We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-25 · 7 min read · Independent comparison
If you want a workout-first pair of earbuds with active noise cancellation, a secure rotating over-ear hook and a bass-forward tuning, choose Anker Soundcore; if you need an open-ear design that keeps your ear canal clear, gives you situational awareness on the road and uses the newer Bluetooth 6.0 radio, choose Conyat 6.0.
• Anker Soundcore — biggest strength: a true in-ear fit with 210° rotatable ear hooks, active noise cancellation and BassUp-tuned dynamic drivers. That combination is built for locking sound in during hard training.
• Anker Soundcore — biggest trade-off: it seals your ear canal and cancels background noise, so you are deliberately cut off from traffic, training partners and the world around you. That is a feature in the gym and a drawback on the road.
• Conyat 6.0 — biggest strength: an open-ear design that leaves the ear canal completely unobstructed, at roughly 6.7g per earpiece, with Bluetooth 6.0 and an IP7 waterproof rating.
• Conyat 6.0 — biggest trade-off: no noise cancellation at all, no 3.5mm jack, and a sound profile that lets the outside world in by design. Bass-heavy listeners who want isolation will not get it here.
• Who Anker Soundcore is for: indoor and gym athletes who want deep bass, noise blocking and workout-proof stability.
• Who Conyat 6.0 is for: runners, cyclists and commuters who want to hear their surroundings, plus anyone who finds in-ear tips uncomfortable over long sessions.
The Soundcore Sport X10 is an in-ear workout earbud, and everything about its design says "gym." The headline feature is the hook: each earpiece has an over-ear hook that rotates up to 210°, so you can dial in the angle that sits right on your ear shape instead of accepting whatever the factory position gives you. In my opinion that is the single most useful idea here, because the number one reason people give up on workout buds is that they shift mid-set.
Sound-wise, this is a bass-first product. The spec sheet lists a dynamic driver, a 20Hz–20kHz frequency range and 32 ohm impedance, and the design pairs that with BassUp processing that intensifies low-end output. If your motivation comes from a heavy low end during lifting or intervals, this is the tuning you want. There is also SweatGuard, which the design describes as a sweatproof seal protecting the internal components — a sensible thing to have when the earbuds live in a sweaty environment.
The other half of the story is what it blocks. This model has active noise cancellation, and the six microphones with noise cancellation are aimed at keeping your voice clear on calls while suppressing background noise, with a separate Wind Noise Reduction mode for outdoor talking. Bluetooth 5.2 handles the wireless link with a rated range of around 10 meters. Battery is quoted at 32 hours with the charging case, and the case itself has a one-press lid button so you can open it one-handed.
Conyat 6.0: Who It's For
The Conyat 6.0 (model X5S) is the opposite philosophy. It is an open-ear headphone, meaning the driver sits outside your ear canal rather than plugging it. The ear canal stays completely unobstructed, and the ergonomic contour is designed to rest gently against the ear rather than press into it. Each earpiece weighs roughly 6.7g, which is the kind of number that matters when you wear something for a three-hour shift, a long run or an entire commute. In my opinion, this is the category to look at if in-ear tips have always felt like a compromise.
The second thing that stands out is the radio. This uses Bluetooth 6.0, and the design describes quick pairing, a stable low-latency connection and easy switching between devices, with automatic pairing as soon as you lift the earbuds out of the case. Compatibility is listed as effectively any Bluetooth-enabled device. For anyone who has fought a drop-out mid-run, a newer Bluetooth generation is a legitimate reason to care.
Then there is the safety angle, which is really the whole point of open ear. Because nothing seals your ear, you stay aware of cars, bikes, voices and crossing signals while music or a call plays. The design explicitly frames this around cycling, walking, running, exercising and driving. There is an ENC microphone for calls, and the earbuds are rated IP7 waterproof — a high level of water resistance that suits rain, sweat and heavy sessions.
