Air Conditioners Perth - wt108

Spraying Down And Wanting For Leaks - Air Conditioners Perth

So that they actually did assume this through. So far as a diy um, a daddy not done, this is where the refrigerant lines came out, the back facet of the home, the condensate is on the bottom. That was an essential half in the instructions and I spray foamed all up in there. So far as I may attain inside the wall cavity utilizing a low density window and door foam, I simply screwed on this backer plate, which is the primary part of putting the quilt over the lines.

Oh uh, I have some nylog all proper, so, as you can see, these are customized fittings. The line set connections are full, so at this level we need to really launch the refrigerant and test for leaks, so to do that. We'll take these two mud: caps off now inside is a little bit valve and it has an allen key on it and so they sent the allen key with it, which is superior, so it says to slowly open this and you might hear a hissing sound yeah.

Very, very slight little hissing sound there. It says open all of it the way in which now we'll open up the underside one and open its valve to test for leaks with soapy water or what i will use. I have some leak detection, fluid we're reading for any bubbles. Okay, up prime we're spraying these ones down and we're searching for any leaks, and I do not see any now one thing that basically impressed me about these refrigerant lines is that they're wrapped on this steel spiral spring, and that is an anti-kink.

Page updated

Google Sites

Report abuse