Verizon routers are among the best selling routers in the market. They have a variety of features and support the latest technology. Setting up a Wi-Fi network at home might sound intimidating but it is not at all difficult with the help of wireless routers. The most important perk of using the Wi-Fi is that it helps us to enjoy high speed internet without worrying about data usage cost and limitations. This guide will help you with Verizon FiOS router login without facing any difficulty. You will receive an installation CD, router manual, adapter and an Ethernet cable while purchasing the router. All these things are essential for setting up the router. Next, you have to make sure that the router is placed at an optimal position where it is accessible to all the internet devices without any interruption or much hindrance. Then, connect an Ethernet cable to the router and modem. Connect an internet device like computer to the router using an Ethernet cable. Now, let’s have a look at the steps for Verizon router login. Follow the steps mentioned below.
Steps to login to Verizon router:
Open the web browser (Chrome, Safari, Firefox) and type ‘192.168.1.1’
Press Enter and you would be directed to the router’s login page.
Enter, Verizon default router login to go to settings. The Verizon FiOS router default login credentials are as follows- username: admin, password: admin.
Press, continue and you can modify the settings, change password and username from here.
These were the steps for logging in to your router. Now, if your devices have any trouble connecting to the internet or you do not remember the log in credentials of the router. You can factory reset Verizon router and enter through the default credentials. Before resetting the router, reboot the router and perform the power cycle to see if that fixes the problem. Make sure that the router is placed properly on a smooth surface. There should be no loose wires or plugs connected to the router. Check all the electric socket.
Steps to reset Verizon router:
Locate the reset button on the router.
Press and hold the reset button for a few seconds.
Release when the lights on the router starts flickering.
It will take few minutes and the router will reboot.
This will erase the current configuration of the router and set it back to default factory settings.