ., Taiwan, R.O.C. (Aug. 19-20, 2011).

57. Lee YC, Chen LH, Lai PL, Tai CL* “Biomechanical Evaluation in Vertebroplasty by Control of Mechanical Properties of PMMA Bone Cement” 2011 Symposium on Biomedical Engineering, National Cheng-Kung Univ., Taiwan, R.O.C. (Aug. 19-20, 2011).  (Best Oral Paper Award))

58. Lee YC, Chen LH, Lai PL, Tai CL* “Pullout Strength of Pedicle Screws with Cement Augmentation in Severe osteoporosis: A Comparative Study between Cannulated Screws with Cement Injection and Solid Screws with Cement Pre-Filling” 2010 Symposium on Biomedical Engineering, I-Sho Univ., Taiwan, R.O.C. (Dec. 10-11, 2010).

59. Chen WH, Tsai SL, Hsieh PH, Tai CL* “The Elution Characteristics of Vancomycin from Bone Cement” 2010 Symposium on Biomedical Engineering, I-Sho Univ., Taiwan, R.O.C. (Dec. 10-11, 2010).

60. 4Chi CL, Shih YT, Chen SH, Tai CL* “Biomechanical Comparison among Anatomic Locking Plate, Traditional and Spiral Blade Retrograde Intramedullary Nail in Treatment of Periprosthetic Femur Fracture Following Total Knee Arthroplasty” Annual Conf. of the Taiwanese Society of Biomechanics, National Cheng-Kung Univ., Taiwan, R.O.C. (Oct. 29, 2010).

61. Lu CC, Wu CC, Tai CL* “Biomechanical Comparison for Unstable Femoral Supracondylar Fractures Treated with Retrograde, Traditional Femoral or Tibial Locked Nails” Annual Conf. of the Taiwanese Society of Biomechanics, National Cheng-Kung Univ., Taiwan, R.O.C. (Oct. 29, 2010).

62. Tai CL, Hsieh PH, Chen WP “Thermal damage potential during hip resurfacing arthroplasty in necrosis of femoral head” Annual Conference of the Biomedical Engineering Society, Yang Ming Univ., Dec., 11~12, 2009.  

63. Shih YT, Tai CL*, Wu CC “Reconstruction interlocking nails for ipsilateral femoral neck and shaft fractures: biomechanical analysis of effect of supplementary cannulated screw on intracapsular femoral neck fracture” Annual Conference of the Biomedical Engineering Society, Yang Ming Univ., Dec., 11~12, 2009.

64. Nien NY, Tai CL*, Lai PL, Chen LH, Chen WJ “Potential Thermal Injury during Vertebroplasty” Annual Meeting of Taiwan Spine Society, Taipei Veterans General Hospital, Taiwan. (March 13~15, 2009)

65. Tai CL, Lin CL, Wang HW, Hsieh PH “The Biomechanical Study of A Modified Periacetabular Osteotomy” Annual Conference of the Biomedical Engineering Society, Chang Gung Univ., Dec., 12~13, 2008.

66. Shih YT, Tai CL*, Lai PL, Chen LH, Chen WJ “Biomechanical Evaluation of Lumbar Spine Instability between Laminectomy and Laminotomy after Spinal Decompressive Procedure” Annual Conference of the Biomedical Engineering Society, Chang Gung Univ., Dec., 12~13, 2008.

67. Tsai SL, Tai CL*, Hsieh PH, “Liquid Gentamicin and Vancomycin in Bone Cement: A laboratory study of a Potentially More Cost-Effective Regimen” Annual Conference of the Biomedical Engineering Society, Chang Gung Univ., Dec., 12~13, 2008.

68. Nien NY, Tai CL*, Lai PL, Chen LH, Chen WJ “Thermal Damage Potential During Vertebroplasty in Treatment of Fractured Vertebrae” Annual Conference of the Biomedical Engineering Society, Chang Gung Univ., Dec., 12~13, 2008.

69. Tai CL, Chen LH, Lai PL, Chen WJ “Biomechanical Comparison of Pullout Strength for Cannulated Pedicle Screws in Severely Osteoporotic Bone: The Role of Radial Hole and Pilot-Hole Tapping” 55th Annual Conf. of Taiwan Orthopaedic Society, Chang Gung Univ., Oct., 25~26, 2008.

70. Nien NY, Tai CL*, Lai PL, Chen LH, Chen WJ “A Study of Temperature Profile of Vertebroplasty” 55th Annual Conf. of Taiwan Orthopaedic Society, Chang Gung Univ., Oct., 25~26, 2008.

71. Tsai SL, Tai CL*, Hsieh PH, Ueng SW “Liquid Gentamicin Enhances the Elution of Vancomycin from Polymethylmethacrylate Bone Cement Spacers: Evaluation of a Potentially More Cost-effective Regimen” 55th Annual Conf. of Taiwan Orthopaedic Society, Chang Gung Univ., Oct., 25~26, 2008.

