Arris Router Login

Arris Router Login

ARRIS routers are one of the popular routers in the industry nowadays. It became more popular when it tied-up with the Internet service provider giant, Xfinity. ARRIS residential gateway router is part of the Internet bundles available in Xfinity. Here’s a quick guide to the Arris Router Login.

The Arris Router Login configuration requires very few easy steps. Router-related jargon that you should be aware of is included in this guide. If your router is not ARRIS, you can check out our other guides on Router Login List.

How to Login to the ARRIS Router Web-Interface

Before starting the configuration, it is vital to know why you need to do it. It’s not just a standard procedure but the pillar of your home network’s security. Here’s how:

  1. Connect your device to your ARRIS router. You can do this in two ways. Either you use a wired connection through LAN cable or you get a wireless connection. However, we recommend the former to have uninterrupted access.

  2. Once you’ve established a connection, open any browser available in your device and type the 192.168.l.100.1 If that doesn’t work, you may find your router’s IP address through these steps.

  3. The Arris Router Login page will show up and will ask for your login credentials. If you already personalized your router admin login information, login accordingly. Otherwise, key in the default router admin settings. For the username, type admin, and password type password.

  4. Once logged in, you should be seeing the router admin homepage like the image below. You may now start configuring your router.

What is the Default Login for ARRIS Router?

Usually, Arris Router Login information revolves around terms like admin, password, 1234 or even blank. This also depends on the model of the router. But for most ARRIS routers, usernames are admin or (blank).

Meanwhile, the values for a password may vary may be admin, password, 1234, or (blank). You normally find this detail beneath the router or in the box.

Other routers have similar default login credentials too. Check out our guides for the NetGear, Hitron, Spectrum, and Orbi.

Troubleshooting Guide for ARRIS Routers

Just like in us humans, there are also ‘first-aid’ solutions before heading to major ones. So before calling out your Internet Service Provider or buying a new router, check these steps:

ARRIS Router Power Cycling - Power Cycling is a process of allowing a device to restart and re-operate back to its optimal performance. This process helps to refresh the software of the device and get rid of stuck data that has piled up.

You can do this by unplugging your router for 10-30 seconds. You may plug back again and see if fixes any connection problems you’re experiencing. Try to do this first before heading to a reset. This step can make wonders to your router that’ll make you surprised.

Check your cables - Sometimes, we make things complicated and get frustrated. Take a quick breath. Check if your cables are properly plugged, in the right location or if it’s cut off.

Make reset your last resort - Reset is the course of action if nothing else works. You may do this by pressing the reset button at the back of the router. Press it for 15-20 seconds and wait for the lights to stop blinking.

Once the LED lights become steady, the reset has already taken place. Proceed to re-configure your router admin login credentials.

ARRIS Router Login: FAQ

How to login to ARRIS router?

  • Connect your device to your ARRIS router. You can do this in two ways. -Either you use a wired connection through LAN cable or you get a wireless connection. However, we recommend the former to have uninterrupted access.

  • Once you’ve established a connection, open any browser available in your device and type the 192.168.l.100.1 If that doesn’t work, you may find your router’s IP address through these steps.

  • Arris Router Login page will show up and will ask for your login credentials. If you already personalized your router admin login information, login accordingly. Otherwise, key in the default router admin settings. For the username, type admin, and for password type password.

  • Once logged in, you should be seeing the router admin homepage like the image below. You may now start configuring your router.

How to reset Arris Router Login?

Reset is the course of action if nothing else works. You may do this by pressing the reset button at the back of the router. Press it for 15-20 seconds and wait for the lights to stop blinking.

Once the LED lights become steady, the reset has already taken place. Proceed to re-configure your router admin login credentials.

What is the default login for ARRIS router?

Usually, ARRIS routerlogin information revolves around terms like admin, password, 1234, or even blank. This also depends on the model of the router. But for most ARRIS routers, usernames are admin or (blank).

Conclusion

We hope this article has helped you manage your Arris Router Login and the common router problems. You can check the login details of other routers in our router login list. Were you able to fix your router through our troubleshooting guide? Let us know in the comments.