Bluetooth adapters

The line consists of seven Bluetooth adapters.

The main purpose of these adapters is the replacement of the telescope control from the button consoles such as SynTrek, SynScan, NexStar, AutoStar, etc. to more convenient, control from mobile devices.

The main software for mobile devices can be:

SkySafari, DSO Planner, Virtuoso Telescope Control, ORION StarSeek and etc.

Also with the help of these adapters you can control the telescope from desktop computers and laptops. In this case, you can use the same software as for wire management (Cartes de Ciel, Stelarium, MaximDL, etc.)


1.ScanBt

Bluetooth adapter for wireless management of SkyWatcher (Synta) and ORION telescopes, on which SynScan is installed. The adapter is connected to the connector for the RS232, оn the standard hand controller.


2.TrekBt

Bluetooth adapter for wireless, direct control of equatorial mounts SkyWatcher (Synta) and ORION, on which the standard SynTrek or SynScan control system is installed. But at the same time the adapter is connected instead of the standard hand controller, directly to the mount. Those. The standard hand controller in this configuration is not needed at all.


3. TrekBtAZ

Bluetooth adapter for wireless, direct control of azimutal mounts SkyWatcher (Synta) and ORION, on which the standard SynTrekAZ or SynScanAZ control system is installed. But at the same time the adapter is connected instead of the standard hand controller, directly to the mount. Those. The standard hand controller in this configuration is not needed at all.


4. AutoBtLX200

Bluetooth adapter for wireless management of MEADE LX200 telescopes. The adapter is connected to the connector for the RS232.


5. AutoBt

Bluetooth module, for wireless control telescopes MEADE ETX, LX90, LXD. The adapter is connected to the connector for the RS232.


6.StarBt

Bluetooth module, for wireless control Celestron telescopes. The adapter is connected to the connector for the RS232.


Power adapters from the mounts.