Belkin Range Extender Setup - Steps for Belkin Range Extender Setup

The Belkin range extenders are the devices that act as repeaters for your router's wireless signal. You can set them using wires and cables. Also, they are easy to set up wirelessly. Using the Belkin range extenders, you can boost your WiFi router’s network range and fetch the signals in weak network zones or areas.

This post will help the users have their Belkin Range Extender Setup with essential preparation tips that will make the users go smooth with the process.

Before you proceed with the Belkin Range Extender Setup, you must be sure of the initial preparations already done. As a result, the process becomes comfortable and convenient. Check out the requirements for your Belkin extender setup:

• First, you must unbox your extender carefully without causing any damage to the product inside.

• In the box, you will find additional antennas. Bring them out and keep them aside carefully.

• Then, bring your extender out of the box and remove the plastic wrapping material from it.

• After that, connect the antennas properly to get excellent signal strength.

• Remember, if you are setting up a desktop range extender, then you must have an Ethernet cable available. It should be properly functioning and free of wear & tear.

• Moreover, a working Ethernet port on your system is required for this process.

• Further, the router must be already set up properly and connected to a power source.

• The name of WiFi and password must be available with you to establish a network connection.

• Also, if your router is dual-band, there must be a wireless SSID and password available for both bands.

• You must also have the IP address of your extender to access the Belkin range extender setup page on the web.

• In addition to this, there must be your Belkin extender login credentials available to initiate the setup process. However, if your extender is new and you did not yet change its settings ever before, you can use the default credentials. You will find the same at the back of your extender.

• To run the Belkin extender setup window, you must have an updated web browser to support the system.

• Also, delete the cache data, browser history, and unusual files from your system before you run the Belkin extender setup process to avoid errors during the session.

The process of Belkin range extender setup is quite easy and straightforward. We have given some simple steps here for your help:

• First, you have to link your extender to a power source appropriately. You have to do it with your plug-in extender.

• For the desktop range extender users, an Ethernet cable is required. The users will have to link the same to their Ethernet port of the system.

• If you want to establish a wireless connection, then search for the default extender name. It is 'belkin.setup.' You will get the same on the WiFi list of your system.

• After you choose the extender name, a pop-up box appears on the screen. It shows a blank password field.

• Therefore, you have to add the default extender password in that field.

• After that, tap on the 'connect' button.

• Next, you must access the Belkin Range Extender Setup page.

• For that, you have to run a safe web browser for inputting the link ‘http://belkin.range.' in your browser's search bar.

• Apart from this link, you can use the IP address '192.168.206.1' in the search bar.

• After that, hit the enter key to load the requested web page.

• Now, the respective web page will come in view within a few seconds on your system's screen.

• After that, click on the 'get started' button.

• As a result, a new window projects on the screen. It will contain the list of WiFi network names available near your device.

• Hence, make a selection for the SSID name from that list. It should be the name that you want to extend the range.

• Further, enter the Belkin wireless network password into the prompted field.

• A page demonstrating the extended network information will turn up on the screen as soon as the connection betwixt your router and the extender establishes.

• Now, you can modify the password and SSID name if you want to do the same. Else, you can skip the option and ‘continue’ the process by clicking on the ‘create extended network’ tab.

This step completes the Belkin Range Extender Setup process.

This post is to help the users go easy with their Belkin Range Extender Setup. It includes the setup procedure with essential preparation tips.