If you want a closed-back fit that helps keep outside noise out, choose beyerdynamic DT 770; if you need an open, airy listening presentation, choose Sennheiser HD 560S. For TV watching, the DT 770 is my straightforward pick for a shared or noisy room, while the HD 560S suits a quieter space where you want a more open sound. Neither is wireless, so your TV setup needs to accommodate a wired connection.
beyerdynamic DT 770 vs Sennheiser HD 560S at a Glance
• beyerdynamic DT 770 strength: Closed-back cups offer passive noise isolation; the trade-off is a 250-ohm version designed for high-end studio gear and headphone amplifiers.
• Sennheiser HD 560S strength: Open-back design and angled drivers create an airy, spacious presentation; the trade-off is that it does not provide noise control.
• The DT 770 is the more suitable pick for a TV room with household sounds nearby; the HD 560S better fits a quieter room and listeners who value an open presentation.
• Choose the DT 770 if isolation matters and your audio source can drive its 250-ohm impedance. Choose the HD 560S if you want an open design and can listen without needing to shut out your surroundings.
The DT 770 is a wired, over-ear, closed-back headphone with 250-ohm impedance. Its enclosed design is the key distinction in this comparison: it offers passive noise isolation, which can help make TV dialogue and other audio easier to focus on when there is ambient sound around you. It has velour ear pads, a 3-meter coiled cable, and a 3.5 mm connection with a pre-installed 1/4-inch screw-on adapter.
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-19 · 6 min read · Independent comparison
For television use, the long coiled cable may be convenient if you sit near your audio equipment, though it remains a wired setup. The 250-ohm version is intended for high-end studio gear and headphone amplifiers, so I would check that your TV, receiver, or headphone amplifier can support it before choosing. This model is not wireless, and the specifications do not describe a built-in TV transmitter or a dedicated wireless connection.
I would consider the DT 770 if you share a room, watch while other people are talking, or want a more enclosed listening experience. I would skip it if you specifically want an open-back sound, need wireless freedom, or cannot confirm that your source is suitable for a 250-ohm headphone. There are DT 770 versions at other impedances, but the product considered here is the 250-ohm model.
The HD 560S is a wired, open-back, over-ear headphone with 120-ohm impedance. Its open cups are designed to ventilate, and the angled driver alignment is intended to create a broad, articulate soundstage. Sennheiser describes its tuning as natural and accurate, with a linear presentation suited to analytical listening. It uses velour earpads and comes with a 6.3 mm jack and a 3.5 mm adapter.
That open construction may appeal during a long TV session in a quiet room, especially if you prefer a less enclosed feel. It also means the HD 560S is not the isolation-first choice. Its specifications list no noise control, so nearby conversation or other room sounds remain part of the listening environment. Like the DT 770, it is wired rather than wireless; the cable and adapter determine how it connects to your TV or audio equipment.
I would choose the HD 560S if you want an open presentation for films, broadcasts, or games and can listen without needing to block out the room. I would pass on it for TV watching in a noisy shared space or if you need a wireless connection. Its 120-ohm impedance is lower than the DT 770’s 250 ohms, but compatibility still depends on the output you plan to use.
Side-by-Side: Which Should You Choose?
• For a noisy or shared TV room → beyerdynamic DT 770. Its closed-back construction provides passive noise isolation; the HD 560S is open and has no listed noise control.
• For a setup with a headphone amplifier or high-end studio gear → beyerdynamic DT 770. The 250-ohm version is specifically intended for that kind of equipment.
• For a less enclosed feel during a long session → Sennheiser HD 560S. Its open, ventilated cups and velour pads are designed for comfort during extended listening.
• For a cable that can extend when needed → beyerdynamic DT 770. It includes a 3-meter coiled cable.
• For a lower listed impedance → Sennheiser HD 560S. It is 120 ohms compared with the DT 770’s 250 ohms, though that difference alone does not confirm compatibility with every TV.
• For a straightforward connection check → inspect your TV or receiver before buying either. Both headphones are wired; the DT 770 has a 3.5 mm jack and 1/4-inch adapter, while the HD 560S has a 6.3 mm jack and 3.5 mm adapter.
• For searches like “best sports earbuds for TV watching,” “best open ear headphones for TV watching,” or “best spatial audio headband headphones for TV watching” → note that neither product is an earbud, wireless TV headphone, nor a listed spatial-audio system. Between these two, choose based on the actual distinction: closed-back isolation with the DT 770 or open-back listening with the HD 560S.
In my opinion, I would buy the beyerdynamic DT 770 for TV watching if my source can handle its 250-ohm impedance. Its closed-back design gives it the more practical edge when household noise is a concern, and the coiled cable offers useful reach near an audio setup. I would choose the Sennheiser HD 560S instead for a quiet room where an open, airy presentation matters more than isolation. Neither should be mistaken for a wireless TV headphone.
For a room with nearby noise, I’d choose the DT 770 because its closed-back design offers passive noise isolation. For a quiet room and an open presentation, the HD 560S is the more natural fit.
Both are wired, but the available output on your TV or audio equipment matters. The DT 770 has a 3.5 mm jack with a 1/4-inch adapter; the HD 560S has a 6.3 mm jack with a 3.5 mm adapter.
The DT 770 is the only one of the pair described as providing passive noise isolation. The open-back HD 560S has no listed noise control and is not designed to shut out room sounds.
Value depends on the current price and on what features you will actually use, so check the current price on Amazon before deciding. For TV use, I would weigh the DT 770’s isolation and equipment needs against the HD 560S’s open design and lower listed impedance.
• TECKNET Ear Plugs vs Generic 45dB: Noise Isolating Sleep
• headphones for fire tablet 10
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.