E.J. Lee†, S. Shin†, J. Hwang, S.J. Kim* and J.W. Lee*, “Optimization of Spin Coating Parameters for Hydrophobic Cover Glasses in Cellular Microscopy” Journal of Mechanical Science and Technology (2025) In revision
C.G. Jothi Prakash, J.W. Lee*, “Biomimetic materials for fog harvesting: Prospects and Challenges” Desalination (2025) Accepted
H.S. Kim, E.J. Lee, J.W. Lee*, “Fabrication of highly transparent rigid polyurethane with superhydrophobic and slippery liquid-infused porous surfaces” Applied Surface Scinece Advances (2025) In revision
C.G. Jothi Prakash, D.G. Ahn, J.W. Lee*, “High Efficiency Surface Finishing of AM 17-4PH Stainless Steel: Roughness Reduction and Corrosion Protection” Steel Research International (2025) Accepted
E.J. Lee, K.K. Lee, D.G. Ahn, J.W. Lee*, “Micro/nanostructure-based surface modification after electropolishing of TiAl6V4 manufactured by selective laser melting process: superhydrophilic, superhydrophobic, SLIPS” International Journal of Precision Engineering and Manufacturing-Green Technology (2025) Accepted
C.G. Jothi Prakash, J.W. Lee*, “Superaerophobic 0D Nickel – 2D Ceria Supported 316L for Enhanced OER and HER Activity” Surface & Coatings Technology 507 (2025) 132143 [IF:5.4, JCR 16.7%]
Dong Hyeon Lee, J.W. Lee*, "Design of a simple unfailing microdroplet dispenser using a droplet pusher based on a superhydrophobic surface" Applied Surface Science 688 (2025) 162394 [IF: 6.3, JCR 10.9%]
J.U. Jeong, K.K. Lee, D.G. Ahn, J.W. Lee*, “Formation of Si-based nanoporous structures on AlSi10Mg manufactured by selective laser melting” Surface & Coatings Technology 497 (2025) 131789 [IF:5.4, JCR 16.7%]
C.G. Jothi Prakash, J.W. Lee*, “Influence of Ni and Mo on corrosion inhibition of SS316L etched in hydrochloric acid–nitric acid mixture” Advanced Engineering Materials 26(22) (2024) 2400862
J.U. Jeong, K.K. Lee, D.G. Ahn, J.W. Lee*, “Study of surface roughness change of AlSi10Mg based on selective laser melting (SLM) using electropolishing tech-nique” Journal of Mechanical Science and Technology 38(9) (2024) 4580-4585
J.W. Lee†, J.A. Cho†, Y.J. Roh†, M.A. Han, J.U. Jeong, A.V. Anand Mariadoss, S.A. Subramanian, E.H. Kang, J Yeom, C.H. Lee*, S.J. Kim*, († equally contributed) “Assessment of Anti-Biofilm Surface Coating of Surgical Titanium Plate with Biocompatible Materials in vivo” Biomaterials Research 28 (2024) [IF:9.6, JCR 8.5%]
J.U. Jeong, C.G. Jothi Prakash, J.W. Lee*, “Facile fabrication of microstructured superhydrophilic and superhydrophobic STS 316L” Current Applied Physics 65 (2024) 60-67 [IF:2.4]
C.G. Jothi Prakash, J.W. Lee*, “Active surface area dependent water harvesting of desert beetle inspired hybrid wetting surfaces” Langmuir 40 (2024) 5499-5507 [IF:3.7]
14. Y. Shin, K.Y. Lee, J.W. Lee, W. Hwang*, "Scalable Micro/Nanostructured Superhydrophobic Surface Modifications for Enhanced Energy Efficiency and Heat Transfer Performance in Stainless Steel and Titanium" Materials Research Express 10 (2023) 075001 [IF:2.3]
15. E.J. Lee, C.G. Jothi Prakash, J.W. Lee*, "A facile fabrication method of wettability modification of TiAl6V4 based on alkali solution treatment: superhydrophilic, superhydrophobic and slippery surface" Surface & Coatings Technology 468 (2023) 129782 [IF:5.4, JCR 16.7%]
16. J. Kim, U.P. Kumar, S.J. Lee, C.L. Kim, J.W. Lee*, “Implementation of endurable superhydrophobic surfaces through dilution rate control of the PDMS coating on micro-nano surface structures” Polymer 275 (2023) 125929 [IF: 4.6]
17. C.G. Jothi Prakash, J.W. Lee*, “Selective de-silanization assisted wettability patterning of aluminum surfaces” Journal of Materials Science 58 (2023) 6775-6783 [IF: 4.5]
