Electrochemical reactions change the composition and boiling behaviour of a working fluid, opening a route to liquid-pumped refrigeration. We model reaction, phase equilibrium, charge balance, and component operation to identify feasible operating regions and energy-efficient cycle conditions.
Related papers
Mapping the Minimum-Conversion Feasible Operating Envelope of an Electrochemically-Compressed IPA/Acetone Chemical-Looping Heat-Pump Cycle
In preparation
R290 and R744 can serve complementary temperature duties in vehicles and buildings. We evaluate cascade and duty-partitioned architectures, transient operation, and control to balance heating or cooling capacity with electricity consumption.
Related papers
Refrigerant selection involves capacity, pressure, efficiency, flammability, and environmental constraints. We study charge storage and control, mixture behaviour during leakage and servicing, and the operating limits created by simultaneous GWP and PFAS restrictions.
Related papers
Refrigerant charge sensitivity in EV heat pump systems: Impact of storage location and control mode in cooling and heating operation
2026 · Applied Thermal Engineering, 131065
DOI: 10.1016/j.applthermaleng.2026.131065
Local composition shift of refrigerant mixtures and its effect on cooling performance in a heat pump system
2025 · Energy Conversion and Management 333, 119809
DOI: 10.1016/j.enconman.2025.119809
Combined effect of refrigerant amount reduction and composition change on heat pump system performance during refrigerant mixture leakage
2025 · Applied Thermal Engineering
DOI: 10.1016/j.applthermaleng.2024.124691
Estimation of local composition in zeotropic mixtures and its application to heat pump system modeling
2025 · Applied Thermal Engineering
DOI: 10.1016/j.applthermaleng.2025.127345
Isothermal (vapor + liquid) equilibrium measurements and correlation of the binary mixture 3,3,3-trifluoropropene (R1243zf) + isobutane (R600a) at temperatures from 283.15 to 323.15 K
2024 · International Journal of Refrigeration
DOI: 10.1016/j.ijrefrig.2024.02.032
Recovery as a capacity-bounded complement to the low-GWP refrigerant transition: a cohort stock-flow test of Korea's 2035 HFC target
Under review
Additional impact of PFAS restrictions on low-global-warming-potential refrigerant selection
Under review
Dynamic models and linear parameter-varying representations predict how coupled evaporators respond to changing loads. Capacity-tracking control and supervisory fan optimization coordinate the system rather than holding fixed pressure setpoints, targeting efficient and stable part-load operation.
Related papers
Supervisory optimization strategy for energy minimization in multi-evaporator air-conditioning systems
2026 · Energy and Buildings, 117919
DOI: 10.1016/j.enbuild.2026.117919
Predictive capacity tracking controller for multi-evaporator air-conditioning system using linear parameter-varying model
2026 · Applied Thermal Engineering
DOI: 10.1016/j.applthermaleng.2026.131877
We visualize refrigerant vapor flow in compressor passages to understand losses and unstable behavior during cold-weather operation. These observations inform compressor and system designs that sustain heating performance when ambient temperatures fall.
Related papers
We develop compact heat exchangers by balancing heat transfer, pressure drop, and size. Physics-informed and reduced-order models support inverse design, followed by fabrication and validation.
Related papers
In preparation