72. Hsieh PH, Tai CL, Hu CC, Chen DW, Chang YH, Lee Mel S, Shih HN “Thermal Damage Potential during Resurfacing Hip Arthroplasty in Osteonecrosis of the Femoral Head” 55th Annual Conf. of Taiwan Orthopaedic Society, Chang Gung Univ., Oct., 25~26, 2008.

73. Hsieh PH, Tai CL, Hu CC, Chen DW, Chang YH, Lee Mel S, Shih HN “Liquid Gentamicin in Bone Cement Spacers: In Vivo Antibiotic Release and Systemic Safety in Two-stage Revision of Infected Hip Arthroplasty” 55th Annual Conf. of Taiwan Orthopaedic Society, Chang Gung Univ., Oct., 25~26, 2008.

74. Shu CS, Tai CL, Lee MS, Chen WP “The effect of malalignment of knee prosthesis on the stress distribution and wear depth of polyethylene following total knee arthroplasty” Annual Conference of the Biomedical Engineering Society, Feng Chia Univ., Taiwan, R.O.C. (Dec. 14-15, 2007).

75. Tai CL, Hsieh PH, Chang YH, Lee MS, Shih CH “The influence of temperature on microstructure and mechanical strength at cement-prosthesis interface” Annual Conf. of the Taiwanese Society of Biomechanics,, National Cheng-Kung Univ., Taiwan, R.O.C. (Dec. 9, 2006).  

76. Shu CS, Lee MS, Tai CL, Chen WP “The effect of malalignment of knee prosthesis on the stability of postoperatively knee joint” Annual Conf. of the Taiwanese Society of Biomechanics,, National Cheng-Kung Univ., Taiwan, R.O.C. (Dec. 9, 2006).

77. Hung SW, Lee MS, Tai CL, Chen WP “The influence of femoral neck offset and extent of distal fixation of femoral stem on the stability of postoperative femur in THA revision” Annual Conf. of the Taiwanese Society of Biomechanics,, National Cheng-Kung Univ., Taiwan, R.O.C. (Dec. 9, 2006).

78. Hsieh PH, Tai CL, Chang YH, Lee Mel S, Shih HN, Shih CH “Pre-cooling of the Femoral Canal Enhances the Shear Strength at the Cement-prosthesis Interface and Reduces the Polymerization Temperature” Annual Conference of Taiwan Orthopaedic Association, Taipei, Taiwan, R.O.C. (Oct. 28-29, 2006).

79. Tai CL, Lai PL, Chen WP “The Role of Posterior Tension Band Mechanism on Lumbar Spine Instability after Decompressive Procedure for Spinal Stenosis Syndrome -A Biomechanical Study in Porcine Model” Annual Conference of the Biomedical Engineering Society, Chung Yuan Christian Univ., Taiwan, R.O.C. (Dec. 17-18, 2005).  

80. Tai CL, Chen WP, Lee Mel S, Chen WJ, 應邀國科會主辦"生物與醫療科技研發成果推廣發表會"演講: The Development of a Newly Designed Angle-Adjustable Dynamic Hip Screw for Intertrochanteric Osteotomy, 高雄義大醫院, (Jan, 26, 2005)  

81. Tai CL, Chen WP, Lee Mel S, Gao FC, Liao FS “Biomechanical Study in the Optimization of Different Fixation Modes for a Proximal Femoral L-Osteotomy” Annual Conference of the Biomedical Engineering Society, National Cheng-Kung Univ., Taiwan, R.O.C. (Dec. 17, 2004).  

82. Chen WJ, Tai CL, Lai PL, Tsai CT “The Effect of Sagittal Alignment on Instability of the Adjacent Lumbar Segments After Lumbar Fusion–A Biomechanical Study of Lumbar Vertebra in Porcine Model” Annual Conf. of the Taiwanese Society of Biomechanics, Academia Sinica, Taipei, Taiwan, R.O.C. (Dec., 10, 2002).

83. Chen CY, Lee Mel S, Tai CL “The Biomechanical Study of A Modified Intertrochanteric Valgus Osteotomy” Annual Conf. of the Orthopaedic Research Society (ORS) R.O.C., Mackay Memorial Hospital, Taiwan, R.O.C., Oct., 25~27, 2002.