The trade-offs are real, though. Noise control is listed as none — you cannot switch off the world, and on a loud train you will hear the train. There is no 3.5mm jack, so it is Bluetooth only. And open-ear sound simply does not pressurise your ear the way an in-ear seal does, so bass will not hit the same way. Conyat backs the product with a 30-day unconditional refund and a 2-year warranty, which is a longer coverage window than the 1-year warranty listed on the Soundcore.
Who should buy it: runners, cyclists, walkers, delivery riders and commuters who want music plus awareness, and long-wear users who dislike plugged ears. Who should skip it: anyone who wants to disappear into a bass-heavy mix on a plane or a noisy gym floor.
• Best for blocking out the gym → Anker Soundcore. Active noise cancellation plus an in-ear seal is the only one of the two that actually removes background noise.
• Best for hearing traffic → Conyat 6.0. The open-ear design keeps your ear canal clear, which is the entire reason this category exists.
• Best for bass → Anker Soundcore. BassUp processing and a sealed in-ear fit are built to push low frequencies; the open design cannot match that pressure.
• Best for all-day comfort → Conyat 6.0. Roughly 6.7g per earpiece with nothing inserted into the canal is the more forgiving setup over long hours.
• Best for Bluetooth generation → Conyat 6.0. Bluetooth 6.0 versus Bluetooth 5.2 on the Soundcore.
• Best for fit adjustment → Anker Soundcore. The 210° rotating ear hooks let you physically tune the angle, which the Conyat's contoured hooks do not offer.
• Best for water resistance ratings → Conyat 6.0. IP7 is explicitly listed; the Soundcore's protection is described as SweatGuard, aimed at sweat rather than full water exposure.
• Best for calls in wind → Anker Soundcore. Six microphones with noise cancellation plus a dedicated Wind Noise Reduction mode is the more call-focused setup.
• Best for warranty coverage → Conyat 6.0. A 2-year warranty with a 30-day refund window versus a 1-year warranty.
If I were buying for myself and my training happened indoors, I would take the Anker Soundcore Sport X10. The adjustable 210° hooks, active noise cancellation and BassUp tuning are a coherent package for lifting, machines and treadmill work, and the fit is something you can actually dial in rather than hope for. If my training or commuting happened outdoors, or if I simply cannot stand things in my ears, I would take the Conyat 6.0 without much hesitation — the open-ear design, the light 6.7g build, Bluetooth 6.0 and IP7 water resistance line up exactly with that life. Neither is universally better; they solve different problems. Check the current price on Amazon before you commit, since that is the one variable I cannot weigh for you.
FAQ
how to open ear headphones work
how to wear open ear headphones
Hook the earpiece over the top of your ear so the driver sits just outside the canal, not inside it, then let it rest against the ear contour. Adjust the hook until it feels stable without pressing. Because the Conyat 6.0 weighs roughly 6.7g per side, it should feel barely noticeable once positioned correctly — if it pinches, the hook is sitting too tight.
how to use open ear headphones
Pair them over Bluetooth, then control playback with the touch controls on the earpieces. The Conyat 6.0 pairs automatically when you lift the earbuds out of the charging case and works with virtually any Bluetooth-enabled device. Because there is no noise cancellation, keep the volume moderate in loud places — you are hearing your surroundings on purpose, so use that awareness rather than fighting it.
how to open ear headphones stay in during running
They stay in through the hook that wraps over the ear plus the light weight of the earpiece — less mass means less momentum to pull them loose. The Conyat 6.0 combines that with an IP7 waterproof rating, so sweat and rain are accounted for. For the most secure fit, position the hook so the driver sits level with the canal opening rather than above or below it.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Xmenha Gaming Open Ear vs Conyat Open-Ear Headphones, PowerLocus Over-Ear Headphones vs Jiunai Open Ear: Aux Wired, Bluedio H Turbine vs Tuemvia Open Ear Headphones