18. M. Lee, J. Ham, J.W. Lee, H. Cho*, “Analysis of thermal comfort, energy consumption, and CO2 reduction of indoor space according to the type of local heating under winter rest conditions” Energy 268 (2023) 126722 [IF: 9.0, JCR 4.0%]
K.M. Kim†, J.W. Lee†, S.J. Lee, C.L. Kim, “Friction Property of Hierarchical Micro/nanopatterned PDMS” Materials 15 (2022) 8736 († equally contributed) [IF: 3.4]
J.A. Cho, Y.J. Roh, H.R. Son, H. Choi, J.W. Lee*, S.J. Kim*, C.H. Lee*, “Assessment of the biofilm-forming ability on solid surfaces of periprosthetic infection-associated pathogens” Scientific Reports 12 (2022) 18669 († equally contributed) [IF: 4.6]
J.U. Jeong†, Y.G. Heo†, J.A. Cho†, Y. Roh, C.H. Lee*, S. J. Kim*, J.W. Lee*, " Nanostructure-based Wettability Modification of TiAl6V4 Alloy Surface for Modulating Biofilm Production: Superhydrophilic, Superhydrophobic, and Slippery Surfaces" Journal of Alloys and Compounds 923 (2022) 166492 († equally contributed) [IF: 6.2, JCR 9.6%]
Y. Kim, W. Hwang, H. Cho and J.W. Lee*, “A study on the minute change of the alumina surface structure according to the anodizing conditions for the production of a robust wettability-modified surfaces”, Surface & Coatings Technology 439 (2022) 128453 [IF: 5.4, JCR 16.7%]
K. Leeladevi, M. Arunpandian, J. Vinoth Kumar, T. Chellapandi, G. Mathumitha, J.W. Lee, E.R. Nagarajan*, "CoWO4 decorated ZnO nanocomposite: Efficient visible-light-activated photocatalyst for mitigation of noxious pollutants", Physica B: Physics of Condensed Matter 626 (2022) 413493 [IF: 2.8]
J. Anupriya, R. Rajakumaran, R. Karthik, J.V. Kumar, J.J. Shim, P.M. Shafi, J.W. Lee and S.M. Chen*, "Raspberry-like CuWO4 hollow spheres anchored on sulfur-doped g-C3N4 composite: An efficient electrocatalyst for selective electrochemical detection of antibiotic drug nitrofurazone" Chemosphere 296 (2022) 133997 [IF: 8.8, JCR 10.8%]
J.W. Lee*, K. Kim, G. Ryoo, J. Kim, J.V. Kumar and W. Hwang, “Fabrication of super-hydrophobic/hydrophilic patterned surface on three-dimensional structures”, Applied Surface Science 576 (2022) [IF: 6.7, JCR 2.4%, 1st ranked journal]
K. Kim, K. Lee, J. Choi, W. Hwang* and J.W. Lee*, “Selective Allowance of Precipitation from Oversaturated Solution Using Surface Structures” ACS Omega 7 (2022) 987-993 [IF: 4.1]
Y.G. Heo†, C.L. Kim†, K.M. Kim, K. Lee, W. Hwang and J.W. Lee*, “Ventilator integrated triboelectric nanogenerator based on structure of centrifugal break”, Surfaces and Interfaces 27 (2021) [IF: 6.2, JCR 11.9%] († equally contributed)
J.U. Jeong, D.Y. Ji, K.Y. Lee, W. Hwang and J.W. Lee*, “Effect of Structure complexity on interfacial droplet behavior using superhydrophobic titanium surface for preventing filmwise condensation” Materials 14 (2021) [IF: 3.4]
J. Anupriya, S.M. Badulal, T.W. Chen, S.M. Chen, J.V. Kumar, J.W. Lee, S.P. Rwei, J. Yu and Richard Yu, “Facile Hydrothermal Synthesis of Cubic Zinc Ferrite Nanoparticles for Electrochemical Detection of Anti-inflammatory Drug Nimesulide in Biological and Pharmaceutical Sample”, International Journal of Electrochemical Science 16 (2021) [IF: 1.5]
J.H. Kang, J.W. Lee, J.Y. Kim, J.W. Moon, H.S. Jang and S.Y. Jung, “Effect of mesh wettability modification on atmospheric and industrial fog harvesting”, Frontiers in Physics, section Interdisciplinary Physics 9 (2021) 680641 [IF: 3.1]
K. Leeladevi, M. Arunpandian, J.V. Kumar, M. Thiruppathi, T. Chellapandi, J.W. Lee, E.R. Nagarajan*, “Fabrication of 3D pebble-like CeVO4/g-C3N4 nanocomposite: A visible light-driven photocatalyst for the mitigation of organic pollutant”, Diamond & Related Materials 116 (2021) 108424 [IF: 4.1]
J.W. Lee, D.Y. Ji, K.Y. Lee and W. Hwang*, “A Study of Droplet-Behavior Transition on Superhydrophobic Surfaces for Efficiency Enhancement of Condensation Heat Transfer”, ACS Omega 5 (2020) 27880-27885 [IF: 4.1]
