Bellsouth Email Settings

Do you struggle a lot with correct and required Bellsouth email settings to configure Bellsouth email account on different devices and Outlook? do not worry. (+1-888-409-0908 ) We have described all the correct and required Bellsouth.net email settings that the user needs to enter and apply. The article given below will solve all the issues and problems with email settings at Bellsouth.net. You can use these handy settings to set up your Bellsouth email account on your laptop, tablet, or mobile device. Listed below are the general SMTP, IMAP, and POP server settings which will then be able to configure your Bellsouth email account on any email client platform or device. Our step-by-step guide will also provide you with the step-by-step procedure for configuring a Bellsouth email account on different versions of Outlook.

However, it is worth noting that POP or IMAP can be used for the incoming mail server, and the SMTP settings are used for the outgoing mail server. Therefore, we have explained all these settings in the next section.

Let's start with the general IMAP, POP, and SMTP settings for Bellsouth email.

BELLSOUTH IMAP SERVER SETTINGS (Incoming mail server)

Go to the table below which highlights the correct Bellsouth IMAP server settings required in the process of enabling incoming mail services for your email account. Hence, you should carefully enter and apply the IMAP server settings as shown below. The IMAP server takes care of the incoming mail services.

After you are done applying the IMAP server settings as per the above details, the messages start appearing in your inbox without any problem.

BELLSOUTH POP server settings (incoming mail server)

The user has the option to select an IMAP or POP server. You can either choose an IMAP or a POP server as per your preference and requirements. Therefore, enter and apply BELLSOUTH POP settings as shown below in the table if you have decided to choose a POP server for incoming mail services.

All POP server configurations as above will help to configure your account as a POP account. After performing the POP server settings as in the above table, you can start receiving emails on your Bellsouth email account.

BELLSOUTH SMTP Server Settings (Outgoing Mail Server)

You must also enter and apply the required Bellsouth SMTP server settings as shown in the table below to access and use the outgoing mail services for your BELLSOUTH.NET email account. The SMTP server is responsible for outgoing email services for your email account and if you do not have the correct SMTP server settings as shown below, you will not be able to send emails from your account.

After configuring your BELLSOUTH email account as per the above SMTP server settings, outgoing mail services are enabled and you can now send emails to your email contacts without any hassle.

BELLSOUTH Email Settings for Outlook 2016:

Refer to the guide below for the steps that explain all the required BELLSOUTH.NET email settings for Outlook 2016, which you must follow to successfully setup your Bellsouth email account with Outlook. Go ahead with these quick steps and enjoy BELLSOUTH.NET email service on your Outlook account.

Step 1 - First, you have to open Outlook on your system.

Step 2 - Now select the "File" option available on the menu bar.

Step 3 - Select the "Accounts Settings" option.

Step 4 - Choose the "Manual setup or additional server types" option and then click "Next".

Step 5 - Select the POP or IMAP server option and press the Next button.

Step-6 Now you are required to fill in all the necessary details in the respective fields boxes based on your choice of IMAP or POP server and then click on the More settings option.

Step 7 - Move to the outgoing server tab and make sure the checkboxes that say “Outgoing server (SMTP) requires authentication” and “Use same incoming server settings” are checked.

Step 8 - Now click on the Advanced tab and make sure that the server settings are as shown below according to your choice of IMAP or POP server.

BELLSOUTH.NET POP settings:

Make sure the “This service requires a secure connection (SSL)” checkbox is checked for both incoming and outgoing mail if you want to enable secure SSL/TLS settings.

Step 9- Now, you should click on the OK button to save and apply the above server settings.

Step 10- At the end, you need to click on the “Next” button and then click on “Finish” to finish the account configuration process.

amazing! Your Bellsouth email account has been successfully setup in Outlook 2016 based on correct Bellsouth email settings for Outlook 2016. You can now simply start using Bellsouth email services through Outlook 2016 without facing any hurdles.

BELLSOUTH Email Settings for Outlook 2007

Want to set up your Bellsouth email account in Outlook 2007? After that, the following steps are just for you. You need to follow all below mentioned simple steps in sequence along with apply correct Bellsouth email settings for Outlook 2007 to successfully configure your Bellsouth email account in Outlook 2007.

Step 1 - First, you need to open Outlook on your system.

Step 2 - Now click on the “Tools” option available on the top left menu bar.

Step 3 - Select the "Accounts Settings" option.

Step 4 - Find the Email tab option and click on it, it is on the account settings page and then click on the New option.

Step 5 - Select the “Microsoft Exchange, POP3, IMAP, or HTTP” option and then click on the Next button.

Step 6 - Make sure the checkbox that says “Manually configured server settings or additional server types” is checked and then the Next button.

Step 7 - Choose the 'Internet email' option and then click on the 'Next' button.

Step 8 - Now you need to fill in all the necessary details in the fields boxes provided based on your choice of IMAP or POP server and then click on the More settings option.

Step 9- Click on the Outgoing Server tab and make sure the checkboxes that say “Outgoing server (SMTP) requires authentication” and “Use same incoming server settings” are checked.

