Belly band holster

How to Maintain a Pistol (Hand Gun)


Proper handling of guns/pistols is a must for every gun owner, and indispensable for optimal security and effectiveness! Taking care is the owner's best opportunity to check the gun and its components if there is wear or crack on the inside. Firearms with improper or untreated maintenance become unreliable. Lack of reliability can be a damaging consequence in case of malfunction/jams when you use it in any situation. Finally, if done correctly and consistently, a thorough cleaning process enhances your technique of handling weapons safely that will serve you well in all situations. Handle your firearms safely. Always keep the muzzle pointing in a safe direction, handle the firearm as if it is loaded / bulleted, and keep your finger away from the trigger. Do not forget to remove the bullet / magazine. Clear the contents. Drag the cock back and visually and physically (insert your finger inward) to check that there is no bullet in the bullet / magazine or inside the chamber. Reassure that your weapon has no bullets. You do not want an unexpected explosion when disarming you. That no one knows when an emergency will happen, then it is only natural that you save your weapon well, that is by using belly band holster.

Make sure to get rid of all the ammunition from the surroundings, ideally move to another room while cleaning the weapon. Dismantle your firearms safely. In many modern designs, this is a simple process. Remove the hammer/striker, pull the release label. Once pulled towards the back of the frame, the slide will move freely apart from the front of the weapon. The actual process may vary greatly depending on the firearm model you unload. Glock & Steyr users: Make sure repeatedly that your weapons are not bulletproof because you must pull the trigger to begin the process of disassembling the field. Identify the part you cleaned. There are four major parts of each semi-automatic firearm (although they may be installed in various ways). Frame/frame: This is the rod (or "handle") of firearms. The trigger is usually embedded in the framework, and the bullet / magazine chamber is located inside the trunk. Glide/slide: The metal piece on the top of the firearm that keeps the sealed bullet, compensates for the recoil (in most semi-auto), accommodates a badge of fire (and some other components). If you have a polymer frame, this section represents 70% (or more) of the overall weight of the weapon. Do not forget to protect your weapon from the touch of a child with the most comfortable belly band holster.


Rub all components using a washcloth, not necessarily using Kanebo. Eliminate as much as possible the thick pool of soot formed by the swiping of the usage and the gunpowder. Clean also any old oil and all unburnt powder. Scrub the inside of the bullet / magazine chamber, plantar, guiding rail, and the area around the barrel. You will find some areas make your fabric black (clean again this area). In this step, precision is not needed, scrub quickly. Use solvents (preferably designed to be used continuously when in contact with your skin, such as M-Pro 7) on all possible components. Most weapons manufacturers design their components (including polymers) to be safe when used with all types of solvents, but make sure not to use the type of solvent that is prohibited by the manufacturer. No need to use a lot of solvents and it is advisable not to forget concealed carry holster.