Control Panel: Pushbuttons, Joysticks, wiring, ...

The screws used to fix the joysticks and the interface board must not protrude, so they must be countersunk type.

Here you can already see the whole set assembled, in the absence of wiring.

Bottom of the Control Panel. You can see the "Cherry" microswitches, the Mag-Stik Plus 4/8 joysticks and the I-PAC interface (with 32 inputs), everything from Ultimarc.

The wiring is performed. Everything comes together in the interface board, which will be connected (using a single USB cable) to the PC motherboard.

The interface used is the i-Pac by Ultimarc.