How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-25 · 8 min read · Independent comparison
• ASKUBSKU School Earbuds biggest strength: a semi in-ear shape that sits at 45 degrees into the ear, so there is no earpress feeling and no pain after long sessions — plus an inline mic and volume control for calls and video.
• ASKUBSKU School Earbuds biggest trade-off: the inline volume control does not work with iOS devices, and the 45-degree semi in-ear fit means you get very little passive noise blocking.
• Audiovance Vibes 202 biggest strength: a 1-Tesla dynamic driver, a frequency range of 8 to 23k Hz and a silver-plated Litz-braided cable — this is a proper in-ear monitor built for sound quality and isolation.
• Audiovance Vibes 202 biggest trade-off: there is no microphone at all, so you cannot take calls or use voice chat with it, and it costs more thought to wear because of the over-ear earhooks.
• Buy ASKUBSKU School Earbuds if you mostly make calls, sit in online classes, watch videos on a laptop and want something light you forget you're wearing.
• Buy Audiovance Vibes 202 if you mostly listen to music, game or monitor audio and care about bass, detail and blocking out the room around you.
• Quick pick: everyday communication and comfort → ASKUBSKU. Sound quality and immersion → Audiovance.
The ASKUBSKU School Earbuds are a 3.5mm wired set with a built-in microphone, inline volume control and a semi in-ear design. The pitch here is comfort and convenience, not audiophile performance. The earbuds sit at a 45-degree angle into the ear rather than sealing the canal, which is exactly why the brand describes them as "no earpress" — nothing is pushing against the inside of your ear, so a two-hour lecture or a long flight doesn't leave you sore. The metal enclosure and Black finish give it a plain, understated look that fits a school bag or a desk drawer.
On sound, ASKUBSKU uses a dynamic driver with a frequency range of 20 Hz to 20,000 Hz and a high-amplitude, low-distortion tuning aimed at bass detail and clear mid-high pitch. That's a standard full-range spec — fine for music, podcasts and video, and honest about what it is. The inline control lets you adjust volume without pulling out your phone, and the mic is designed to lift voice clarity for calls. One caveat straight from the spec sheet: the inline volume control is not available for iOS devices, so if you're on an iPhone, treat the volume buttons as decoration.
The kit is genuinely practical: it ships with a storage case, so it's a toss-it-in-the-bag pair. It's built around 3.5mm devices — the list covers a huge spread of Samsung Galaxy A-series and S-series models, Google Pixel 4a/3a/5a, OnePlus Nord and numbered models, a long run of Motorola G and Edge-style phones, Redmi, POCO and Black Shark handsets. If your phone still has a headphone jack, this likely fits it.
Audiovance Vibes 202: Who It's For
The Audiovance Vibes 202 is a different animal. This is an in-ear monitor, and the spec sheet reads like one: a 1-Tesla dynamic driver, master-tuned acoustic chambers, a frequency range stretching from 8 Hz to 23k Hz, and a high-purity silver-plated, Litz-braided cable with 24K gold-plated plugs. The whole design is aimed at lossless transmission and precise, balanced sound — deep bass, rich mids, crisp highs. If you've only ever used basic phone earbuds, the sealed fit and the low end here are the parts that will jump out first.
Comfort is handled differently too. Instead of resting in the ear, the Vibes 202 uses preformed over-ear earhooks that loop the cable over the top of your ear and keep it out of the way — a design that stays put when you move your head. It comes with six pairs of soft eartips in two colors and three sizes, and those tips are what create the seal. That seal is what gives you the noise isolation: it blocks ambient sound physically rather than electronically. The shells are a semi-transparent resin with metal, PC and silicone in the mix, which gives it a much more technical look than a plain pair of school earbuds.
One structural detail worth knowing: the cable is detachable via a 360-degree rotative MMCX connector, so the cable can be swapped or replaced. In the box you get the earbuds, a 63-inch detachable audio cable, the six pairs of eartips, a carrying case, a carabiner and a user manual. Weight is listed at 2.29 ounces.