Step 10 - Now head towards the Advanced tab and make sure the server settings are as shown below depending on your choice of IMAP or POP server.

Step 11- Now, you should click on the OK button to save and apply the above server settings.

Step 12- Finally, you need to click on the Next button and then click on Finish to finish the account configuration process.

Wonderful! Based on correct Bellsouth email settings for Outlook 2007, your Bellsouth email account has been successfully configured in Outlook 2007. Now you are all ready to use Bellsouth email services through Outlook 2007, and send/receive emails without any interruption.

BELLSOUTH Email Settings for Outlook 2010

For those who are looking to setup their Bellsouth email account on Outlook 2010, we have covered the complete procedure along with required Bellsouth email settings for Outlook 2010. Follow below as given and get your Bellsouth email account configured on Outlook 2010 in no time.

Step 1 - First, you need to run Outlook on your system.

Step 2 - Now click on the "Tools" option present at the top of the left menu bar.

Step 3 - Select the "Accounts Settings" option.

Step 4 - Find and click on the Email tab under Account Settings page, after that click on the New option.

Step 5 - Select the option “Microsoft Exchange, POP3, IMAP, or HTTP” and hit the “Next” button.

Step 6 - Make sure the checkbox that says “Manually configured server settings or additional server types” is checked and hit the Next button.

Step 7 - Choose the 'Internet email' option and then click on the 'Next' button.

Step 8 - Now you need to enter all the necessary details in the fields boxes provided as per your choice of IMAP or POP server and then click on the More settings option.

Step 9- Go to the Outgoing Server tab and make sure the “Outgoing server (SMTP) requires authentication” and “Use same incoming server settings” checkboxes are checked.

Step 10- Now go towards the Advanced tab and make sure the server settings are as indicated below based on your choice of IMAP or POP server.

Step 11- Now, click on the OK button to save and apply the above server settings.

Step 12- Finally, you need to click on the Next button and then click on Finish to complete the account configuration process.

our end! You have successfully followed all the steps required to configure your Bellsouth email account on Outlook 2013. All important email settings in Bellsouth for Outlook 2013 will be applied automatically once you are done following all the above steps.

Bellsouth Email Settings For iPhone


Many times, users complain about facing the issue of sending or receiving an email which issue generally occurs due to incorrect Bellsouth.Net Email Server Settings. So, if you also want to access and setup the Bellsouth email application by a web browser as well as on mobile devices such as iPad or iPhone, or Android device? Then you should know the correct Bellsouth.net webmail email settings.

In this post, you will acquire all the information about important Bellsouth.net Email Settings For iPad as well as iPhone and Android devices. Follow the below given the settings of Bellsouth.net email server of IMAP and SMTP servers.


Bellsouth Email IMAP & POP3 Server Settings For iPhone Device:


Follow the below-given steps to setup Bellsouth email server settings for iPhone:



For IMAP:


Inbound server: imap.mail.att.net

Inbound Port: 993

SSL: Yes

Outbound server: smtp.mail.att.net

Outbound Port: 587 or 465

 

For POP3:

Inbound server: inbound.att.net

Port Inbound: 995

SSL: Yes

Outbound server: outbound.att.net

Port SMTP- 465

 

Bellsouth.net Email Settings For iPad:

Follow the below-given steps to setup Bellsouth.Net Email Sever Settings for iPad:


Then enter the following correct settings for the IMAP server and POP3:

IMAP:

Inbound server: imap.mail.att.net

Inbound Port: 993

SSL: Yes

Outbound server: smtp.mail.att.net

Outbound Port: 587 or 465

 

POP3:

Inbound server: inbound.att.net

Port Inbound: 995

SSL: Yes

Outbound server: outbound.att.net

Port SMTP- 465

 

BellSouth.net Email Settings For Android:

And then, enter the Bellsouth email address. Then enter the correct POP3 or IMAP server setting in the following way:


For IMAP:

Inbound server - mail.att.net

Port inbound -993

Port SMTP: 587 or 465

SSL: Yes


POP3:

Inbound server: att.net

Port: 995

Port SMTP- 465

That’s it.


This is all about the simple steps to set up Bellsouth.net Email Settings for iPad, iPhone, and Android. In any case, if you face any issues follow the above steps to the Bellsouth.net Email server setting on your device so then you can professional help to get the correct guidance & help and easily resolve the issue within a few minutes.

That's it! BellSouth. net's general email settings above can be used to successfully configure a Bellsouth email account on various devices such as Android, iPhone, iPad, and on many email client platforms. We have also covered the complete step-by-step procedure for configuring a Bellsouth email account on different Outlook versions. But if you still have any questions or concerns in mind, please let us know by using our live chat service. We assure you that your query or email related issue will be resolved within a few minutes. Customer satisfaction is our number one priority, our team is always ready to support and assist you 24/7.

We believe in providing everything in one place. Hence, we have also covered a detailed guide that will help in knowing the correct Zoominternet.net email settings and Rocketmail.com email settings required for successful configuration of Zoominternet.net or Rocketmail.com email account on any email client device or platform.