Digitax F2 Taximeter User Manual
The Digitax F2 is a taximeter that can measure and display the fare, distance, time, and other information related to a taxi service. It can also print receipts, store statistics, and communicate with other devices. The Digitax F2 is designed to be easy to use, reliable, and compliant with the regulations of different countries.
Digitax F2 Taximeter User Manual
This article will provide a brief overview of the Digitax F2 taximeter, its features, installation, operation, and programming. For more detailed information, please refer to the official technical manual or the user manual provided by Digitax.
Features of the Digitax F2 Taximeter
The Digitax F2 taximeter has the following features:
A large LCD display that shows the fare, distance, time, tariff, extras, and other information.
A thermal printer that can print receipts, statistics, and diagnostic reports.
A real-time clock that can automatically adjust the time and date according to the GPS signal.
A movement sensor that can detect the speed and direction of the vehicle.
A serial port that can connect to a mobile data terminal, a GPS receiver, a radio system, or other devices.
A memory that can store up to 255 tariffs, 255 extras, and 255 statistics.
A programming mode that allows the user to set various parameters such as tariffs, extras, currency, language, printer settings, etc.
A sealable cover that protects the taximeter from unauthorized tampering.
Installation of the Digitax F2 Taximeter
The Digitax F2 taximeter can be installed in different ways depending on the preferences of the user and the regulations of the country. The taximeter can be fixed to the dashboard or the windshield of the vehicle using screws, velcro, or double-sided tape. The taximeter can also be connected to different types of sensors such as optical, magnetic, or electronic. The taximeter can be powered by the vehicle's battery or by an external power supply. The taximeter can also be connected to other devices such as a mobile data terminal, a GPS receiver, a radio system, or a roof sign using serial cables.
The installation of the Digitax F2 taximeter should be done by a qualified technician following the instructions in the technical manual. The technician should also seal the taximeter using a plastic disk and a screw to prevent unauthorized access to the programming mode. The technician should also test the taximeter for proper functioning and calibration before handing it over to the user.
Operation of the Digitax F2 Taximeter
The Digitax F2 taximeter has five keys on its front side: OP, K1, K2, K3, and K4. These keys are used to control the taximeter's functions and modes. The taximeter has three main modes: FOR HIRE (or FREE), HIRED (or BUSY), and STOPPED (or PAUSED). The user can switch between these modes by pressing the OP key. The user can also use the other keys to perform various actions such as printing receipts, adding extras, changing tariffs, erasing statistics, etc. The user can also use the programming mode to set various parameters such as tariffs, extras, currency, language, printer settings, etc.
The operation of the Digitax F2 taximeter is simple and intuitive. The user can follow the instructions in the user manual or on the display screen to use the taximeter's functions and modes. The user can also refer to the technical manual for more detailed information on how to use and program the taximeter.
Conclusion
The Digitax F2 is a taximeter that can measure and display the fare, distance, time, and other information related to a taxi service. It can also print receipts, store statistics, and communicate with other devices. The Digitax F2 is designed to be easy to use, reliable, and compliant with the regulations of different countries. The user can install, operate, and program the taximeter following the instructions in the manuals provided by Digitax.
a104e7fe7e