The biggest limitation is stated right in the name: no mic. There's no microphone and no inline call control, so this is not a headset — it's a listening tool. It also requires a wired 3.5mm port and works with laptops, desktops, MP3 players, gaming consoles and select audio gear. No Bluetooth, no batteries.
Buy it if you listen to music seriously, game, or do any kind of audio monitoring, and you want isolation and detail. Skip it if you need to take calls, join voice meetings or use voice chat — with no mic, that's off the table.
Side-by-Side: Which Should You Choose?
• Best for calls and voice chat → ASKUBSKU School Earbuds. It has a built-in mic and inline controls; the Vibes 202 has no microphone at all.
• Best for sound quality and bass → Audiovance Vibes 202. A 1-Tesla driver, 8–23k Hz range and silver-plated cable put it well ahead on audio.
• Best for noise isolation → Audiovance Vibes 202. Sealed eartips plus sound isolation block the room; the semi in-ear ASKUBSKU deliberately lets sound in.
• Best for staying put while you move → Audiovance Vibes 202. Over-ear earhooks plus a 360-degree MMCX connector keep the cable anchored.
• Best for iPhone users who want volume buttons → Audiovance Vibes 202. ASKUBSKU's inline volume control doesn't work on iOS devices; the Vibes 202 has no inline volume to worry about.
• Best for travel and laptop video → ASKUBSKU School Earbuds. Light, cheap-feeling in a good way, comes with a case, and you can still hear announcements.
• Best for gaming and monitoring → Audiovance Vibes 202. Built for precise, balanced reproduction with a detachable cable you can replace.
In my opinion, if you can only own one, I'd buy the Audiovance Vibes 202. The driver, the frequency range, the detachable silver-plated cable and the six pairs of eartips make it the more capable product, and it's the one I'd reach for music, gaming or any situation where the sound matters. The catch is real, though: no mic means no calls. So if your wired earbuds are mainly for class, meetings and phone conversations, I'd take the ASKUBSKU School Earbuds instead — the comfort and the mic are exactly what that job needs. Check the current price on Amazon before you decide, since that gap is what usually settles this.
how to make wired earbuds stay in ear
Fit is the whole game. On the Vibes 202, work through the six pairs of eartips until you find the size that seals your canal, then loop the preformed earhooks over your ear so the cable pulls upward, not down. On the semi in-ear ASKUBSKU, the key is the angle — the earbuds are meant to go in at 45 degrees, so put them in directly at that angle rather than twisting them.
how to make apple wired earbuds stay in ear
The same principle applies to any wired bud: a snug seal plus strain relief. Try different tip sizes if your model offers them, insert at the correct angle for the shape, and route the cable so it isn't tugging the earbud sideways. One thing specific to ASKUBSKU: its inline volume control doesn't work with iOS devices, so on an iPhone you'd control volume on the phone itself.
how to put earbuds in your ear
For ASKUBSKU School Earbuds, note the 45-degree semi in-ear design and just place them in at that angle — no deep insertion needed, which is the point of the "no earpress" shape. For the Vibes 202, slide the tip into the canal until you feel a seal, then drape the cable over the top of your ear. Push in snugly for the best bass and treble.
how to keep earbuds in ears
Choose the right tip size first, then manage the cable. The Vibes 202's over-ear earhooks and 360-degree rotative MMCX connector are designed to keep the cable out of the way so it can't drag the earbuds loose. With the ASKUBSKU, the 45-degree angle is what stops them slipping — get that angle right and they hold. Also keep the 3.5mm port clean; dust and debris in the jack can cause connection problems.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: JBL Vibe Beam vs Audiovance Vibes 202: Wired in Ear Earbuds, EARLA TEC Replacement Audio Cable vs ASKUBSKU Earbuds 3.5mm, ASKUBSKU USB C Headphones vs LEEMC Earbuds: Headphones for