We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-03 · 7 min read · Independent comparison
If you want a drop-in refresh for a single headphone model with a full year of manufacturer-backed coverage, choose ACCOUTA Earpads Cushion Compatible; if you need fresh memory foam cushions for an Audio-Technica M-series studio monitor — and you care most about keeping the original tuning intact — choose Elecphbo Replacement Earpads Compatible.
• ACCOUTA's biggest strength: purpose-built for the Urbanears Plattan, with skin-friendly protein leather over memory foam and a one-year warranty against manufacturer defects.
• ACCOUTA's biggest trade-off: it fits exactly one headphone family. If you don't own a Plattan, it isn't for you.
• Elecphbo's biggest strength: covers four M-series models (M50X, M40X, M30X, M20X) plus M-series X and BT variants with the same mounting ring, using slow-rebound memory foam and an acoustically transparent build.
• Elecphbo's biggest trade-off: its whole pitch is the M-style mounting system — no Plattan, no generic fit.
• Who ACCOUTA is for: Plattan owners who want a comfortable, warranty-backed replacement with zero guesswork.
• Who Elecphbo is for: M-series studio monitor users who want to restore the acoustic seal and sound signature rather than just swap foam.
ACCOUTA does one job and does it narrowly: it replaces the ear pads on the Urbanears Plattan over-ear headphone. That's the entire compatibility list. The pad itself is white faux leather wrapped around memory foam, so the design intent is comfort first — a soft, skin-friendly surface that stays plush against your ear rather than hardening into a flat disc after a few months of daily use.
The memory foam matters more than it sounds. On an on-ear-style headphone like the Plattan, the pad is the only thing standing between the driver housing and your ear, so once the original foam compresses, the headphone starts to feel like it's pinching. A slow-rebound memory foam cushion spreads that pressure rather than concentrating it. In my opinion, that's the main reason to buy this over a generic pad — the shape is cut for this specific headphone, so you're not fighting a fit that's "close enough."
Who should buy it: you own a Plattan, your current pads are worn, white is the look you want, and you'd rather deal with a manufacturer that answers messages than gamble on an unbranded cushion. Who should skip it: anyone with a different headphone. The compatibility line is Plattan only — no M-series, no universal sizing, no adapters mentioned. If your headphones aren't Plattans, this pad simply isn't in the conversation.
Elecphbo Replacement Earpads Compatible: Who It's For
Elecphbo targets a completely different buyer: the person with Audio-Technica M-style studio monitors. The compatibility list is M50X, M40X, M30X and M20X, and it also claims a fit on most M-series X and BT variants that use the same mounting mechanism. The pads follow the original dimensions and snap in with no tools — align the ring, press firmly. That detail matters, because M-series pads don't screw on, and a pad that's slightly off-dimension will either refuse to seat or work loose.
The material story is where this listing gets specific. Protein leather on the outside, slow-rebound memory foam inside, and the foam is described as conforming to your ear shape and distributing pressure around glasses arms and temples. If you wear glasses with over-ear headphones, you already know the failure mode: the pad presses the frame into your skull until you take a break. A memory foam cushion that gives at that contact point is the practical fix.
The acoustic claims are the more interesting part. Elecphbo argues that flattened, worn cushions break the seal — which is true of any over-ear pad — and that the result is bass leakage and ambient noise creeping in. Their pad is described as acoustically transparent, with the same depth as the original and precision-cut foam that preserves driver distance and frequency response. You can't verify tuning from a spec sheet, but the design logic is sound: pad depth and density are what change how an M50X sounds, and a pad that matches original depth is the conservative choice. The company also calls out passive noise isolation — blocking keyboard clicks and air-conditioner hum so you can monitor at lower volumes.
Durability gets its own bullet: an upgraded coating meant to resist sweat erosion and heat, so you avoid the peeling that plagues cheap protein leather, and a surface you can wipe clean with a damp cloth. There's a one-year warranty too.
Side-by-Side: Which Should You Choose?
• Best for Plattan owners → ACCOUTA Earpads Cushion Compatible. It's the only one of the two that fits that headphone at all.
• Best for Audio-Technica M50X / M40X / M30X / M20X → Elecphbo Replacement Earpads Compatible. Four models plus X and BT variants on one mounting ring.
• Best for preserving your headphone's tuning → Elecphbo. Matched original depth and precision-cut foam are explicitly aimed at keeping frequency response and low-end punch intact.
• Best for glasses wearers → Elecphbo. The slow-rebound foam is described as relieving pressure on glasses arms and temples.
• Best for noise isolation → Elecphbo. Protein leather plus a restored seal is the whole point of its isolation claim.
• Best for a written warranty and hands-on support → ACCOUTA. One year against defects, free replacement or refund, and a stated 24-hour reply time.
• Best for easy cleaning and sweat resistance → Elecphbo. Enhanced coating, wipe with a damp cloth.
• Best color match for a white headphone → ACCOUTA. White faux leather; Elecphbo is black only.
For most people reading this, the deciding factor is which headphone is sitting on your desk — these two pads don't overlap at all. If I had to pick one as the more capable product, I'd take Elecphbo Replacement Earpads Compatible. In my opinion it does more: four-model compatibility, an acoustic argument for matched pad depth, sweat-resistant coating, and a design that specifically addresses glasses pressure. ACCOUTA is the right call only if you own a Plattan and want a white, warranty-backed pad from a manufacturer that answers within a day. Buy the one that matches your headphone, not the one that sounds better on paper.
how should over ear headphones fit
The pad should sit flat around your ear and seal against your head without clamping. On the Elecphbo pads, the slow-rebound memory foam is designed to conform to your ear shape and distribute pressure rather than press in one spot. On the ACCOUTA pads, the memory foam and protein leather are meant to keep the ear comfortable through long sessions.
can you sleep with over ear headphones
That's about your headphones, not the pads. Neither listing describes sleep or side-sleeping use, and over-ear headphones generally aren't built for it. What the pads do affect is pressure: memory foam in both the ACCOUTA and Elecphbo cushions is designed to spread contact pressure, which is what makes extended wear more tolerable.
how to wear over ear headphones properly
Slide the headband so each pad surrounds your ear rather than resting on it, and let the memory foam settle into place. Elecphbo's pads are meant to snap onto the M-series ring with no tools — align the ring and press firmly. ACCOUTA's are cut for the Plattan and seat the same way; the company offers help if installation gives you trouble.
Both carry a one-year warranty. Elecphbo specifically claims an upgraded protein leather coating that resists sweat erosion and high temperatures and can be wiped clean with a damp cloth. ACCOUTA's warranty covers manufacturer defects with free replacement or refund, and it states a 24-hour response window for questions.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Aisryntek USB Gaming Microphone vs Tobysome QC35, Jzones Open Ear Clip vs Kicoeon Earbuds, Phiaton PPU-TN0610BK01 vs ScyKei Earbuds: Hybrid ANC Earbuds, Rulbovs NE76 vs Toztnix Neckband