84. Lee Mel S, Shih CH, Cheu LI, Tai. CL, Weng, WN, Ho SH, Chen WP “ Computer-assisted Preoperative Planning for Proximal Femoral Osteotomy Annual Conference of the Orthopaedic Research Society R.O.C., Oct. 15-17, (2001)

85. Chang YH, Liu MC, Chen WP, Lee Mel S, Shih CH, Tai CL, Ueng, WN, Chen CY, Yen LZ, Hung SH, Chao EK, Yang WI, Shieh PS” Biomechanical Study of Multiple Screws and Dynamic Hip Screw Fixation on Sugioka Osteotomy” Annual Conference of the Orthopaedic Research Society R.O.C., Oct. 15-17, (2001)

86. Huang TJ, Tai CL, Hsu RWW “Triangulation of Anterior Vertebral Double-Screw Fixation-A Biomechanical Study” Annual Conference of the Orthopaedic Research Society R.O.C., Oct. 15-17, (2001)

87. Shih CH, Tai CL, Lee Mel S, Chen WP, Lee PC, Hsieh PH “Comparative Biomechanical Studies Between Newly Designed Stemless Prosthesis and Conventional Prosthesis” Annual Conference of the Orthopaedic Research Society R.O.C., Oct. 15-17, (2001)

88. Liang LL, Chen WP, Tai CL “Finite element analysis of unlocked and locked intramedullary nails in the treatment of mid-femoral shaft fracture” Annual Conference of the Biomedical Engineering Society, Chungli, Taiwan, (2001).

89. Huo SH, Chen WP, Lee Mel S, Tai CL, Shih CH “Preoperative planning of proximal femoral osteotomy.” Annual Symposium of the Biomedical Engineering Society, Taiwan, R.O.C. (2000)

90. Hsieh SJ, Chang YW, Chen WP, Tai CL “Finite element analysis of two cervical spinal implants” Annual Conf. of the Taiwanese Society of Biomechanics, I-Sho Univ., Taiwan, R.O.C. (2000).

91. Chen CH, Lee WC, Tai CL, Chen WJ, Shih CH “Comparison of initial fixation strength in 3 different grafts using in posterior cruciate ligament reconstruction- biomechanical analysis in a porcine model” Annual Conf. of the Taiwanese Society of Biomechanics, I-Sho Univ., Taiwan, R.O.C. (2000).

92. Chen WJ, Tai CL, Chen WP, Lai PL, Lee KF, Jen JT “Bone graft healing is enhanced by hyperbaric oxygen therapy : an experimental study of lumbar vertebra in rabbit model” Annual Conf. of the Taiwanese Society of Biomechanics, I-Sho Univ., Taiwan, R.O.C.(2000).

93. Chen WP, Liu CP, Shih CH, Tai CL, Hou SH“Biomechanical study of the design parameters in THA stems.” Joint Conference of the Orthopaedic Research Society R.O.C. and the Formosan Society of Biomechanics, Taipei, Taiwan, R.O.C. (1999)

94. Shih CH, Tai CL, Lee PC, Chen WP, Chao WT, Chang, BH “Evaluation of periprosthetic bone change using dual-energy x-ray absorptiometry: clinical follow-up of bone loss with a straight-type or curve-type stem after THA.” Annual Symposium of the Biomedical Engineering Society, National Cheng-Kung Univ., Taiwan, R.O.C. (1999).

95. Shih CH, Tai CL, Chen WP, Liu JP “The Effect of Geometry and Cement Fixation of Femoral Stem on the Stress Shielding Effect of Proximal Femora in THA” Annual Conf. of the Orthopaedic Research Society, National Taiwan Univ., Taiwan, R.O.C. (1999).

96. Chen WP, Shih CH, Wu CS, Liu JP, Tai CL “Wear analysis of polyethylene inserts in acetabular components for total hip arthroplasty.” Joint Conference of the Orthopaedic Research Society R.O.C. and the Formosan Society of Biomechanics, Taipei, Taiwan, R.O.C. (1998)

97. Shih CH, Tai CL “The influence of prosthetic cup coverage area on the stability of acetabular fixation in total hip arthroplasty” Annual Conf. of the Orthopaedic Research Society, National Taiwan Univ., Taiwan, R.O.C. (1998).

98. Chen WP, Shih CH, Wu CS, Tai CL, Liao JD “Finite element stress analysis of polyethylene inserts in acetabular components for total hip arthroplasty” Joint Conference of the Orthopaedic Research Society R.O.C. (1997)

99. Yang WE, Shih CH, Tai CL “Biomechanical properties of bone ingrowth cement” Annual Conference of the Orthopaedic Research Society R.O.C. (1997)

100. Shih CH, Tai CL “Mechanical testing of polymethyl-methacrylate bone cement impregnated with bone and hydroxyapatite” Annual Conf. of the Biomechanics Society, National Cheng-Kung Univ., Taiwan, R.O.C.(1996).

101. Shih CH, Tai CL “Measurement of polyethylene wear in total hip arthroplasty ” Annual Conf. of the Biomedical Engineering Society, Chung-Yuan Christian Univ., Taiwan, R.O.C. (1996).