S. Kim, J.W. Lee, W. Hwang*, “One-step Eco-friendly Superhydrophobic Coating Method Using Polydimethylsiloxane and Ammonium Bicarbonate”, ACS Applied Materials & Interfaces 12 (2020) 28869-28875 [IF: 9.5, JCR 15.9%]
D.Y. Ji, J.W. Lee, D. Kim, W. Hwang and K. Y. Lee*, “Effective reduction of non-condensable gas effects on condensation heat transfer: Surface modification and steam jet injection”, Applied Thermal Engineering 174 (2020) 115264 [IF: 6.4, JCR 6.2%]
G. Jun, J.W. Lee, Y. Shin, K. Kim and W. Hwang* “Solvent-aided direct adhesion of a metal/polymer joint using micro/nano hierarchical structures”, Journal of Materials Processing Technology 285 (2020) 116744 [IF: 6.3]
J.W. Lee, S. Kim, S. Lee and W. Hwang*, “Exponential promotion and suppression of bubble nucleation in carbonated liquid by modification of surface wettability”, Applied Surface Science 512 (2020) 145709 [IF: 6.7, JCR 2.4%, 1st ranked journal]
H.R. Park†, J.W. Lee†, D.S. Kim, J.Y. Sim, I. Song and W. Hwang*, “Arrangement optimization of water-driven triboelectric nanogenerators considering capillary phenomenon between hydrophobic surfaces”, Scientific Reports 10 (2020) 1126. [IF: 4.6] († equally contributed)
D. Yoo, S. Lee, J.W. Lee, K. Lee, E.Y. Go, W. Hwang, I. Song, S.B. Cho, D. Choi, J.Y. Sim and D.S. Kim*, “Reliable DC voltage generation based on the enhanced performance triboelectric nanogenerator fabricated by nanoimprinting-poling process and an optimized high efficiency integrated circuit”, Nano Energy 69 (2019) 104388 [IF: 17.6, JCR 5.1%]
D.Y. Ji, J.W. Lee, W. Hwang and K.Y. Lee*, “Experimental study of condensation heat transfer on a horizontal aluminum tube with superhydrophobic characteristic”, International Journal of Heat and Mass Transfer 134 (2019) 286-295. [IF: 5.2, JCR 12%]
D. Yoo, E.Y. Go, D. Choi, J.W. Lee, I. Song, J.Y. Sim, W. Hwang and D. S. Kim*, “Increased Interfacial Area between Dielectric Layer and Electrode of Triboelectric Nanogenerator toward Robustness and Boosted Energy Output”, Nanomaterials 9 (2019) 71. [IF: 5.3]
J.W. Lee, J. Jeong, D. Yoo, K. Lee, S. Lee, D. S. Kim, J.Y. Sim and W. Hwang*, “Pump drill combined triboelectric nanogenerator as a practical substitution for batteries of intermittently used devices”, Nano Energy 56 (2019) 612-618. [IF: 17.6, JCR 5.1%]
K. Lee, J.W. Lee, K. Kim, D. Yoo, I. Song, D.S. Kim, J.Y. Sim and W. Hwang*, “A spherical hybrid triboelectric nanogenerator for enhanced water wave energy harvesting”, Micromachines 9 (2018) 598. [IF: 3.4]
J.W. Lee and W. Hwang*, “Theoretical study of micro/nano roughness effect on water-solid triboelectrification with experimental approach”, Nano Energy 52 (2018) 315-322. [IF: 17.6, JCR 5.1% in Materials Science, Multidisciplinary]
J.W. Lee and W. Hwang*, “Fabrication of a superhydrophobic surface with fungus-cleaning properties on brazed aluminum for industrial application in heat exchangers”, Applied Surface Science 442 (2018) 461-466. [IF: 6.7, JCR 2.4%, 1st ranked journal]
J.W. Lee and W. Hwang*, “Simple fabrication of superoleophobic titanium surfaces via hierarchical microhorn/nanoporous structure growth by chemical acid etching and anodization”, Journal of Alloys and Compounds 728 (2017) 966-970. [IF: 6.2, JCR 9.6%]
J.W. Lee and W. Hwang*, “Exploiting the silicon content of aluminum alloys to create a superhydrophobic surface using the sol–gel process”, Materials letters 168 (2016) 83-85. [IF: 3.0]
H. Cho, J.W. Lee, S. Lee and W. Hwang*, “Durable superhydrophilic/phobic surfaces based on green patina with corrosion resistance”, Physical Chemistry Chemical Physics 17 (2015) 6786-6793. [IF: 3.3]