How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-02 · 8 min read · Independent comparison
• Aenllosi Hard Carrying Case — biggest strength: a crush-resistant, water-resistant EVA hard shell built specifically around Beyerdynamic DT 770 / 880 / 990 PRO 32, 80 and 250 Ohm over-ear studio headphones, with an internal mesh pocket for small accessories.
• Aenllosi Hard Carrying Case — biggest trade-off: it is a case only. No headphones, no cable, no adapter. If you don't already own the Beyerdynamic model it's molded for, there's nothing here for you.
• POLSEN HPC-A30-MK2 — biggest strength: a real pair of wired closed-back over-ear monitor headphones with 32 ohm impedance, 102 dB sensitivity, a 20 Hz–20,000 Hz dynamic driver, swiveling/rotating earcups, a 10-foot cable and a 1/4-inch adapter in the box.
• POLSEN HPC-A30-MK2 — biggest trade-off: it's a plastic-bodied wired headphone with a limited one-year manufacturer warranty and no wireless or active noise cancellation — sound isolation comes from the over-ear seal, not electronics.
• Pick the Aenllosi case if you're protecting an existing Beyerdynamic DT PRO set. Pick the POLSEN HPC-A30-MK2 if you need something to actually listen with.
The Aenllosi Hard Carrying Case is a single-purpose product, and it's honest about that. It's molded as a replacement case for Beyerdynamic DT 770, DT 880 and DT 990 PRO over-ear studio headphones across the 32, 80 and 250 Ohm versions. The shell is EVA — ethylene vinyl acetate — which is the same family of material used in a lot of crush-resistant hard cases, and Aenllosi describes it as crush resistant, anti-shock and water resistant. That combination is what you want if your headphones live in a backpack, ride in a car trunk, or get stacked under other gear between sessions. Bumps, scratches and the occasional splash are exactly the threats a soft pouch won't handle and this will.
The details that matter day to day are small but useful. There's an internal mesh pocket, which is where I'd keep a spare cable, a 1/4-inch adapter or a small cleaning cloth so nothing rattles loose against the earcups. The listed external size is roughly 8.27 by 6.88 by 4.13 inches, and the case weighs about 200 grams — light enough that it doesn't turn a portable headphone into a burden. The color is grey, the shell is hard, and the unit count is one case. That's the whole product.
Who should buy it: anyone who already owns a Beyerdynamic DT 770, 880 or 990 PRO and wants a dedicated hard shell instead of stuffing studio headphones into a bag loose. Who should skip it: anyone who doesn't own those headphones, anyone expecting cables or adapters to be included, and anyone who wants a soft, squishable pouch rather than a rigid box. Note the compatibility line carefully — it's listed for the DT PRO 770 32/80/250 family, so if your headphones are a different model, this isn't the molded fit for you.
The POLSEN HPC-A30-MK2 is the opposite kind of purchase: it's the thing you listen through. It's a wired, closed-back, over-ear studio monitor headphone with a circumaural (around-the-ear) fit, a plastic body in black, and a dynamic driver covering 20 Hz to 20,000 Hz. Impedance is 32 ohm and sensitivity is 102 dB, which is the spec combination that tells you it's meant to be driven by ordinary gear — a phone, a tablet, a laptop headphone jack — rather than needing a dedicated headphone amp to get loud. That's a meaningful design choice for anyone monitoring a podcast on a laptop or tracking a vlog on a smartphone.
The feature list is clearly aimed at people who move between listening and working. The earcups swivel and rotate: rotate them 90 degrees for one-ear handheld monitoring, or swivel one cup for on-the-shoulder work while keeping an ear free. That's the DJ use case, and POLSEN also mentions a tuned bass response for low-end clarity — useful when you're cueing tracks in a loud room. The over-ear seal is doing the isolation work here, which POLSEN frames as keeping sound in and outside noise out, whether that's a busy street or a noisy club. A padded headband is there for longer sessions.
In the box you get the headphones, a 10-foot cable, and a 1/4-inch TRS adapter for the 3.5 mm jack — so it plugs into both consumer devices and pro audio gear without a separate trip to the store. There's also a media control function and app-based control method listed, and a limited one-year manufacturer warranty. Who should buy it: DJs who want one-ear monitoring, podcasters and broadcasters tracking audio on a laptop, and anyone who wants a cheap-to-own wired over-ear for mobile listening with real isolation. Who should skip it: anyone who needs wireless, anyone who wants active noise cancellation rather than passive isolation, and anyone who specifically wants the Beyerdynamic fit the Aenllosi case is molded around.
