How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-01 · 8 min read · Independent comparison
• ACAGET USB C Headphone — biggest strength: a USB Type C connection with a built-in Hi-Fi DAC and inline mic/remote, so one cable handles audio, calls and volume on newer phones and tablets.
• ACAGET USB C Headphone — biggest trade-off: it only works with USB-C devices, so anything with a round 3.5mm hole is out unless you add an adapter.
• Yatloml Earbuds — biggest strength: a standard 3.5mm jack plus a 3.8 ft tangle-free cord, which makes it the more universal pick for laptops, tablets, MP3 players and older handsets.
• Yatloml Earbuds — biggest trade-off: the data sheet lists no microphone, so it's a listening-first bud rather than a call-first one.
• Pick ACAGET if your phone is USB-C and you want calls, controls and noise isolation in one cable.
• Pick Yatloml if you need one pair of wired buds that plugs into almost anything with a headphone jack.
The ACAGET USB C Headphone is built around one idea: replace the headphone jack with a USB-C plug that carries both digital audio and a microphone. Inside is a Hi-Fi certified DAC converter, which is the part that turns the digital signal from your phone into sound. That matters because a lot of USB-C phones won't output audio through a passive adapter — they need that converter chip in the cable or the bud itself. ACAGET put it in the earphone, so plugging in is a one-step job rather than a dongle hunt.
The physical design is a classic in-ear bud with a 45-degree angled nozzle. That angle is there to seat the tip into your ear canal rather than rest against it, which is how the noise isolation actually happens — the silicone tip forms a seal and physically blocks ambient sound. There's no active noise cancellation here, and the data sheet doesn't claim any. It's passive isolation, done with ear tips. You get three pairs of silicone tips in different sizes, plus a storage case, a cable clip and two extra tips in the box, so you can size the seal to your own ears. The driver is 13mm, impedance is 32 ohm, sensitivity is 105 dB, and the frequency range runs 20 Hz to 20,000 Hz — a normal, full-range spec for a wired bud.
The inline module is where this one earns its place for a lot of buyers. There's a wired microphone plus a remote with button controls for volume, track switching and answering or rejecting calls. For video conferences, home office calls, online broadcasts or gaming chat, that's the whole point: you plug in and you're ready, no pairing, no charging, no battery to run down. The earbuds are also magnetic, so they can hang around your neck between calls instead of tangling in a pocket.
Yatloml Earbuds: Who It's For
The Yatloml Earbuds take the opposite approach: maximum compatibility, minimum fuss. The connector is a standard 3.5mm jack, and the data sheet is explicit that this is a wired-to-wired connection — no Bluetooth anywhere in the spec. That single detail is the reason to consider them. A 3.5mm plug works with laptops, tablets, MP3 players, and any phone that still has a headphone socket, without asking whether the port is USB-C or Lightning.
The design is a lightweight in-ear bud with an aluminum shell and a 3.8 ft cord that's described as tangle-free, using a double-layer cable construction for durability. Weight is listed at 0.02 kg, so these are the kind of buds you forget you're wearing. The nozzle is a standard in-ear shape rather than an angled one, and the fit kit is generous: three different sized rubber ear-tips plus two sets of memory foam eartips. That's worth calling out, because memory foam tends to expand and fill the ear canal more completely than silicone, which usually means a better passive seal and therefore more ambient noise blocked. Combined with the in-ear insertion depth, that's how the noise isolation is achieved here — again, physically, not electronically.
On the audio side, the driver is 10mm with a dynamic driver type, 16 ohm impedance, 112 dB sensitivity, and a 20 Hz to 20,000 Hz frequency range. The low impedance and high sensitivity combination is the interesting part: it means the buds don't need much power to get loud, which is exactly what you want when the source is a laptop headphone jack or a cheap MP3 player rather than a phone with a decent amp. The brand positions the sound as bass-forward with a wide frequency range for stereo music.
Side-by-Side: Which Should You Choose?
• Best for phone calls → ACAGET USB C Headphone. It's the only one of the two with a built-in microphone and inline remote for answering calls and adjusting volume.
• Best for device compatibility → Yatloml Earbuds. A 3.5mm jack fits laptops, tablets, MP3 players and older phones; the ACAGET is limited to USB-C devices.
• Best for USB-C phones → ACAGET USB C Headphone. The built-in DAC means it works with modern iPhone, Galaxy, Pixel, OnePlus and iPad models that have dropped the headphone jack.
• Best for a stronger passive seal → Yatloml Earbuds. Two sets of memory foam tips plus three rubber sizes gives you more ways to close off ambient noise than silicone tips alone.
• Best for louder output from weak sources → Yatloml Earbuds. At 16 ohm and 112 dB it needs less power to reach volume than the 32 ohm, 105 dB ACAGET.
• Best for bigger drivers and deep bass → ACAGET USB C Headphone. A 13mm dynamic driver against a 10mm one, paired with the DAC for lossless output.
• Best for tangle-free everyday carrying → Yatloml Earbuds. The 3.8 ft cord is described as tangle-free with double-layer protection, versus the ACAGET's magnetic neck-hang design.
• Best for a complete accessory kit → ACAGET USB C Headphone. Storage case, cable clip and extra tips are all included.
In my opinion, the ACAGET USB C Headphone is the one I'd buy, and the deciding factor is the DAC plus the microphone. If your phone is USB-C, that combination turns a pair of wired buds into a complete headset for calls, meetings and music with zero charging involved, and the angled 13mm in-ear design gives you real passive noise isolation on a commute or in an open office.
I'd only steer you to the Yatloml Earbuds if your devices are 3.5mm, or if you want the memory foam tips for a tighter seal and don't care about taking calls on them. They're the more universal, more forgiving pair — just not the more capable one.
how to noise cancelling wired headphones
Wired headphones don't cancel noise electronically — they block it physically. On both of these, the in-ear tip forms a seal in your ear canal that keeps ambient sound out. The trick is picking the right tip size: ACAGET includes three silicone sizes, and Yatloml adds two sets of memory foam tips on top of three rubber ones. A proper seal is what does the work.
what is the best wired noise cancelling headphones
There's no single answer, because it depends on your port. If your phone is USB-C, the ACAGET USB C Headphone is my pick — it has the built-in DAC, a 13mm driver, an inline mic and remote, and angled tips for isolation. If you're on 3.5mm, the Yatloml Earbuds are the better fit, with memory foam tips and a low 16 ohm impedance that's easy to drive.
is there wired noise cancelling headphones
Yes, in the sense of noise isolation rather than active cancellation. Both the ACAGET USB C Headphone and the Yatloml Earbuds list sound isolation as their noise control method, achieved through sealed in-ear tips. Neither data sheet mentions active noise cancellation, so expect them to reduce steady ambient noise rather than erase engine drone the way battery-powered ANC models do.
do these wired earbuds work with iPhone and Samsung
It depends on the port, not the brand. The ACAGET USB C Headphone lists USB-C compatibility with recent iPhone, Galaxy S and A series, Z Flip and Fold, Galaxy Tab, Pixel, OnePlus and iPad models. The Yatloml Earbuds use a standard 3.5mm jack, so they fit any iPhone, Samsung or other device that still has a headphone socket — check your model before choosing.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Altec Lansing Comfort Q+ vs Edifier W820NB: Ldac Headphones, Antool USB C Headphones vs LUDOS Zenith USB C: USB C, usb wired headphones, 1Mii Y8+ vs DIMITU Protein Leather Earpads