Belkin.Range - Belkin Extender Setup Support - Setup Belkin Extender
Belkin.Range - Belkin Extender Setup Support - Setup Belkin Extender
Belkin.range is an official web address from where the users can perform various operations such as installing the range extender, executing the setup procedure, and updating the extender. The users can also fix the range extender issues like poor internet-related issues or dead zones issues.
The users can easily access the belkin.range web page from the preferred web browser. Thus, once the official web page gets open, then the users can easily change the extender settings or can set up and update the Belkin range extender.
Furthermore, through the help of the information penned below, it would get easy for all users to execute the Belkin extender setup via Belkin.Range. Also, the users can update the firmware of the belkin range extender. Hence, the users are advised to go through the following information.
The users are suggested to go through the following steps to execute the Belkin Range Extender Setup through belkin.range web-page.
The users are recommended to plug the range extender into a power socket.
Next, the users need to locate and connect to the belkin.setup network.
Note: The users should reset the range extender if they’re unable to see the belkin.setup network.
After that, the users are required to open the web browser on their system or device.
In the web browser’s search section, the users are recommended to enter “belkin.range” and then click on “Search.”
Note: The belkin range extender setup page can be accessed through “192.168.206.1” also.
Next, the users will be directed to Belkin’s official page, from where they can begin with the setup process.
On the official setup page, the users must tap on the “Get Started” button.
Next, the users should select the wireless network they wish to extend and then hit the “Next” button.
Note: The users must hit the “Refresh” button if the wireless network is not available in the list.
After that, the users need to enter the wireless network's password in the required field and hit the “Next” button.
The users who are using a dual-band network should select the second wireless network they wish to extend and repeat the above step.
After this, users are suggested to click on the “Next” button.
Note: The users who are using a single-band Range Extender will detect a 2.4 GHz band.
In the end, users must review the information and edit if needed.
After that, the users should tap on “Create Extended Network” to get done with the setup process.
The users can execute the Belkin Range Extender Setup via belkin.range by following the guidelines given above. However, to perform the setup process, the users must visit the official website of Belkin, i.e., belkin.range. Therefore, the users who wish to complete the range extender setup method are suggested to follow the above instructions. If the users encounter any issue during the setup process, they must contact the customer support expert team to get a solution.
This section includes the steps to update the firmware of Belkin Range Extender via belkin.range. However, before proceeding with the firmware update process, the users must download the firmware.
Note: The users must ensure that their computer is connected to the Belkin range extender via an ethernet cable for stable connectivity.
Note: The users should not update the range extender's firmware wirelessly as interruptions may cause permanent damage to the extender.
Once the users have downloaded the firmware, they should open the internet browser on their system/device.
After opening the web browser, the users need to search for the “http://belkin.range/” site.
The users can access the setup page via “192.168.206.1” also.
The users are advised to click on the “Login” button displayed on the official page.
Next, the users are required to enter the “Password” of the Belkin Range Extender in the provided field and click on “Submit.”
Note: The users should leave the password field blank if they have not created the password yet and click on the “Submit” button to proceed further.
After entering the password, the users need to tap on the “Firmware Update” option.
Next, the users are required to click on “Choose File” and select the downloaded firmware.
Once the users have selected the downloaded firmware, they must tap on the “Open” button to open it.
After that, the users are recommended to click on “Update” to proceed further.
Next, the users must tap on “OK.”
Users are suggested to click on “OK” again when prompted and wait for the firmware update to finish.
Note: The users must ensure that they do not unplug, restart, or power off the range extender during the firmware update.
The users can smoothly update the belkin firmware via belkin.range by following the above steps. Hence, the users are recommended to go through the above information for the same. If the users encounter any issue during the firmware update process, they must contact the customer support expert team to get a solution.
This write-up includes the steps to execute the Belkin Range Extender Setup and Firmware Update procedure via belkin.range.