• Best for protecting studio headphones → Aenllosi Hard Carrying Case. It's molded for Beyerdynamic DT 770/880/990 PRO 32/80/250 Ohm models with a crush-resistant, water-resistant EVA shell.
• Best for actually listening to audio → POLSEN HPC-A30-MK2. 32 ohm, 102 dB, 20 Hz–20,000 Hz dynamic drivers, wired.
• Best for DJ and one-ear monitoring → POLSEN HPC-A30-MK2. Swiveling and 90-degree rotating earcups plus a tuned bass response.
• Best for travel and storage of a Beyerdynamic set → Aenllosi Hard Carrying Case. Hard shell, roughly 200 g, with an internal mesh pocket for cables and adapters.
• Best for plug-and-play with pro and consumer gear → POLSEN HPC-A30-MK2. 3.5 mm jack plus an included 1/4-inch TRS adapter and a 10-foot cable.
• Best for laptop, podcast and vlog monitoring → POLSEN HPC-A30-MK2. Built for mobile devices and laptop audio with over-ear isolation.
• Best if you own nothing yet → POLSEN HPC-A30-MK2. The Aenllosi case ships empty by design, so it only makes sense as a companion to headphones you already have.
• Best as an add-on purchase → Aenllosi Hard Carrying Case. It's the accessory, not the main event, and it pairs with a specific headphone family.
If I had to pick one, I'd buy the POLSEN HPC-A30-MK2 — because it's a complete product that does something on its own, while the Aenllosi Hard Carrying Case is only useful once you already own the exact Beyerdynamic headphones it's molded for. In my opinion the POLSEN wins on flexibility: 32 ohm impedance and 102 dB sensitivity mean it works straight out of a phone or laptop, the rotating earcups cover DJ-style one-ear monitoring, and the included 10-foot cable and 1/4-inch adapter remove the usual extra purchases. The one case where I'd flip that recommendation is if you already own a DT 770, 880 or 990 PRO and your real problem is storage — then the Aenllosi hard shell is the smarter buy, and the POLSEN would be redundant. Check the current price on Amazon for whichever one matches your situation before you commit, since that's the only variable this comparison can't settle for you.
how to wear over ear headphones
Over-ear (circumaural) headphones like the POLSEN HPC-A30-MK2 are designed so the earcups sit around your ears rather than pressing on them. Seat the padded headband on the crown of your head, then adjust each cup so the cushion fully surrounds the ear — that seal is what gives you the sound isolation the over-ear design is built for. For one-ear DJ monitoring, rotate or swivel a cup so it sits off the ear or against your shoulder.
how do over ear headphones work
They use drivers inside sealed earcups to convert the audio signal into sound, and the closed-back design keeps that sound contained while blocking outside noise. The POLSEN HPC-A30-MK2 uses a dynamic driver rated 20 Hz–20,000 Hz with 32 ohm impedance and 102 dB sensitivity, which means a normal phone or laptop jack can drive it. Because the cups surround the ear, the physical seal — not electronics — does the isolating.
are studio headphones worth it
It depends on what you're doing. If you need to monitor audio accurately on a laptop, in a home studio, or while recording, a closed-back over-ear monitor like the POLSEN HPC-A30-MK2 is a practical tool — it isolates sound, prevents leakage, and stays comfortable thanks to the padded headband. If you only want casual wireless listening, a wired studio headphone will feel like the wrong tool.
what headphones do professional studios use
Studios tend to rely on closed-back over-ear monitor headphones for tracking and isolation, and open or semi-open models for other tasks. The Aenllosi Hard Carrying Case is built around one well-known studio family — Beyerdynamic DT 770, 880 and 990 PRO in 32, 80 and 250 Ohm versions — which tells you that family is common enough in studio and home-studio use to justify a dedicated hard case. The POLSEN HPC-A30-MK2 follows the same closed-back over-ear monitor formula at 32 ohm for easier driving.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: COMSOON Receiver vs DOQAUS Headphones Over Ear, Belkin SoundForm Inspire vs New Bee 2: Wireless Travel, Shure SRH840 vs FiiO FT1, Raynic White Noise Machine vs Konohan 32: Headphones for